KING KB ECO2S Garage Heater 15000W/240V Instruction Manual

1. Inngangur

The KING KB ECO2S Garage Heater is designed to provide efficient and controlled heating for garages and similar large spaces. This unit features an integrated ECO2S electronic thermostat with remote control, offering energy-efficient 2-stage heating and an Eco mode that automatically adjusts wattage. It also includes fan-only and timer modes, along with an auto-memory feature to retain settings after power interruptions. Constructed with spiral steel elements and a high CFM fan, it ensures even air distribution and prolonged heater life. A universal wall/ceiling bracket is included for flexible installation.

Mynd: Framan view of the KING KB ECO2S Garage Heater, highlighting the control panel and heating elements.

2. Mikilvægar öryggisupplýsingar

VIÐVÖRUN: Lesið allar leiðbeiningar áður en þessi hitari er settur upp eða notaður. Ef þessum leiðbeiningum er ekki fylgt getur það valdið raflosti, eldsvoða, eignatjóni eða líkamstjóni.

• Always disconnect power before servicing or cleaning the heater.
• Þessi hitari er heitur þegar hann er í notkun. Til að forðast brunasár, ekki láta bera húð snerta heita fleti.
• Haltu eldfimum efnum, eins og húsgögnum, púðum, rúmfötum, pappírum, fötum og gardínum að minnsta kosti 3 m frá framhlið hitarans og haltu þeim frá hliðum og aftan.
• Ekki nota utandyra.
• Þessi hitari er ekki ætlaður til notkunar á baðherbergjum, þvottahúsum og svipuðum stöðum innanhúss.
• Ekki renna snúru undir teppi. Ekki hylja snúruna með teppum, hlaupum eða álíka áklæði. Settu snúruna í burtu frá umferðarsvæðinu og þar sem henni verður ekki hrasað.
• Stingdu hitara alltaf beint í innstungu/innstungu. Notið aldrei með framlengingarsnúru eða færanlegum rafmagnskrana (innstunga/raflok).
• This heater is for 240V applications only. Ensure proper wiring and circuit breaker capacity.
• Uppsetning skal framkvæmd af löggiltum rafvirkja í samræmi við allar staðbundnar og landsbundnar rafmagnsreglur.

3. Innihald pakka

The KING KB ECO2S Garage Heater package includes the following items:

• KING KB ECO2S bílskúrshitunareining
• Alhliða vegg-/loftfesting
• Handfesta fjarstýring
• Remote Control Wall Holder
• Installation Hardware (lag bolts, nuts, etc.)
• Heavy-duty pigtail (for electrical connection)

Image: KING KB ECO2S Garage Heater shown with its included mounting bracket and remote control.

4. Uppsetning og uppsetning

4.1 Uppsetning hitara

The universal bracket allows for wall or ceiling mounting. Ensure the mounting surface can support the heater's weight (approximately 48 pounds) and is structurally sound. Use the provided lag bolts to secure the bracket to framing members.

• Attach the bracket to the heater using the large knobs on the sides.
• Adjust the heater's angle using the smaller knobs on the bracket. The heater can be tilted to four different positions to direct heat as needed.

Image: Diagram illustrating recommended garage coverage based on heater wattage. The 15000W model heats up to 1,500 sq ft.

4.2 Rafmagnstenging

WARNING: Electrical installation must be performed by a licensed electrician in accordance with all local and national electrical codes.

• Ensure power is disconnected at the circuit breaker before beginning any wiring.
• Remove the access panel on the heater by loosening the Phillips screw.
• Remove the knockout on the side of the heater where the wiring will enter.
• Install the provided grommet with integral strain relief into the knockout hole.
• Connect the heavy-duty pigtail wires to the terminal block inside the heater:
  • Black wire to L1 lug.
  • Red wire to L2 lug.
  • Green wire to the grounding screw.
• Ensure all wires are securely tightened and that no insulation is under the terminals.
• Tighten the strain relief nut to secure the pigtail and prevent damage to the wiring.
• Close the access panel and secure it with the Phillips screw.
• This 15000W, 240V unit requires a minimum of 8 AWG copper wire and a 40 Amp aflrofi.

Mynd: Aftan view of the heater with the wiring access panel open, showing the terminal block for electrical connections.

4.3 Stilling hitastills

On the back of the heater, there is a toggle switch to select between the built-in thermostat and an external thermostat.

• Set the switch to "I" for the built-in thermostat (recommended for most users).
• Set the switch to "II" if you are using an external thermostat wired by an electrician.
• Incorrect setting of this switch will prevent normal operation.

4.4 Tilvísun í uppsetningarmyndband

The following video demonstrates the wiring and mounting process for a similar garage heater. While the model shown is 6000W, the general installation principles apply to the KING KB ECO2S heater.

5. Notkunarleiðbeiningar

The heater features an intuitive control panel and a remote control for convenient operation.

5.1 Stjórnborð

Upon plugging in the unit, it will beep, indicating power and correct voltage. The control panel features a digital display and several buttons:

• Aflhnappur: Kveikir/SLÖKKUR á tækinu.
• Hnappur fyrir ham: Cycles through different heating modes:
  • Lágt: Operates at a lower wattage.
  • Eco Mode: Automatically uses the lowest wattage needed to heat the room, optimizing energy efficiency.
  • Aðeins aðdáandi: Hringrásar lofti án þess að hita.
  • Hár: Operates at maximum wattage for rapid heating.
• Upp/niður hnappar: Stilltu æskilegt hitastig.
• Tímamælirhnappur: Sets a timer for the heater to run for a predetermined length of time, after which it will automatically shut off.

Mynd: Framan view of the heater, showing the adjustable louvers for directing airflow.

5.2 Fjarstýring

The compact remote control provides full functionality from a distance, allowing you to adjust settings without directly accessing the unit.

• Aflhnappur: Kveikir/SLÖKKUR á tækinu.
• Hnappur fyrir ham: Cycles through heating modes (Low, Eco, Fan Only, High).
• Hitastig upp/niður: Stillir æskilegt hitastig.
• Tímamælirhnappur: Stillir rekstrartíma.

The remote control is a convenient feature, especially when the heater is mounted high or in a hard-to-reach location.

6. Viðhald

WARNING: Always disconnect power at the main service panel before attempting any maintenance or cleaning.

• Þrif: Hreinsið reglulega ytra byrði hitarans með mjúkum, þurrum klút.amp klút. Ekki nota slípiefni eða leysiefni.
• Rykhreinsun: Use a vacuum cleaner with a brush attachment to remove dust from the grilles and heating elements. Ensure the heater is completely cool before cleaning.
• Skoðun: Regularly inspect the power cord and plug for any signs of damage. If damaged, do not use the heater and contact a qualified electrician for repair.
• Smurning: The unit features a permanently lubricated motor and does not require additional lubrication.

7. Bilanagreining

8. Tæknilýsing

9. Ábyrgð og stuðningur

For warranty information, please refer to the documentation included with your product or visit the official KING website. For technical support, troubleshooting assistance, or to inquire about replacement parts, please contact KING customer service.

Tengiliðaupplýsingar er yfirleitt að finna á framleiðandasíðunni websíðuna eða í vöruumbúðunum.