Bushnell 119938m Low Glow Trail Camera User Manual

Inngangur

This manual provides detailed instructions for the setup, operation, maintenance, and troubleshooting of your Bushnell 119938m Low Glow Trail Camera. This camera is designed for reliable outdoor surveillance, capturing high-quality images and videos of wildlife or property. It features 24-megapixel resolution, low-glow infrared LEDs for discreet night vision, and adjustable trigger intervals to suit various monitoring needs.

Mynd: Framan view of the Bushnell 119938m Low Glow Trail Camera, showing the lens, PIR sensor, and infrared LEDs.

Uppsetning

1. Uppsetning rafhlöðu

1. Finndu rafhlöðuhólfið á myndavélinni.
2. Open the compartment. Note that the battery housing may be delicate; exercise caution during opening and closing.
3. Insert 6 AA batteries, ensuring correct polarity (+/-) as indicated inside the compartment. Batteries are not included with the camera.
4. Lokaðu rafhlöðuhólfinu örugglega.

2. Uppsetning SD-korts

1. Locate the SD card slot, typically found near the battery compartment or on the side of the camera.
2. Settu samhæft SD-kort (allt að 32 GB, fylgir ekki með) í raufina þar til það smellpassar. Gakktu úr skugga um að kortið sé sett í rétta átt.

3. Uppsetning myndavélarinnar

1. Identify a suitable location for camera placement, considering the desired monitoring area and potential obstructions.
2. Use the provided mounting strap to secure the camera to a tree or post. Thread the strap through the camera's mounting points and tighten it firmly.
3. Adjust the camera's angle to ensure optimal coverage of the target area.

Notkunarleiðbeiningar

1. Kveikja / slökkva á

• Til að kveikja á myndavélinni skaltu renna aflrofanum í stöðuna „ON“.
• Til að slökkva á tækinu, rennið rofanum í stöðuna „SLÖKKT“.

2. Valmyndaleiðsögn og stillingar

The camera features an easy-to-navigate menu system. Use the directional buttons (Up, Down, Left, Right) and the 'OK' button to browse and select options on the display.

• Stillingarval: Choose between 'Photo' for still images, 'Video' for video clips, or 'Hybrid' for both.
• Ljósmyndastillingar: Adjust image resolution (default 24MP), photo burst (1-3 images per trigger).
• Vídeóstilling: Set video length (5-60 seconds) and resolution (1080p).
• Kveikjartímabil: Configure the delay between triggers, ranging from one second to 60 minutes.
• Næmi: Adjust the PIR sensor sensitivity to prevent false triggers or missed events.
• Tími og dagsetning: Set the current time and date for accurate timestampupptöku á fjölmiðlum.
• Sjálfvirkur dag-/næturskynjari: The camera automatically adjusts for optimal image capture in varying light conditions.

3. Retrieving Media

• Til view captured images and videos, power off the camera and remove the SD card.
• Insert the SD card into a computer or compatible device to access the files.

Viðhald

1. Þrif

• Gently wipe the camera lens and PIR sensor window with a soft, lint-free cloth to remove dirt or smudges.
• Clean the camera casing með auglýsinguamp klút eftir þörfum. Forðist að nota sterk efni eða slípiefni.

2. Rafhlöðustjórnun

• Athugaðu reglulega rafhlöðustöðu, sérstaklega fyrir langvarandi notkun.
• Replace all batteries simultaneously with fresh, high-quality AA batteries to ensure consistent performance.
• Remove batteries if the camera will be stored for a prolonged period to prevent leakage.

3. Geymsla

• Geymið myndavélina á köldum, þurrum stað fjarri beinu sólarljósi og miklum hita.
• Ensure the camera is clean and dry before storage.

Úrræðaleit

Myndavélin kviknar ekki á:

Ensure batteries are correctly installed with proper polarity and are fully charged. Check that the power switch is in the 'ON' position.

Léleg mynd- eða myndgæði:

Clean the camera lens and ensure it is free from dirt or condensation. Verify that the camera settings (resolution, mode) are appropriate for the lighting conditions. Ensure the camera is within optimal range (up to 5 meters).

False triggers or excessive recordings:

Adjust the PIR sensor sensitivity to a lower setting. Reposition the camera to avoid areas with moving branches, tall grass, or direct sunlight that can cause false detections.

No images or videos captured:

Check if the SD card is properly inserted and has sufficient free space. Ensure the camera is in the correct operating mode (Photo or Video). Verify that the trigger interval is not set too long.

Sound issues in videos:

Some users have reported sound issues. Ensure the microphone port is clear of obstructions. If issues persist, contact customer support.

Battery housing is fragile:

Exercise extreme care when opening and closing the battery compartment to prevent damage to the plastic housing.

Tæknilýsing

Upplýsingar um ábyrgð

Bushnell products are manufactured to high standards and are backed by a manufacturer's warranty. For specific details regarding the warranty period and coverage for your Bushnell 119938m Low Glow Trail Camera, please refer to the warranty card included with your product or visit the official Bushnell websíða.

Þjónustudeild

If you encounter any issues not covered in this manual or require further assistance, please contact Bushnell customer support. Contact information, including phone numbers and email addresses, can typically be found on the official Bushnell websíðuna eða í vöruumbúðunum.