1. Inngangur
This manual provides essential instructions for the safe and efficient use of your Herdio 4 Inch 200 Watt Outdoor Indoor Bluetooth Speakers, Model HOS-401WBT. Please read this manual thoroughly before installation and operation to ensure optimal performance and longevity of your speakers.
2. Innihald pakka
Gakktu úr skugga um að allir hlutir sem taldir eru upp hér að neðan séu innifaldir í pakkanum þínum:
- 2 x Herdio 4 Inch Speakers (1 Active, 1 Passive)
- 1 x 12V Power Adapter and Supply
- 1 x 16FT/5M Speaker Cable
- 1 x Notendahandbók
- Festingar og skrúfur
3. Tæknilýsing
| Eiginleiki | Smáatriði |
|---|---|
| Nafn líkans | HOS-401WBT |
| Tegund hátalara | Úti/inni |
| Power Output | 200 Watts (100W per speaker) |
| Þvermál woofer | 4 tommur |
| Þvermál tweeter | 1 tommur |
| Tengingar | Bluetooth, Wired (Passive speaker connection) |
| Bluetooth svið | Allt að 20.12 metrar (66 fet) |
| Vatnsþolsstig | IP66 (vatnsheldur) |
| Efni | Akrýlónítríl bútadíen stýren (ABS) |
| Vörumál (L x B x H) | 8.62" x 5.67" x 6.62" (219 mm x 144 mm x 159 mm) |
| Inntak Voltage | 12 volt |
| Hljóðútgangsstilling | Stereo |
4. Uppsetning
4.1 Uppsetning hátalaranna
The Herdio speakers come with versatile swivel brackets for flexible placement. These brackets allow for a 90-120 degree range of motion, enabling you to direct sound as desired.
- Fjarlægja sviga: Unscrew the knobs on the sides of the speakers to detach the mounting brackets.
- Staðsetning merkis: Choose your desired location (e.g., patio, garage, living room wall). Use the detached bracket to mark the drill points for the screws.
- Settu upp sviga: Securely attach the brackets to the wall or ceiling using appropriate screws (provided).
- Tengdu hátalara: Slide the speakers onto the installed brackets. Adjust the speaker angle and tighten the knobs to secure them in place.
4.2 Tenging hátalaranna
The Herdio speaker system consists of one active speaker and one passive speaker. The active speaker contains the amplifier and Bluetooth module, while the passive speaker connects to the active one via the provided speaker cable.
- Connect Passive to Active: Locate the red (+) and black (-) terminals on the back of both speakers. Connect the red wire of the speaker cable to the red terminal on both speakers, and the black wire to the black terminal on both speakers. Ensure a secure connection by turning the terminal clockwise to tighten.
- Rafmagnstenging: Plug the 12V power adapter into the DC 12V input port on the active speaker. Then, plug the power adapter into a suitable electrical outlet.
5. Rekstur
5.1 Bluetooth pörun
Once powered on, the active speaker will automatically enter Bluetooth pairing mode. The Bluetooth indicator light will flash, indicating it's ready to connect.
- Virkjaðu Bluetooth: Virkjaðu Bluetooth í snjallsímanum eða spjaldtölvunni.
- Leitaðu að Tæki: Look for "HOS-401WBT" in the list of available Bluetooth devices.
- Tengjast: Select "HOS-401WBT" to pair. A confirmation tone will sound from the speakers once successfully connected.
5.2 Hljóðspilun
After successful pairing, you can play audio from your connected device. The speakers will output stereo sound.
- Hljóðstyrkur: Adjust the volume directly from your connected device.
- Hljóðgæði: The speakers are designed to deliver full-range sound with deep bass and clear highs.
6. Viðhald
- Þrif: Notið mjúkan, þurran klút til að þrífa yfirborð hátalarans. Forðist slípiefni eða leysiefni.
- Veðurvernd: Although IP66 rated, it is recommended to protect the power adapter from direct exposure to rain or extreme weather conditions.
- Geymsla: Ef hátalararnir eru geymdir í langan tíma skal aftengja þá frá rafmagni og geyma þá á köldum, þurrum stað.
7. Bilanagreining
| Vandamál | Möguleg orsök | Lausn |
|---|---|---|
| Enginn kraftur | Rafmagnsbreytir ekki tengdur eða bilaður innstunga. | Ensure the power adapter is securely plugged into the active speaker and a working electrical outlet. |
| Ekkert hljóð | Speakers not paired, volume too low, or incorrect wiring. | Verify Bluetooth connection, increase device volume, and check speaker cable connections between active and passive speakers. |
| Aftenging Bluetooth | Device out of range or interference. | Ensure the paired device is within 20 meters (66 feet) of the active speaker. Minimize obstacles and interference. |
| Bjagað hljóð | Volume too high or poor audio source. | Reduce the volume on your device. Try a different audio source or file. |
8. Ábyrgð og stuðningur
All Herdio speaker products come with a 1 ára takmörkuð ábyrgð against defects in materials and workmanship. Proof of purchase is required for all claims.
During the warranty period, Herdio will replace any defective part and correct any defect in workmanship without charge for either parts or labor.
The Technical Support Center at HERDIO is available from Monday to Friday, excluding holidays.
Fyrir spurningar eða aðstoð, vinsamlegast hafið samband við okkur á: support@herdiotech.com
