Notendahandbók fyrir VISION Talking Analog og Digital úrið

Inngangur

Thank you for choosing the VISION Talking Analog and Digital Watch. This watch is designed to provide clear time announcements in Spanish, making it ideal for individuals with visual impairments, children, and the elderly. It features both an analog display for traditional time-telling and a digital display for precise readings, along with an alarm function.

Mynd 1: Framan view of the VISION Talking Analog and Digital Watch.

Uppsetning

1. Upptaka og frumskoðun

Carefully remove the watch from its packaging. Inspect the watch for any visible damage. The watch comes with a battery pre-installed and is ready for initial setup.

Figure 2: The watch as it appears in its original clear plastic case.

2. Initial Time Setting (Digital)

The digital time needs to be set first. Refer to the 'Operating Instructions' section for detailed steps on setting the digital time using the 'MODE', 'HOUR', and 'MINUTE' buttons.

3. Upphafleg tímastilling (hliðræn)

The analog hands are set independently using the crown (small knob) on the side of the watch. Pull out the crown and rotate it to adjust the analog hands to match the digital time. Push the crown back in to secure the setting.

Notkunarleiðbeiningar

Hnappar aðgerðir

• MODE hnappur: Used to cycle through different modes (Time, Alarm Setting).
• TALKING Button: Press to hear the current time announced in Spanish.
• KLUKKUSTUNDA hnappur: Used to adjust the hour in setting modes.
• MINUTE Button: Used to adjust the minute in setting modes.
• Króna: Used to set the analog hands.

Að segja tíma

• Röddtilkynning: Ýttu á TALA button to hear the current time spoken aloud in Spanish.
• Stafrænn skjár: The digital display shows the time in a 12-hour format (AM/PM).
• Analog skjár: The traditional hands indicate the hour and minute.

Stilla stafrænan tíma

1. Ýttu á MODE hnappinn endurtekið þar til stafræni skjárinn sýnir tímastillingarham (oft gefið til kynna með blikkandi tölustöfum).
2. Notaðu Klukkutími button to adjust the hour. Pay attention to AM/PM indicators.
3. Notaðu MÍNÚTA hnappinn til að stilla mínútur.
4. Ýttu á MODE hnappinn aftur til að staðfesta og hætta í tímastillingu.

Stilla vekjaraklukkuna

1. Ýttu á MODE button until the alarm setting mode is displayed (often indicated by an alarm icon or 'AL').
2. Notaðu Klukkutími hnappinn til að stilla vekjaraklukkutíma sem óskað er eftir.
3. Notaðu MÍNÚTA hnappinn til að stilla óskaðar vekjaraklukkumínútur.
4. Ýttu á MODE button to activate the alarm and exit the setting mode.
5. To turn off a sounding alarm, press any button.

Viðhald

Þrif

Til að þrífa úrið skaltu þurrka það varlega með mjúkum, þurrum klút. Fyrir þrjósk óhreinindi skaltu þurrka það varlega með örlítið þurrum klút.amp Hægt er að nota klút, en gætið þess að raki komist ekki inn í úrið. Forðist að nota sterk efni eða slípiefni.

Skipt um rafhlöðu

The watch uses a Lithium-metal battery. When the voice announcement becomes faint or the digital display dims, it's time to replace the battery. It is recommended to have battery replacement performed by a qualified watch technician to ensure proper sealing and function.

Vatnsþol

This watch is marked as "WATER RESISTANT." This typically means it can withstand splashes, rain, or brief immersion in water, such as washing hands. It is ekki suitable for swimming, showering, or diving. Prolonged exposure to water or submersion may cause damage.

Úrræðaleit

• No Voice Announcement:
  • Check battery level. Replace if low.
  • Ensure the TALKING button is pressed firmly.
• Stafrænn skjár er auður eða dimmur:
  • Battery may be depleted. Replace the battery.
• Tíminn er ónákvæmur:
  • Re-set the digital time following the instructions in the 'Operating Instructions' section.
  • Ensure the analog hands are synchronized with the digital time by adjusting the crown.
  • Low battery can affect timekeeping accuracy. Consider battery replacement.
• Viðvörun hringir ekki:
  • Ensure the alarm is set correctly and activated.
  • Athugaðu stöðu rafhlöðunnar.

Tæknilýsing

Figure 3: Watch face diameter measurement (40 mm).

Figure 4: Watch case thickness measurement (16 mm).

Figure 5: Watch strap width measurement (18 mm).

Mynd 6: Dæmiamples of wrist circumference fit (20 cm and 12 cm).

Ábyrgð og stuðningur

For warranty information or technical support, please refer to the documentation included with your purchase or contact the seller/manufacturer directly. Keep your proof of purchase for any warranty claims.