Anderic RRLC16.2

Anderic RRLC16.2 Universal Replacement Remote Control for Sharp Roku TVs

Model: RRLC16.2 | Brand: Anderic

Inngangur

This manual provides comprehensive instructions for the Anderic RRLC16.2 Universal Replacement Remote Control. Designed specifically for Sharp Roku TVs, this remote offers immediate functionality for compatible Sharp models without requiring any initial programming. It features dedicated shortcut keys for popular streaming services and a secure battery compartment for enhanced durability and safety. For other Roku TV brands or Roku Boxes, programming may be required.

Eiginleikar vöru

  • Fully Universal: Compatible with all Roku TVs. Note: Not for Roku Streaming Sticks.
  • Uncompromised Quality: Engineered for superior performance and durability compared to original remotes.
  • Áreynslulaus aðgerð: Works identically to the original remote for Sharp Roku TVs without complex setup. (Some shortcut keys may differ).
  • Quick Access to Streaming Services: Dedicated shortcut keys for NETFLIX, AMAZON, RDIO, and MGO provide instant access to these streaming platforms.
  • Öruggt rafhlöðuhólf: Includes an optional screw to secure the battery cover, preventing accidental opening.

Uppsetning

1. Uppsetning rafhlöður

The Anderic RRLC16.2 remote requires two AAA batteries (not included). To install:

  1. Finndu rafhlöðuhólfið aftan á fjarstýringunni.
  2. Renndu rafhlöðulokinu niður til að opna.
  3. Settu tvær AAA rafhlöður í og ​​gætið þess að pólunin (+ og -) sé rétt.
  4. Replace the battery cover by sliding it upwards until it clicks into place. For added security, use the optional screw to fasten the cover.
Til baka view of Anderic RRLC16.2 remote control showing the battery compartment with an optional screw for securing the cover.

Image: Back of the remote control, highlighting the battery compartment and optional screw.

2. Initial Use (Sharp Roku TVs)

For Sharp Roku TV models (e.g., LC-43LB371U, LC-43LB371UA, LC-43LB371UB, LC-50LB371U), the Anderic RRLC16.2 remote is pre-programmed and ready to use immediately after battery installation. No additional setup is required.

3. Programming for Other Roku TVs or Roku Boxes

If you are using the remote with other Roku TV brands (Hisense, Insignia, TCL, Hitachi) or a Roku Box, programming may be necessary. Refer to the "Programming Instructions (via Learning)" section below for detailed steps.

Notkunarleiðbeiningar

Framan view of Anderic RRLC16.2 remote control showing all buttons including power, directional pad, OK, back, home, volume, mute, and streaming service shortcuts.

Mynd: Framan view of the Anderic RRLC16.2 remote control.

  • Aflhnappur (): Located at the top, press to turn your TV on or off.
  • Directional Pad (Purple Arrows) & OK Button: Use the arrow buttons to navigate menus and select options. Press the central "OK" button to confirm selections.
  • Til baka hnappur (): Fer aftur í fyrri skjá eða valmynd.
  • Heimahnappur (): Fer aftur á heimaskjáinn á Roku.
  • Volume & Mute Buttons: Located on the side of the remote. Use the volume up/down buttons to adjust audio levels and the mute button to silence audio.
  • Spila/gera hlé, spóla til baka, spóla áfram: Standard media control buttons for content playback.
  • Flýtileiðir: Dedicated buttons for NETFLIX, AMAZON, RDIO, and MGO provide instant access to these streaming platforms.

Samhæfni

The Anderic RRLC16.2 remote control is designed for broad compatibility with Roku TVs. Please review the compatibility details below:

  • Pre-Programmed for Sharp Roku TV Models: LC-43LB371U, LC-43LB371UA, LC-43LB371UB, LC-50LB371U.
  • Compatible with Other Roku TV Brands (Requires Programming): Hisense, Insignia, TCL, Hitachi.
  • Compatible with Roku Box (Requires Programming).
  • NOT Compatible with Roku Streaming Sticks.
Compatibility chart for Anderic RR-LC-16.2 remote, showing checkmarks for Sharp Roku TV models and Roku Box (with note for programming), and an X for Roku Stick.

Image: Anderic RR-LC-16.2 Compatibility Chart.

Programming Instructions (via Learning)

This remote can be programmed to work with any TV via the learning method. This method does not require codes. Note: All keys on the RR-LC-16.2 may be learned. Original remote is needed.

  1. Ýttu á og haltu inni (Heima) og (Back) keys simultaneously for about 3 seconds. The indicator light will light up and remain on. Release the keys.
  2. Press and release the key to be learned. The indicator light will flash slowly.
  3. Point the original remote control head-to-head with the RR-LC-16.2, making sure the IR (infrared) light bulb at the top edge of the remote aligns directly with the lens on the front of the RR-LC-16.2, with a distance of about 3cm.
  4. Press and hold the key on the original remote that you want the RR-LC-16.2 to learn. The indicator light will flash 3 times to confirm and then remain on, waiting for the next entry.
  5. Endurtaktu skref 2-4 til að læra aðra takka.
  6. Ýttu á (Home) to save and exit, or the remote will exit automatically after 20 seconds.

Endurstilla í sjálfgefna stöðu verksmiðju

Ýttu á og haltu inni (Heima) og (Back) keys simultaneously for 3 seconds. The indicator will flash 3 times to confirm. Remote has successfully been reset to factory default status.

Eyða öllum lærðum lyklum

Ýttu á og haltu inni (Heima) og (Star) keys simultaneously for 3 seconds. The indicator will flash 3 times to confirm. All learned keys have been successfully deleted.

Detailed diagram of the Anderic RR-LC-16.2 remote control with programming instructions for various Roku TV brands and Roku Streaming Players.

Image: Anderic RR-LC-16.2 Advanced Universal Operating Guide with programming details.

Tæknilýsing

Vörumál 5.75 x 1.75 x 1 tommur
Þyngd hlutar 1.76 aura
Tegundarnúmer vöru RRLC16.2
Rafhlöður 2 AAA rafhlöður nauðsynlegar
Vörumerki Anderic
Sérstakur eiginleiki Alhliða
Litur Svartur
Hámarksfjöldi studdra tækja 2
Samhæf tæki Streaming Device, Television

Úrræðaleit

  • Fjarstýring svarar ekki: Gakktu úr skugga um að rafhlöðurnar séu rétt settar í og ​​ekki tæmdar. Skiptu um þær ef þörf krefur.
  • Sjónlína: The remote operates using infrared (IR) technology. Ensure there is a clear line of sight between the remote and your TV's IR receiver.
  • Röng virkni: If buttons are not performing as expected, verify compatibility with your specific Roku TV model. For non-Sharp Roku TVs or Roku Boxes, ensure the remote has been correctly programmed using the learning method.
  • Flýtileiðir virka ekki: While the remote is universal, some shortcut keys may differ from your original remote. Ensure your streaming apps are installed and updated on your Roku TV.

Ábyrgð og stuðningur

Anderic products are designed for quality and reliability. For any issues or support inquiries, please refer to the manufacturer's official webvefsíðu eða hafðu samband við þjónustuver þeirra. Geymdu kaupkvittunina vegna ábyrgðarkröfu.

Anderic is a registered trademark of Dan's Electronics Etc., Inc. All Rights Reserved. We are not affiliated with Roku. Roku is a registered trademark of Roku Inc.

Fyrir stuðning, heimsækja: www.anderic.com

Tengd skjöl - RRLC16.2

Preview Anderic RRUR01.7 Universal 4-Device Remote Control User Manual & Programming Guide
Comprehensive guide for the Anderic RRUR01.7 universal remote, covering setup, programming codes for various devices (TV, VCR, DVD, Audio, Projector, STB), macro functions, and advanced features. Learn how to program and customize your remote for optimal control of your home entertainment system.
Preview Notkunarhandbók fyrir Anderic RRU401.5 alhliða fjarstýringu
Ítarleg leiðbeiningar um forritun og notkun Anderic RRU401.5 alhliða fjarstýringarinnar, sem fjallar um uppsetningu, eiginleika eins og makró og nám, og ítarlega kóðalista fyrir ýmis tæki.
Preview Anderic RRST01.3 Advanced Universal Remote Control Operating Guide
Comprehensive guide to setting up and using the Anderic RRST01.3 universal remote control. Learn how to program it for Roku TVs, LG, and Vizio devices using codes or the learning function. Includes troubleshooting and optional accessory information.
Preview Anderic RR3720 Projector Universal Remote Control - Setup Guide and Code List
Comprehensive user guide for the Anderic RR3720 universal projector remote control, detailing setup procedures, code input methods, code search functionality, learning capabilities, and a complete list of compatible projector codes.
Preview Leiðbeiningar fyrir Anderic RRU401.7 alhliða fjarstýringu fyrir 4 tæki
Ítarlegar leiðbeiningar um forritun og notkun Anderic RRU401.7 alhliða fjarstýringarinnar fyrir 4 tæki, þar á meðal kóðainnslátt, sjálfvirk leit, læsingu tækja, makróvirkni og baklýsingarstillingar.
Preview Anderic RRUR01 Universal Remote Control Programming Manual
This manual provides detailed instructions for programming and operating the Anderic RRUR01 universal remote control. It covers code input, auto search, one-button search methods, device lock, punch-through features, learning functions, backlight adjustments, and includes a comprehensive code list for various brands and device types.