KING KB2405-1-ECO2S-PLUS

KING KB ECO2S+ 5KW 240V Electronic Garage Heater Instruction Manual

Model: KB2405-1-ECO2S-PLUS

Vörumerki: KING

1. Inngangur

The KING KB ECO2S+ series unit heater provides efficient and user-friendly heating for various spaces. This model, KB2405-1-ECO2S-PLUS, features a 5KW / 240V power output, 2-stage heating, and an integrated electronic thermostat with a remote control and remote temperature sensor for optimal comfort and energy savings. It is designed for use as primary or supplemental heat sources in warehouses, stores, or large garages.

Helstu eiginleikar:

2. Mikilvægar öryggisupplýsingar

Read all instructions before installing or using this heater. Failure to follow these instructions may result in electric shock, fire, property damage, or personal injury.

3. Innihald pakka

Staðfestið að allir hlutir séu til staðar og óskemmdir þegar pakkinn er opnaður:

KING KB ECO2S+ heater unit, remote control, remote temperature sensor, and mounting bracket
Figure 1: Included components of the KING KB ECO2S+ heater package.

This image displays the main heater unit, a black remote control, a white remote temperature sensor, and a grey universal mounting bracket, all included in the product package.

4. Uppsetning

4.1 Uppsetning hitara

The universal mounting bracket allows for both wall and ceiling installation. Ensure the mounting surface is structurally sound to support the heater's weight (approximately 40 lbs). Use appropriate lag bolts or expansion bolts provided in the hardware pack.

  1. Attach the universal bracket to the desired wall or ceiling location using appropriate fasteners.
  2. Align the heater unit with the bracket and secure it using the large knobs on the sides, allowing for angle adjustment.
  3. Adjust the heater angle to direct airflow as needed. The bracket offers four adjustable positions.
Til baka view of KING KB ECO2S+ heater showing the fan and mounting points
Mynd 2: Aftan view of the heater, illustrating the fan and mounting points for the bracket.

This image shows the back of the grey heater unit with a protective grill covering the fan. Mounting holes are visible on the sides for attaching the universal bracket.

4.2 Raflagnir

This heater requires a 240V dedicated circuit. Installation must be performed by a licensed electrician. The 5KW model typically requires a 40-amp breaker and 4-8 AWG copper wire. Ensure all local electrical codes are followed.

  1. Aftengdu rafmagn: Turn off power at the main circuit breaker before beginning any wiring.
  2. Access Wiring Compartment: Locate and remove the single Phillips screw on the side panel to open the wiring compartment.
  3. Remove Knockout: Select an appropriate knockout on the side of the heater for your wiring. Use pliers to remove the knockout.
  4. Setjið upp álagslétti: Insert the provided grommet with integral strain relief into the knockout hole.
  5. Tengja vír:
    • Connect the black wire to the L1 terminal.
    • Connect the red wire to the L2 terminal.
    • Connect the green (ground) wire to the grounding screw.
    Ensure all wires are securely tightened and that no insulation is under the terminals.
  6. Örugg raflögn: Tighten the strain relief to prevent the wire from pulling out and to protect the wiring from damage.
  7. Loka hólfi: Reattach the access panel with the Phillips screw.
  8. Endurheimta kraft: Turn on power at the main circuit breaker.
Internal wiring compartment of the KING KB ECO2S+ heater showing terminals and circuit board
Figure 3: Internal wiring connections for the heater.

This image shows the internal wiring compartment of the heater with various colored wires connected to terminals (L1, L2, and ground) and a circuit board. A label indicates "Red Wire L2" and "Black Wire L1" for 240V, 4-8AWG connections.

Video 1: This video demonstrates the electrical wiring process for the KING KB ECO2S+ heater, showing how to connect the power cable to the internal terminals and secure it with a strain relief. It also highlights the 2-stage heating feature and remote temperature sensing.

4.3 External Thermostat Switch

On the back of the heater, there is a toggle switch to select between the built-in thermostat (setting I) and an external thermostat (setting II). For most applications using the integrated controls, ensure the switch is set to 'I'. If connecting to an external 24V thermostat (e.g., Nest), set the switch to 'II' and ensure proper wiring by a licensed electrician.

5. Notkunarleiðbeiningar

5.1 Upphafsvirkjun

Upon initial power-up, the unit will beep, and the display will show the current room temperature. This indicates correct voltage og aflgjafi.

5.2 Stjórnborð og fjarstýring

The heater can be operated via the integrated control panel or the included remote control. The remote control offers convenient access to all functions from a distance.

Framan view of KING KB ECO2S+ heater showing the control panel
Mynd 4: Framan view of the heater with the control panel visible.

This image shows the front of the grey heater unit with horizontal louvers and a digital control panel at the bottom. The control panel has buttons for Power, Mode, Start/Stop, and Up/Down arrows, along with a digital temperature display.

5.3 Rekstrarstillingar

Ýttu á „Mode“ hnappinn til að fletta á milli tiltækra rekstrarhama:

5.4 Stilling hitastigs

Use the Up/Down arrow buttons on the control panel or remote to set your desired temperature. The heater will maintain this temperature automatically.

5.5 Tímamæliraðgerð

The timer mode allows you to set the heater to run for a predetermined length of time, after which it will automatically shut off. This feature helps conserve energy and provides convenience.

6. Viðhald

Reglulegt viðhald tryggir bestu mögulegu afköst og endingu hitara þíns. Aftengdu alltaf rafmagnið áður en viðhald er framkvæmt.

7. Bilanagreining

If your heater is not functioning correctly, refer to the following common issues and solutions:

VandamálMöguleg orsökLausn
Heater does not turn on / No display.No power to the unit or incorrect voltage.Check circuit breaker. Ensure 240V power is supplied. Verify wiring connections are secure.
Hitari er í gangi en gefur ekki frá sér hita.Thermostat switch set to external, or external thermostat not calling for heat.Ensure the external thermostat switch on the back of the unit is set to 'I' for internal thermostat control. If using an external thermostat, check its settings.
Ónægjandi upphitun.Incorrect mode selected, or obstructions.Select 'High Heat' mode. Ensure air inlets/outlets are clear. Check louvers are directed appropriately.
Fjarstýring virkar ekki.Tómar rafhlöður eða hindrun.Replace remote control batteries. Ensure no obstructions between remote and heater.

8. Tæknilýsing

Chart showing recommended garage heater wattage for different garage sizes
Figure 5: Recommended wattage for various garage sizes.

This chart provides guidance on selecting the appropriate heater wattage based on garage size (1-car to 4-car garages), square footage, BTU, CFM, and amperage. The 5KW model is suitable for 1-car garages up to 450 sq. ft.

9. Ábyrgð og stuðningur

For specific warranty details, please refer to the documentation included with your product or contact KING customer support. General product protection plans may be available for purchase separately.

Visit the official KING Store for more information: KING Store

Tengd skjöl - KB2405-1-ECO2S-PLUS

Preview King KBP ECO2S+ serían af samþjöppuðum hitara - Orkusparandi 2-Stage Upphitun
Ítarlegar upplýsingar um King KBP ECO2S+ seríuna af samþjöppuðum hitara, með orkusparandi ECO2S+ rafeindastýringu, 2 sekúndna hitara.tagRafræn upphitun, fjarstýrð hitaskynjun og fjölhæfir uppsetningarmöguleikar. Inniheldur upplýsingar um forskriftir, pöntunarupplýsingar og verkfræðiupplýsingar.
Preview Leiðbeiningar um uppsetningu og viðhald á King LPW-ECO hitara
Ítarleg leiðbeiningar um uppsetningu, notkun og viðhald á rafeindaofnum King LPW-ECO, þar á meðal öryggisleiðbeiningar, raflögn, uppsetningu fjarstýrðra skynjara og bilanaleit.
Preview Uppsetningar- og viðhaldshandbók fyrir King LPW ECO2S PRO með snjallstýringu
Þessi ítarlega handbók veitir ítarlegar leiðbeiningar um uppsetningu, viðhald og notkun King LPW ECO2S PRO rafmagnshitara. Kynntu þér örugga uppsetningu, forritun 7 daga ECO PRO stjórntækisins, raflögn, bilanaleit og ábyrgðarupplýsingar fyrir hámarks þægindi og orkusparnað.
Preview King PX-ECO 2-Stage Electronic Heater: Installation, Operation, and Troubleshooting Guide
Comprehensive guide for the King PX-ECO 2-Stage Electronic Heater, covering installation, wiring diagrams, wattage selection, remote sensor setup, operating instructions, and troubleshooting. Includes safety precautions and maintenance.
Preview Uppsetningar- og notkunarhandbók fyrir King PX ECO2S PRO 7 daga forritanlegan stjórnanda
Ítarleg leiðarvísir fyrir King PX ECO2S PRO 7-Day Programmable 2-StagRafrænn stjórnandi með fjarstýrðri hitaskynjun. Inniheldur öryggisleiðbeiningar, uppsetningu, raflögn, vöktuntagVal á rafrænum tækjum, pörun stýringa, uppsetning, rekstrarhamir, forritun, bilanaleit, viðhald og valfrjáls samþætting skynjara.
Preview King LPW ECO2S PRO hitari: Uppsetningar-, viðhalds- og notkunarhandbók
Ítarleg leiðarvísir fyrir King LPW ECO2S PRO 7-Day Programmable 2-StagRafrænn hitari með fjarstýrðum hitastýringu. Nær yfir uppsetningu, raflögn, vöktuntagUpplýsingar um val, uppsetningu, notkun, viðhald, bilanaleit og ábyrgð.