1. Vöru lokiðview
The Flex LBE 17-11 125 is a powerful and high-quality angle grinder designed for cutting, deburring, and grinding tasks. It incorporates advanced features for enhanced performance, safety, and durability.
- Microprocessor Electronics: Features soft start, restart interlock after power failure, overload protection, and constant electronics (CDC) for consistent performance.
- Mechanical Brake: Ensures the tool stops quickly, within 3.5 seconds, for increased safety.
- Anti-Kickback Function: Automatically switches off the motor if the disc jams, preventing dangerous kickback.
- Mótor með mikilli afkastagetu: Designed for high load capacity and efficiency, delivering strong power output.
- Optimized Durability: Efficient air ducting and optimized carbon geometry contribute to a long service life.
- Dust Sealing: Sophisticated dust sealing protects the motor and gearbox from abrasive dust.
- Vistvæn hönnun: Compact and ergonomic form for comfortable handling.
- Stilling á hlíf án verkfæra: The protective guard can be adjusted without the need for additional tools.
- SoftVib Handle: Features an integrated patented clamping nut wrench and vibration damping for reduced fatigue.
2. Öryggisleiðbeiningar
Always observe general power tool safety warnings and specific instructions for angle grinders. Failure to follow these warnings and instructions may result in electric shock, fire, and/or serious injury.
Almennt öryggi
- Notið alltaf viðeigandi persónuhlífar (PPE), þar á meðal öryggisgleraugu, heyrnarhlífar, hanska og rykgrímu.
- Gakktu úr skugga um að vinnustykkið sé tryggilega klampfyrir aðgerð.
- Keep hands clear of rotating parts and the cutting/grinding area.
- Ekki nota tækið í sprengifimu lofti, svo sem í návist eldfimra vökva, lofttegunda eða ryks.
- Haldið börnum og nærstadda frá meðan rafmagnsverkfæri eru í notkun.
Rafmagnsöryggi
- Gakktu úr skugga um að aflgjafinn voltage passar við einkunnina á nafnplötu verkfærisins.
- Ekki misnota snúruna. Aldrei nota snúruna til að bera, toga eða taka rafmagnsverkfærið úr sambandi. Haltu snúrunni í burtu frá hita, olíu, beittum brúnum eða hreyfanlegum hlutum.
- Ef notað er rafmagnsverkfæri í auglýsinguamp staðsetning er óhjákvæmileg, notaðu afgangsstraumsbúnað (RCD) varið framboð.
Specific Angle Grinder Safety
- Always use the protective guard. Ensure it is correctly positioned and securely fastened.
- Use only discs that are rated for the maximum speed of the grinder and are suitable for the material being worked on.
- Never use cutting discs for side grinding.
- Be aware of the anti-kickback feature; if the disc jams, the motor will shut off. Release the switch and clear the obstruction before restarting.
- Allow the disc to come to a complete stop using the mechanical brake before setting the tool down.
3. Íhlutir og eiginleikar
Lykilhlutir:
- Aðalmál: Houses the motor, electronics, and gearbox.
- Verndarvörður: Adjustable, tool-free guard for user protection.
- SoftVib Handle: Ergonomic side handle with vibration damping and integrated wrench.
- Snældaláshnappur: For easy disc changes.
- Rennirofi: Lockable for continuous operation.
- Speed Selection Dial: For variable speed control (see Figure 2).
- Loftop: For motor cooling and dust expulsion.
4. Uppsetning
Attaching the SoftVib Handle
The SoftVib handle can be screwed into either the left or right side of the gearbox housing, depending on user preference and application. Ensure it is tightened securely.
Uppsetning hlífðarhlífarinnar
The protective guard is tool-free adjustable. Position it to provide maximum protection for your specific task. Ensure it clicks securely into place.
Installing the Grinding/Cutting Disc
- Unplug the tool from the power supply.
- Ýttu á og haltu snældaláshnappinum inni.
- Setjið innri klútinnampflans á snælduna.
- Place the desired 125mm disc onto the inner flange, ensuring it sits flush.
- Skrúfaðu á clamping nut (M14) and tighten it firmly using the integrated wrench in the SoftVib handle.
- Slepptu snúningsláshnappinum.
5. Notkunarleiðbeiningar
Kveikt/slökkt
- To switch on, push the slide switch forward. For continuous operation, push it further forward until it locks into place.
- To switch off, release the slide switch. If locked, press the rear part of the switch to release it.
Breytileg hraðastýring
The speed selection dial (Figure 2) allows you to adjust the no-load speed between 2800 and 11500 rpm. Select the appropriate speed for the material and application. Lower speeds are generally used for polishing or working with sensitive materials, while higher speeds are for cutting and grinding.
Using the Mechanical Brake
The integrated mechanical brake stops the disc within 3.5 seconds after the tool is switched off. This enhances safety by quickly stopping rotation.
Working with the Grinder
- Haldið alltaf kvörninni fast með báðum höndum.
- Allow the tool to reach full operating speed before contacting the workpiece.
- Apply steady, even pressure. Do not force the tool, as this can lead to overheating or disc damage.
- For cutting, use a slight rocking motion to prevent the disc from binding.
- Be mindful of sparks and debris. Direct them away from yourself and others.
6. Viðhald
Regular maintenance ensures the longevity and safe operation of your Flex angle grinder.
Þrif
- Taktu alltaf tækið úr sambandi áður en þú þrífur.
- Regularly clean the ventilation slots to prevent dust buildup, which can lead to overheating. Use compressed air if available.
- Þurrkaðu ytra byrði verkfærisins með auglýsinguamp klút. Ekki nota sterk efni eða slípiefni.
Kolefnisburstar
The optimized carbon geometry contributes to long brush life. If the tool's performance significantly drops or sparks excessively, the carbon brushes may need inspection or replacement. This should ideally be done by a qualified service technician.
Geymsla
Store the angle grinder in a dry, secure place, out of reach of children and unauthorized users.
7. Bilanagreining
| Vandamál | Möguleg orsök | Lausn |
|---|---|---|
| Tólið fer ekki í gang | Engin aflgjafi Restart interlock activated (after power failure) Skemmdur rafmagnssnúra | Athugaðu rafmagnstengingu Unplug and re-plug the tool Inspect cord for damage; replace if necessary (by qualified personnel) |
| Verkfærið stöðvast við notkun | Yfirálagsvörn virkjuð Disc jammed (anti-kickback activated) | Reduce pressure; allow tool to cool Release switch, clear obstruction, then restart |
| Of mikill titringur | Worn or damaged disc Órétt festur diskur Laust handfang | Skiptu um disk Re-mount disc correctly, ensure clamping nut is tight Tighten SoftVib handle |
| Reduced performance / Excessive sparking | Slitnir kolefnisburstar Dust buildup in vents | Have brushes inspected/replaced by service center Hreinsið loftopin vandlega |
8. Tæknilýsing
| Einkennandi | Gildi |
|---|---|
| Gerðarnúmer | 447668 |
| Power Input | 1700 W |
| Power Output | 1050 W |
| Voltage | 230 V |
| Tíðni | 50/60 Hz |
| Hámark Þvermál disks | 125 mm |
| Hraði án hleðslu | 2800-11500 snúninga á mínútu |
| Tool Holder (Angle Grinder) | M14 |
| Lengd snúru | 4 m |
| Mál (L x B x H) | 340 x 77 x 105 mm |
| Þyngd | 2.6 kg |
| Litur | Red, Black, Silver |
| Efni | Málmur |
9. Ábyrgð og stuðningur
Specific warranty details for this product may vary by region and retailer. Please refer to the warranty card included with your purchase or contact your point of sale for precise information.
Regarding spare parts availability, information is currently unavailable. For technical support, service, or inquiries about replacement parts, please contact Flex customer service or an authorized Flex service center in your region. Contact details can typically be found on the official Flex websíðunni eða á umbúðum vörunnar.
