myGEKOgear GO1228G

Notendahandbók fyrir myGEKOgear Orbit 122 bílmyndavélina

Model: GO1228G

Inngangur

This manual provides comprehensive instructions for the installation, operation, and maintenance of your myGEKOgear Orbit 122 Vehicle Camera. Please read this manual thoroughly before using the device to ensure proper functionality and safety.

Innihald pakka

Gakktu úr skugga um að allir hlutir sem taldir eru upp hér að neðan séu innifaldir í pakkanum þínum:

myGEKOgear Orbit 122 Dash Cam and two blind spot mirrors

Image: The myGEKOgear Orbit 122 Dash Cam shown alongside two circular blind spot mirrors, representing the package contents.

Vara lokiðview

Familiarize yourself with the components of your Orbit 122 Vehicle Camera.

Framan View

Framan view of myGEKOgear Orbit 122 Dash Cam

Image: The front of the myGEKOgear Orbit 122 Dash Cam, featuring the main camera lens with "FULL HD F=2.0/f=3.2mm DIGITAL CAMCORDER" text around it.

Hlið View (Hnappar)

Hlið view of myGEKOgear Orbit 122 Dash Cam showing control buttons

Mynd: Hlið view of the dash cam, displaying three control buttons: an up arrow (likely for navigation/Wi-Fi), an 'OK' button, and a down arrow (likely for navigation).

Hlið View (Hafnir)

Hlið view of myGEKOgear Orbit 122 Dash Cam showing USB port and power button

Image: The opposite side view of the dash cam, showing a USB port, a power button, and another button (possibly for mode or menu).

Efst/neðst View (Hafnir)

Efst view of myGEKOgear Orbit 122 Dash Cam showing TF card slot and microphone

Mynd: Efst view of the dash cam, showing a "TF" card slot for the microSD card and a "MIC" label for the microphone.

Uppsetning

Follow these steps to install and power your dash cam:

  1. Uppsetning: Attach the windshield suction mount to a clean, dry area on your vehicle's windshield, ensuring it does not obstruct your view. Secure the dash cam to the mount.
  2. Settu inn MicroSD kort: Insert the provided 8GB microSD card into the TF card slot on the dash cam. Ensure it is inserted correctly until it clicks into place.
  3. Rafmagnstenging: Connect the 12-24V car charger to the USB port on the dash cam. Route the cable neatly along the windshield and dashboard to your vehicle's cigarette lighter socket or auxiliary power outlet.
  4. Kveikt á: Start your vehicle. The dash cam will automatically power on and begin recording. If it does not power on automatically, press the power button.

Video: This video demonstrates the installation process for a myGEKOgear dash cam (Orbit 110 model, similar to Orbit 122). It shows how to mount the camera, connect the power cable, and route it for a tidy setup. The dash cam powers on automatically when the car starts.

Notkunarleiðbeiningar

The Orbit 122 is designed for straightforward operation.

Viðhald

Til að tryggja bestu mögulegu afköst og endingu bílmyndavélarinnar:

Úrræðaleit

If you encounter issues with your Orbit 122, refer to the following common solutions:

VandamálLausn
Mælaborðsmyndavélin kviknar ekki.Ensure the car charger is securely connected to both the dash cam and the vehicle's power outlet. Verify the vehicle's power outlet is functioning. Try manually pressing the power button.
"Memory Full" error or not recording.Format the microSD card through the dash cam's menu. Ensure loop recording is enabled. Replace the microSD card if the issue persists, as it may be faulty.
Léleg myndgæði.Clean the camera lens. Ensure the protective film has been removed from the lens. Check video resolution settings in the menu to confirm it's set to 1080P.
G-sensor not triggering or too sensitive.Adjust the G-sensor sensitivity setting in the dash cam's menu. Lower sensitivity for fewer false triggers, higher for more detection.

Tæknilýsing

EiginleikiSmáatriði
VörumerkimyGEKOgear
Nafn líkansGO1228G
Myndbandsupplausn1080p full HD
Field Of View120 gráður
Sérstakur eiginleikiAuto Incident Recording (G-Sensor)
TengitækniUSB
Gerð uppsetningarSogfesting
Þyngd hlutar4 aura
Vörumál2 x 2 x 1 tommur
LiturSvartur
Rafhlöður1 Lithium Ion rafhlaða nauðsynleg (fylgir með)
FramleiðandiPAPAGO Inc

Ábyrgð og stuðningur

For warranty information or technical support, please refer to the official myGEKOgear websíðuna eða hafðu samband við þjónustuver þeirra beint. Geymdu kaupkvittunina sem sönnun fyrir kaupunum.

Tengd skjöl - GO1228G

Preview myGEKOgear Orbit 132 mælaborðsmyndavél: Stutt notendahandbók
Ítarleg og fljótleg notendahandbók fyrir myGEKOgear Orbit 132 bílmyndavélina, sem fjallar um uppsetningu, eiginleika, notkun og forskriftir. Lærðu hvernig á að nota bílmyndavélina á áhrifaríkan hátt.
Preview Notendahandbók fyrir myGEKOgear ORBIT 951 mælaborðsmyndavélina
Ítarleg notendahandbók fyrir myGEKOgear ORBIT 951 mælaborðsmyndavélina, þar sem ítarleg lýsing er á uppsetningu, notkun, eiginleikum og forskriftum fyrir bestu mögulegu upptöku í ökutæki.
Preview Notendahandbók fyrir MyGekoGear Orbit 951 1080P HD tvöfalda mælaborðsmyndavél
Ítarleg notendahandbók fyrir MyGekoGear Orbit 951 1080P HD tvöfalda mælaborðsmyndavélina, sem fjallar um uppsetningu, notkun, eiginleika, öryggisráðstafanir og tæknilegar upplýsingar.
Preview myGEKOgear Orbit 110 mælaborðsmyndavél: Stutt notendahandbók
Comprehensive user manual for the myGEKOgear Orbit 110 dash camera, covering setup, features, operation, settings, and specifications. Learn how to install and use your dash cam effectively.
Preview MyGEKOgear ORBIT 130 bílmyndavél: Stutt notendahandbók
Ítarleg notendahandbók fyrir MyGEKOgear ORBIT 130 bílmyndavélina, sem fjallar um uppsetningu, eiginleika, notkun, stillingar og forskriftir.
Preview Notendahandbók fyrir myGEKOgear Moto Snap
User manual for the myGEKOgear Moto Snap, a compact camera designed for motorcycles and scooters, detailing setup, features, operation, specifications, and regulatory information.