ROLLS SX95 Stereo Subwoofer Crossover/Filter User Manual

1. Inngangur

The ROLLS SX95 is a dedicated stereo subwoofer crossover designed to separate low frequencies from line-level audio signals. It allows for precise control over your subwoofer's output, ensuring optimal integration with your existing audio system. This unit features both mono and stereo operation modes, along with a true pass-through output to maintain the integrity of your main audio signal.

2. Helstu eiginleikar

• 12 dB/octave roll-off for precise frequency separation.
• Stereo RCA input and outputs for versatile connectivity.
• Adjustable crossover frequency range from 36Hz to 200Hz.
• Selectable mono or stereo subwoofer output.
• True pass-through output for unaltered main signal.
• Durable 16-gauge steel chassis.
• Compact design, suitable for various installations.

3. Innihald pakka

• ROLLS SX95 Stereo Subwoofer Crossover/Filter Unit
• 12V Auxiliary Power Supply

4. Öryggisleiðbeiningar

• Lestu allar leiðbeiningar áður en þú notar tækið.
• Geymdu þessa handbók til síðari viðmiðunar.
• Ekki láta þessa einingu verða fyrir rigningu eða raka.
• Ekki loka fyrir nein loftræstiop.
• Notaðu aðeins viðhengi/aukahluti sem framleiðandi tilgreinir.
• Taktu þessa einingu úr sambandi í eldingum eða þegar hún er ónotuð í langan tíma.
• Látið alla þjónustu til hæfs þjónustufólks.

5. Stýringar og tengingar

5.1 Framhlið

The front panel provides access to all user-adjustable settings:

• Undirstig: Rotary knob to adjust the output level of the subwoofer signal. Range from 0 to 10.
• STEREO/MONO: Push-button switch to select between stereo (out) and mono (in) operation for the subwoofer output.
• TÍÐI: Rotary knob to set the crossover frequency, ranging from 36Hz to 200Hz. This determines the upper frequency limit for the subwoofer output.
• FASINN (0°/180°): Push-button switches for LEFT and RIGHT channels to invert the phase of the subwoofer output by 180 degrees. This helps in optimizing bass response relative to your main speakers.
• PWR LED: Ljósir grænt þegar kveikt er á tækinu.

5.2 Bakhlið

The rear panel houses all audio input and output connections, along with the power input:

• INPUT (L/R RCA): Stereo RCA inputs for connecting the audio source (e.g., preamplifier, receiver's line output).
• PASS THRU (L/R RCA): Stereo RCA outputs that provide the full-range input signal without any processing. Connect these to your main amphátalara eða hátalara.
• SUB OUTPUT (L/R RCA): Stereo RCA outputs for the low-pass filtered signal. Connect these to your powered subwoofer(s) or a subwoofer amplíflegri.
• POWER: Input jack for connecting the included 12V auxiliary power supply.

6. Uppsetning og uppsetning

Follow these steps to integrate the SX95 into your audio system:

1. Gakktu úr skugga um að slökkt sé á öllum hljóðbúnaði áður en tengingar eru gerðar.
2. Connect the line-level output from your audio source (e.g., preamplifier, receiver) to the INPUT (L/R RCA) jacks on the SX95 rear panel.
3. Tengdu við PASS THRU (L/R RCA) outputs of the SX95 to the inputs of your main amplifier or powered speakers. This will carry the full-range signal to your main audio system.
4. Tengdu við SUB OUTPUT (L/R RCA) jacks of the SX95 to the line-level inputs of your powered subwoofer(s) or subwoofer amplíflegri.
5. Connect the included 12V auxiliary power supply to the KRAFTUR input on the SX95 rear panel, then plug the power supply into an AC outlet. The PWR LED on the front panel should illuminate.
6. Power on your audio source, main amplifier/speakers, and subwoofer(s).

7. Rekstur

Once installed, adjust the controls on the front panel to optimize your subwoofer's performance:

• Undirstig: Start with the SUB LEVEL knob at a low setting (e.g., 3-4). Play some audio and gradually increase the level until the subwoofer blends seamlessly with your main speakers without overpowering them.
• TÍÐI: Adjust the FREQUENCY knob to set the crossover point. This should typically be set based on the frequency response of your main speakers and subwoofer. A common starting point is 80Hz, but experimentation is recommended to find the ideal blend for your specific setup and room acoustics.
• STEREO/MONO: If you are using a single subwoofer, press the STEREO/MONO button in for mono operation. If you are using two subwoofers and wish to maintain stereo separation for the low frequencies, leave the button out for stereo operation.
• FASINN (0°/180°): The phase switches help align the subwoofer's output with your main speakers. Listen to music with strong bass and try both 0° and 180° settings for each channel. Choose the setting that provides the most impactful and coherent bass response. Often, the correct phase will result in a fuller, more defined bass sound.

8. Viðhald

The ROLLS SX95 requires minimal maintenance. To ensure longevity and optimal performance:

• Haltu tækinu hreinu með því að þurrka það af með mjúkum, þurrum klút.
• Forðist að nota sterk efni eða slípiefni.
• Tryggið næga loftræstingu í kringum tækið til að koma í veg fyrir ofhitnun.
• Do not expose the unit to extreme temperatures or humidity.

9. Bilanagreining

10. Tæknilýsing

11. Ábyrgð og stuðningur

ROLLS products are designed for reliability and performance. This product is covered by a limited warranty against defects in materials and workmanship. For specific warranty terms, service, or technical support, please refer to the documentation included with your purchase or visit the official ROLLS websíða.

Vinsamlegast geymdu sönnunina þína fyrir kaupum fyrir ábyrgðarkröfur.