POWE-Tech AC Power Adapter Instruction Manual

Inngangur

This manual provides essential information for the safe and effective use of your POWE-Tech AC Power Adapter. Please read these instructions carefully before use and retain them for future reference. This adapter is designed to provide reliable power to compatible Brother P-Touch label makers.

Uppsetningarleiðbeiningar

1. Staðfestu eindrægni: Ensure your Brother P-Touch model (PT-1170, PT-1180, PT-1190, PT-1230, PT-1230PC) is listed as compatible with this adapter.
2. Tengjast tæki: Insert the barrel connector end of the AC adapter firmly into the power input port of your Brother P-Touch label maker.
3. Tengdu við rafmagnsinnstungu: Plug the 2-pin main power connector into a standard 100V - 240V AC wall outlet.
4. Rafmagnsvísir: Observe the LED indicator on the adapter. A lit LED indicates that the adapter is receiving power and is ready for use.

Rekstrarupplýsingar

• Sjálfvirk hleðsla: The intelligent switching circuit within the adapter is designed to recognize a fully charged battery (if applicable to your device) and automatically switch to a save mode to prevent overcharging.
• LED vísir: The integrated LED light provides a visual confirmation that the adapter is powered and functioning.
• Öryggiseiginleikar: This adapter includes short circuit protection to safeguard your device and the power supply from electrical damage. The plug is designed to prevent overheating during normal operation.

Viðhald og umhirða

• Þrif: Disconnect the adapter from the power outlet and your device before cleaning. Use a dry, soft cloth to wipe the surface. Do not use liquid cleaners or solvents.
• Geymsla: Store the adapter in a cool, dry place away from direct sunlight and extreme temperatures. Avoid wrapping the cord too tightly around the adapter to prevent damage.
• Meðhöndlun: Do not drop, disassemble, or attempt to repair the adapter yourself. Avoid exposing the adapter to water or high humidity.

Úrræðaleit

• Engin rafmagn í tækið:
  • Ensure the adapter is securely plugged into both the wall outlet and your Brother P-Touch device.
  • Athugaðu hvort innstungan virki með því að stinga í samband annað tæki.
  • Verify that the LED indicator on the adapter is lit. If not, try a different outlet.
• Ofhitnun millistykkis: While the adapter is designed not to overheat, if you notice excessive heat, disconnect it immediately from the power source and your device. Ensure it is used in a well-ventilated area.
• Tækið hleðst ekki/kveikir ekki á sér: Confirm that your device model is explicitly listed as compatible. If issues persist, the device itself may require service.

Tæknilýsing

Ábyrgð og stuðningur

For warranty information or technical support, please refer to the documentation provided with your purchase or contact the seller directly. Specific warranty terms may vary.