Notendahandbók fyrir lóðrétta styrkingarjárnsstuðningsbúnað STEELMATE 1

Inngangur

The STEELMATE 1 Vertical Rebar Stabilizer is designed to ensure accurate and stabilized placement of vertical rebar, particularly when transitioning from a concrete foundation to a vertical wall. This product is engineered for durability and reusability, offering a time and cost-effective solution for construction projects.

Helstu eiginleikar eru:

Ideal for accurate placement of vertical rebar for foundation to wall construction.
Durable and reusable design.
Contributes to significant time and money savings.
Provides the fastest method for accurately tying vertical rebar.

Framan view of the STEELMATE 1 bucket containing 40 pieces of rebar stabilizers. — Figure 1: The STEELMATE 1 Bucket of 40 Pcs. This bucket contains 40 individual STEELMATE units, designed for easy storage and transport.

Vara lokiðview

Each STEELMATE unit is a robust, safety orange-colored component made of steel, designed to securely hold rebar in place. The unique design allows for use with various rebar sizes and is suitable for different construction methods.

Nærmynd view of a single STEELMATE rebar stabilizer unit, showing its rectangular shape and rebar-holding hooks. — Figure 2: A single STEELMATE unit. These units are rectangular in shape and feature multiple hooks to accommodate different rebar sizes.

View inside the STEELMATE bucket, showing multiple orange STEELMATE units stacked together. — Figure 3: Multiple STEELMATE units within the storage bucket. The bucket provides convenient storage and easy access to the 40 pieces.

Uppsetning og uppsetning

The STEELMATE system is designed for quick and accurate installation of vertical rebar. Follow these steps for optimal results:

Measure and Install:

Measure for Rebar Layout: Use a 2x4 template to accurately measure and mark the rebar layout on your foundation. This ensures precise spacing for the vertical rebar.
Attach STEELMATE: Place the STEELMATE units onto the 2x4 template. The units are designed to fit securely.
Fasten All Tools: Securely fasten all STEELMATE units to the 2x4 template using 6D Duplex nails. This creates a stable and unified assembly.
Clamp Rebar in Place: Position the vertical rebar into the STEELMATE units and clamp them securely. Repeat this process for all necessary rebar placements.

STEELMATE is compatible with rebar sizes 3, 4, 5, 6, 7, and 8, providing versatility for various project requirements.

Notkunarleiðbeiningar

Once installed, STEELMATE units provide a stable framework for pouring concrete, ensuring that vertical rebar remains straight and correctly positioned. This system is ideal for:

Form & Pour construction.
CMU (Concrete Masonry Unit) Block construction.
ICF (Insulated Concrete Form) construction.

Byggingarsvæði view with a worker pouring concrete, showing STEELMATE units in use stabilizing vertical rebar before concrete pour. — Figure 5: STEELMATE in use on a construction site. The units are visible at the base of the vertical rebar, ensuring proper alignment during concrete pouring.

The system significantly reduces the time required for rebar setup, allowing for faster project completion and improved accuracy.

Viðhald og endurnýting

STEELMATE units are designed for multiple uses, contributing to their cost-effectiveness. Proper removal ensures their longevity.

Removal and Reuse:

Individual Removal:

Remove 6D Duplex Nail: Carefully remove the 6D Duplex nail from the 2x4 template.
Use Hammer Claw: Use a hammer claw to lift off the STEELMATE tool from the rebar.

Template Removal:

Leave All Tools Fastened: Keep all STEELMATE units fastened to the 2x4 template.
Firmly Knock Off: Firmly knock off the entire 2x4 template with a hammer, ensuring all units detach cleanly.

After removal, clean any concrete residue from the STEELMATE units and store them in the provided bucket for future use. This practice ensures the tools remain in good condition for repeated applications.

Úrræðaleit

While STEELMATE is designed for straightforward use, here are some common considerations:

Rebar Not Fitting Securely: Ensure you are using rebar sizes 3, 4, 5, 6, 7, or 8. Verify that the rebar is properly seated within the STEELMATE's hooks.
Template Instability: Make sure the 6D Duplex nails are fully driven and the 2x4 template is stable on the foundation. Uneven surfaces can affect stability.
Difficulty Removing Units: If units are difficult to remove, ensure all nails are extracted first. For template removal, a firm, even strike with a hammer should dislodge the assembly.
Damage to Units: Inspect units for any damage before reuse. While durable, extreme force or improper handling can cause wear. Discard any visibly damaged units to maintain structural integrity.

Tæknilýsing

Eiginleiki	Smáatriði
Vörumerki	STÁLMÁL
Fyrirmynd	STEELMATE 1 Bucket of 40 Pcs.
Efni	Stál
Litur	Öryggisappelsínugult
Lögun	Rétthyrnd
Atriðaform	Bar
Compatible Rebar Sizes	3, 4, 5, 6, 7, 8
Framleiðandi	STÁLMÁL
ASIN	B08467KHPV
Dagsetning fyrst í boði	24. janúar 2020

Upplýsingar um ábyrgð

Specific warranty details for the STEELMATE 1 Bucket of 40 Pcs. are not provided in the product information. For any warranty-related inquiries, please contact the manufacturer directly using the support information below.

Stuðningur og samband

For further assistance, technical support, or product inquiries, please contact STEELMATE:

Framleiðandi: STÁLMÁL
Websíða: www.steelmate.com
Heimilisfang: 4020 Palos Verdes Dr. North, Ste. 205, Rolling Hills Estates, CA 90274, USA
Vörunúmer: 0860002591605

Please refer to the product's packaging or the official STEELMATE websíðu fyrir nýjustu tengiliðaupplýsingar og stuðningsúrræði.

	R269 高清隐藏式录像仪使用说明书 - Steelmate Steelmate R269 高清隐藏式录像仪 (Dashcam)的详细使用说明书，包含安装指南、功能介绍、操作方法、规格参数、常见问题及保修条款。
	Notendahandbók fyrir STEELMATE SPT100 TPMS greiningartólið Ítarleg notendahandbók fyrir STEELMATE SPT100 TPMS greiningartækið, þar sem ítarlegar upplýsingar eru um forskriftir, notkun, forritun skynjara, endurnámsferli, kerfisstillingar og hugbúnaðaruppfærslur.
	Notendahandbók fyrir STEELMATE hjálmaljósakerfi - Uppsetning og notkun H1, H2, H3 Notendahandbók fyrir STEELMATE hjálmaljósakerfið, sem fjallar um uppsetningu, forskriftir, virkni, hleðslu og forritun stýrieiningar fyrir gerðir H1, H2 og H3. Inniheldur ítarlegar leiðbeiningar og upplýsingar um FCC-samræmi.
	Notendahandbók fyrir mælaborðsmyndavélina Steelmate M5 Notendahandbók fyrir Steelmate M5 mælaborðsmyndavélina, sem fjallar um uppsetningu, notkun, stillingar og bilanaleit.
	Notendahandbók fyrir mælaborðsmyndavélina Steelmate M3 Notendahandbók fyrir Steelmate M3 mælaborðsmyndavélina, sem veitir ítarlegar leiðbeiningar um uppsetningu, grunnnotkun, stillingar, bilanaleit og tæknilegar upplýsingar.
	Notendahandbók fyrir Steelmate C40 mælaborðsmyndavél fyrir atvinnubíla Notendahandbók fyrir Steelmate C40 mælaborðsmyndavélina, hönnuð fyrir atvinnubifreiðar. Þessi handbók nær yfir vöruna yfirview, hnappavirkni, stillingar, snjallaksturseiginleikar eins og blindsvæðisgreining (BSD), uppsetningarleiðbeiningar og upplýsingar.

STEELMATE STEELMATE 1 Bucket of 40 Pcs.