Inngangur
The DOVEET DR-41 Atomic Digital Wall Clock is designed to provide accurate time, date, and environmental information with ease. Featuring a large, easy-to-read LCD display, it automatically synchronizes with the WWVB atomic clock signal for precise timekeeping. This manual will guide you through the setup, operation, and maintenance of your new atomic clock and its wireless outdoor sensor.

Figure 1: The DOVEET DR-41 Atomic Digital Wall Clock with its accompanying wireless outdoor sensor.
Helstu eiginleikar
- Atóm nákvæmni: Built-in receiver for WWVB broadcast signal from NIST, Fort Collins, Colorado, USA, ensuring precise time synchronization daily.
- Jumbo 4.5" Tall LCD Time Display: Large, easy-to-read display showing time (hours, minutes, seconds), indoor and outdoor temperature, calendar, and day of week. Ideal for visibility from a distance.
- Þráðlaus útiskynjari: Measures accurate indoor/outdoor temperature and humidity in °F or °C. Wireless range up to 328ft (100M) in open areas.
- Rafhlöðuknúin: Main unit powered by 4 AA batteries, outdoor sensor by 2 AAA batteries (not included). Extended battery life up to 18 months due to efficient chip design.
- Fjölhæf staðsetning: Can be hung on a wall or placed on a table using the integrated kickstand.
Sjónrænir eiginleikar

Figure 2: The clock features a significantly larger display compared to standard clocks, enhancing readability.

Figure 3: The wireless outdoor sensor offers a transmission range of up to 328 feet in open environments.

Mynd 4: Yfirview of the clock's display elements and rear control buttons for various functions.

Figure 5: The clock and sensor are battery-powered, offering long operational life.
Uppsetningarleiðbeiningar
- Settu rafhlöður upp:
- Open the battery compartment on the back of the main clock unit. Insert 4 new AA batteries, observing polarity (+/-).
- Open the battery compartment on the wireless outdoor sensor. Insert 2 new AAA batteries, observing polarity (+/-).
- Ensure both units are powered on within 3 minutes of each other for successful pairing.
- Skynjarasamtenging: The outdoor sensor will automatically attempt to pair with the main unit. A signal strength indicator will appear on the clock's display once connected. If pairing fails, press the "CHANNEL" button on the main unit to re-register the channel, or re-insert batteries in both units.
- Samstilling atómtíma (WWVB):
The clock will automatically attempt to receive the WWVB atomic signal from Fort Collins, Colorado. This usually occurs overnight. Place the clock in an area with good reception, away from large metal objects or electronic interference. A tower icon will appear on the display when the signal is successfully received.
To manually initiate atomic signal reception, press and hold the "DOWN/RCC" button for 3 seconds. The clock will begin searching for the signal.
- Stilla tímabelti: Press the "UP/ZONE" button repeatedly to cycle through the available time zones (EST, CST, MST, PST, AKST, HST) until your desired time zone is displayed.
- Val á hitaeiningu: Press the "DOWN/RCC" button briefly to switch between Fahrenheit (°F) and Celsius (°C) for temperature display.
Uppsetning myndbandsleiðbeiningar
Video 1: Official DOVEET guide on setting up the atomic clock and its features.
Notkunarleiðbeiningar
Sýna upplýsingar:
- Tími: Large digits display hours, minutes, and seconds. AM/PM indicator is present for 12-hour format.
- Dagsetning og vikudagur: Displays month, day, and the full day of the week.
- Innihitastig og raki: Shown on the left side of the lower display.
- Útihiti og raki: Shown on the right side of the lower display, received from the wireless sensor.
- Atommerkisvísir: A tower icon indicates successful reception of the WWVB signal.
- DST vísir: Displays when Daylight Saving Time is active.
- Vísir fyrir lágt rafhlaða: An icon will appear in the upper right of the screen when batteries are low.
Button Functions (Rear of Unit):
| Hnappur | Virkni (Stutt ýting) | Function (Press & Hold) |
|---|---|---|
| SETJA | Confirm setting in setting mode. | Farið í tímastillingarham. |
| VÖRUN | Switch between normal time and alarm time display. | Farðu í viðvörunarstillingu. |
| UP / ZONE | Advance value in setting mode; Cycle time zones. | (No specific long press function for normal operation) |
| DOWN / RCC | Switch temperature unit (°F/°C). | Initiate manual atomic signal reception. |
| RÁS | Cycle through outdoor sensor channels (1, 2, 3, or auto-cycle). | Re-register outdoor sensor channel. |
Note: The clock can display readings from up to 3 outdoor sensors. Use the CHANNEL button to switch between them or enable auto-cycling.
Viðhald
- Skipt um rafhlöðu: When the low battery indicator appears, replace all batteries in both the main unit and the outdoor sensor. It is recommended to use high-quality, non-leaking batteries (e.g., Lithium batteries) to prevent damage to the device, especially for long-term use.
- Þrif: Wipe the clock and sensor with a soft, dry cloth. Do not use abrasive cleaners or chemicals, as they may damage the display or casing.
- Staðsetning skynjara: For optimal performance and longevity, place the outdoor sensor in a shaded area that is protected from direct sunlight and heavy rain. While the sensor is splash-proof, prolonged exposure to harsh weather conditions can affect its accuracy and lifespan.
Úrræðaleit
- Engin eða dauf skjámynd:
- Check battery polarity and ensure batteries are fresh. Replace all batteries if necessary.
- Outdoor Temperature/Humidity Not Displaying or Inaccurate:
- Ensure batteries in the outdoor sensor are fresh and correctly installed.
- Press the "CHANNEL" button on the main unit to re-establish connection or cycle through channels.
- Move the outdoor sensor closer to the main unit to improve signal strength. Avoid large metal objects or thick walls between the units.
- Ensure the sensor is not in direct sunlight, which can cause artificially high temperature readings.
- Atomic Time (WWVB) Signal Not Received:
- Place the clock near a window or in an open area, away from electronic devices that may cause interference.
- Manually initiate signal reception by holding the "DOWN/RCC" button for 3 seconds.
- Note that signal reception can be affected by atmospheric conditions, geographical location, and time of day (best reception is often overnight).
- Incorrect Date/Day of Week:
- Ensure the correct year is set if manually setting the time, as this can affect the calendar function. The atomic signal should correct this automatically once received.
Tæknilýsing
| Eiginleiki | Smáatriði |
|---|---|
| Vörumerki | DÚFA |
| Gerðarnúmer | DR-41 |
| Skjár Tegund | Stafrænn LCD |
| Tímaskjár | Hours, Minutes, Seconds (4.5" tall numbers) |
| Hitastig (innandyra) | Not specified, typically 0°C to 50°C (32°F to 122°F) |
| Hitastig (úti) | Not specified, typically -40°C to 70°C (-40°F to 158°F) |
| Rakamagn | Not specified, typically 20% to 95% RH |
| Þráðlaus skynjarasvið | Up to 328 ft (100 M) in open air |
| Aflgjafi (aðaleining) | 4 x AA rafhlöður (fylgir ekki) |
| Aflgjafi (úti skynjari) | 2 x AAA rafhlöður (fylgir ekki) |
| Vörumál | 14.3''W x 9.3''H x 1.3''D (approximate, from feature bullets) |
| Þyngd hlutar | 2.61 pund (1.19 kíló) |
| Efni | Akrýlónítríl bútadíen stýren (ABS) plast |
| Gerð uppsetningar | Wall Mount or Tabletop (with kickstand) |
Ábyrgð og stuðningur
For warranty information or technical support regarding your DOVEET DR-41 Atomic Digital Wall Clock, please refer to the contact information provided on the product packaging or visit the official DOVEET webGeymið kaupkvittunina vegna hugsanlegra ábyrgðarkrafna.



