Baseus 10W Automatic Clamping Wireless Car Charger Mount User Manual

Inngangur

Thank you for choosing the Baseus 10W Automatic Clamping Wireless Car Charger Mount. This device is designed to provide convenient and fast wireless charging for your Qi-enabled smartphone while securely holding it in your vehicle. Please read this manual carefully before use to ensure proper operation and to maximize the product's lifespan.

Öryggisupplýsingar

• Ekki taka í sundur eða breyta vörunni.
• Haldið frá vatni, eldi og miklum hita.
• Forðist harða högg eða að tækið sleppi.
• Gakktu úr skugga um rétta loftræstingu í kringum hleðslutækið meðan á notkun stendur.
• Use only with compatible power sources (QC 3.0 car charger recommended for fast charging).

Innihald pakka

• Baseus Wireless Car Charger Mount
• Air Vent Clip (1x)
• Micro USB Cable (4.9ft)
• Notendahandbók

Vara lokiðview

The Baseus Wireless Car Charger Mount features an automatic clamping mechanism, Qi wireless charging, and an air vent mounting system. It is designed for easy one-hand operation.

Lykilhlutir:

• Hleðslupúði: The surface where the phone rests for wireless charging.
• Sjálfvirk ClampVopn: Securely hold the phone in place.
• Infrared Induction Sensor: Detects the phone for automatic clamping.
• One-Tap Release Button: Located on the side, releases the clamping vopn.
• Air Vent Clip: Attaches the mount to your car's air vent.
• Micro USB tengi: Fyrir orkuinntak.

Uppsetningarleiðbeiningar

1. Attaching the Air Vent Clip

1. Unscrew the nut on the back of the charger mount.
2. Insert the ball joint of the air vent clip into the nut, then into the socket on the back of the charger.
3. Tighten the nut to secure the clip to the charger.

2. Mounting to the Car Air Vent

1. Choose a suitable air vent in your vehicle. The clip is designed for various vent types, as shown in the image below.
2. Gently push the air vent clip onto one of the vent blades until it is securely attached.
3. Adjust the angle of the charger mount for optimal viewing.

This image illustrates the different types of car air vents that are compatible with the charger mount's clip. Ensure your car's vent matches one of the compatible designs for secure installation.

3. Tengja máttur

1. Connect the Micro USB cable to the charging port on the bottom of the charger mount.
2. Plug the other end of the USB cable into a car charger (not included). For 10W fast charging, a QC 3.0 car charger is required. Standard 5V/2A car chargers will provide 5W charging.
3. The indicator light on the charger will illuminate, indicating it is powered on and ready for use.

Notkunarleiðbeiningar

1. Placing Your Phone

1. Hold your Qi-enabled smartphone near the charging pad. The infrared induction sensor will detect your phone.
2. The automatic clamping arms will open. Place your phone onto the charging pad.
3. Klamping arms will automatically close, securing your phone and initiating wireless charging.

This image illustrates how the infrared sensor detects a phone, causing the arms to automatically open and then clamp shut once the phone is placed, initiating charging.

2. Að fjarlægja símann þinn

1. To release your phone, gently touch the sensor button located on the right side of the charger mount.
2. Klamping arms will automatically open, allowing you to remove your phone.

3. Wireless Charging Functionality

The charger supports Qi-enabled phones between 4.0 and 6.5 inches. Charging speeds vary:

• 10W hraðhleðsla: For compatible Samsung phones (e.g., Galaxy S10/S9/Note 9). Requires a QC 3.0 car charger.
• 7.5W hraðhleðsla: For compatible iPhones (e.g., iPhone Xs/XR/X/8). Requires a QC 3.0 car charger.
• 5W Standard Charging: For other Qi-enabled devices. Requires a 5V/2A car charger.

Mikilvæg athugasemd:

• The thickness of your phone case should not exceed 4mm for optimal charging.
• Metal cases or foreign objects between the phone and charger will interfere with wireless charging.

This image provides a visual guide to the wireless charging capabilities, showing 10W, 7.5W, and 5W charging for various phone models and the requirement for a QC 3.0 car charger for fast charging.

4. Sýningarmyndband af vöru

Watch this video for a visual demonstration of the Baseus Wireless Car Charger Mount's features and operation.

Viðhald

• Hreinsið yfirborð hleðslutækisins með mjúkum, þurrum klút. Notið ekki slípiefni eða leysiefni.
• Ensure the air vent clip is free from dust and debris to maintain a secure grip.
• Regularly check the Micro USB cable for any signs of wear or damage.

Úrræðaleit

Tæknilýsing

• Vörumerki: Baseus
• Gerð tengis: USB, þráðlaust
• Samhæf tæki: Qi-enabled Smartphones (4.0"-6.5")
• Samhæfar símagerðir: iPhone Xs, Xs Max, XR, X, 8, 8 Plus; Samsung Galaxy S10, S10 Plus, S10e, S9, S9 Plus, S8, S8 Plus, S7, S7 edge, S6 edge plus, Note 9, Note 5 series devices.
• Sérstakur eiginleiki: Hraðhleðsla
• Litur: Svartur
• Inntak Voltage: 9 volt
• Ampaldur: 1.67 Amps
• Samtals USB tengi: 1
• Þyngd hlutar: 10.2 aura
• Stærðir pakka: 8.15 x 4.45 x 2.91 tommur

Ábyrgð og stuðningur

This Baseus Wireless Car Charger Mount comes with an 18 mánaða ábyrgð from the date of purchase. Baseus also provides æviþjónustu við viðskiptavini fyrir þessa vöru.

For warranty claims, technical support, or any inquiries, please refer to the contact information provided with your purchase or visit the official Baseus websíða.