Artemide Tolomeo Mini 100W E26 Table Lamp Notendahandbók

1. Inngangur

This manual provides comprehensive instructions for the safe and efficient use of your Artemide Tolomeo Mini 100W E26 Table Lamp. Please read this manual thoroughly before installation and operation, and retain it for future reference. The Artemide Tolomeo Mini is designed for indoor use, offering adjustable illumination with its articulated aluminum arm and shade.

2. Öryggisupplýsingar

• Gakktu úr skugga um að lamp is connected to a power source within the specified voltage svið (120V).
• Ekki fara yfir hámarksmagn peruvatnstage of 100W. Use an E26 (medium base) A19 compatible incandescent, compact fluorescent, or LED lamp.
• Always disconnect the power before cleaning, performing maintenance, or replacing the bulb.
• Forðastu að setja lamp in areas with excessive moisture or extreme temperatures.
• Ekki reyna að breyta lampRafmagnsíhlutir. Vísið til hæfs starfsfólks til að sinna viðgerðum.
• Haltu lamp fjarri eldfimum efnum.

3. Innihald pakka

Gakktu úr skugga um að allir íhlutir séu til staðar áður en samsetning hefst:

• Artemide Tolomeo Mini Lamp Arm and Head Assembly
• Ál Base
• Skuggi
• Rafmagnssnúra

Image 3.1: All components of the Artemide Tolomeo Mini Table Lamp, including the articulated arm, lamp head, base, and power cord.

4. Uppsetningarleiðbeiningar

1. Taka upp íhluti: Fjarlægið alla hluta varlega úr umbúðunum og setjið þá á hreint, slétt yfirborð.
2. Festu grunninn: Festu lamp's articulated arm assembly to the aluminum base. Ensure the connection is firm and stable.
3. Settu upp peruna: Insert an E26 (medium base) A19 compatible bulb (not included) into the lamp head socket. Do not exceed 100W.
4. Settu Lamp: Settu lamp á stöðugu, sléttu yfirborði.
5. Tengdu rafmagn: Stingdu rafmagnssnúrunni í venjulega 120V rafmagnsinnstungu.

Image 4.1: The Artemide Tolomeo Mini Table Lamp fully assembled and ready for use.

5. Notkunarleiðbeiningar

• Kveikt/slökkt: Lamp features an On/Off switch located on the lamp head. Press or touch the switch to turn the light on or off.
• Stilla stöðu: Lamp's arm structure, made of extruded aluminum, and joints with tension control knobs allow for full adjustability. Gently manipulate the arm and head to direct light as desired. The shade offers 360-degree rotation.

6. Viðhald

• Þrif: Aftengdu lamp from power. Use a soft, dry cloth to wipe down the aluminum surfaces and shade. Avoid abrasive cleaners or solvents.
• Skipt um peru: Gakktu úr skugga um að lamp is unplugged and the bulb has cooled completely. Unscrew the old bulb and screw in a new E26 (medium base) A19 compatible bulb, not exceeding 100W.
• Joint Tension: The tension control knobs on the joints can be adjusted if the arm becomes too loose or too stiff. Turn clockwise to tighten, counter-clockwise to loosen.

7. Bilanagreining

Lamp kveikir ekki á:

Athugaðu hvort rafmagnssnúran sé vel tengd í innstunguna og hvort hún sé í sambandi.amp. Verify that the bulb is correctly installed and not burnt out. Test the outlet with another device.

Ljós blikkar:

Ensure the bulb is screwed in tightly. If using an LED bulb, confirm it is dimmable if connected to a dimmer switch (though this lamp has an On/Off switch on the head). Try a different bulb.

Armurinn heldur ekki stöðu:

Adjust the tension control knobs on the joints. Tighten them slightly until the arm holds its desired position.

8. Tæknilýsing

9. Ábyrgð og stuðningur

For warranty information, product support, or to inquire about replacement parts, please contact Artemide directly through their official website or customer service channels. Specific warranty terms and conditions may vary and are provided by the manufacturer.