LENSGO 318C Wireless Lavalier Microphone User Manual

Inngangur

This manual provides detailed instructions for the setup, operation, and maintenance of your LENSGO 318C Wireless Lavalier Microphone system. The LENSGO 318C is a compact UHF wireless microphone system designed for clear audio recording with various devices, including cameras, smartphones, and camcorders.

Please read this manual thoroughly before using the product to ensure proper function and to maximize its performance.

Innihald pakka

Gakktu úr skugga um að allir hlutir sem taldir eru upp hér að neðan séu innifaldir í pakkanum þínum:

• Transmitter (TX) Unit
• Receiver (RX) Unit
• Segulklemma
• Windproof Frabbit Fur (Windscreen)
• Segulsylgja
• Microphone Collar Clip
• Camera Cable (TRS)
• External Lavalier Microphone
• USB hleðslusnúra (Micro USB)
• Smartphone Cable (TRRS)
• Card Pin (for reset)
• Geymslupoki
• Leiðbeiningarhandbók
• Ábyrgðarkort

Image: All components included in the LENSGO 318C Wireless Lavalier Microphone system package.

Vara lokiðview

The LENSGO 318C system consists of a transmitter (TX) and a receiver (RX) unit, both featuring a compact design and magnetic attachment for versatile placement.

Helstu eiginleikar:

• Þráðlaus UHF sending: Utilizes UHF technology for stable signal transmission over distances up to 30 meters (98.4 ft) in open areas.
• 20 valmöguleikar í rásum: Offers multiple channels to avoid interference and ensure clear audio.
• Magnetic Module Combination: Allows for convenient disassembly and assembly, enabling flexible mounting options.
• Built-in and External Microphone Options: Features a built-in microphone, with an option to connect an external lavalier microphone for enhanced audio capture.
• Endurhlaðanleg rafhlaða: Each unit includes a 500 mAh rechargeable battery, providing approximately 4 hours of operation on a full charge.
• Breið samhæfni: Compatible with DSLR cameras, camcorders, iPhones, Android smartphones, iPads, and computers (may require additional adapters).

Image: Detailed product analysis highlighting the various parts and functions of the LENSGO 318C transmitter and receiver units.

Image: The LENSGO 318C units demonstrating the magnetic module combination for easy attachment.

Uppsetningarleiðbeiningar

1. Hleðsla eininganna:

Before first use, fully charge both the transmitter (TX) and receiver (RX) units using the provided Micro USB charging cable. The charging port is located on the side of each unit. A full charge typically takes approximately 1.5 hours and provides up to 4 hours of operation.

Image: The Micro USB charging port and the single button for powering on the device.

2. Kveikt og pörun:

1. Press and hold the power button on both the TX and RX units for a few seconds to turn them on.
2. The units will automatically attempt to pair. Once successfully paired, the signal indicator light on the receiver will change from blue to cyan.
3. If pairing fails, ensure both units are charged and within range, then try again.

3. Tengist tækinu þínu:

• Fyrir snjallsíma/spjaldtölvur: Use the provided TRRS (3-ring) smartphone cable. Connect one end to the receiver's audio output interface and the other end to your smartphone's 3.5mm audio jack. (Note: Newer iPhones may require a Lightning to 3.5mm adapter, and some Android phones may require a USB-C to 3.5mm adapter, not included).
• For Cameras/Camcorders: Use the provided TRS (2-ring) camera cable. Connect one end to the receiver's audio output interface and the other end to your camera's microphone input jack.

Image: Visual representation of the wide compatibility of the LENSGO 318C with different recording devices.

4. Að festa hljóðnemann:

The transmitter unit can be attached to clothing using the magnetic clip or the microphone collar clip. For optimal audio quality, position the microphone approximately 6-8 inches (15-20 cm) from the speaker's mouth. If using the external lavalier microphone, plug it into the external microphone port on the transmitter. The built-in microphone will automatically deactivate when an external microphone is connected.

Image: The LENSGO 318C transmitter clipped to a person's shirt, with the external lavalier microphone attached.

Notkunarleiðbeiningar

Rásarval:

The LENSGO 318C features 20 UHF selectable channels. If you experience interference, you can change the operating frequency. To do this, simply press the power/frequency selection button on the transmitter unit. The receiver will automatically match the new frequency. It is recommended to select a channel with the least interference for optimal audio quality.

Hljóðeftirlit:

Some recording devices allow for real-time audio monitoring through their headphone jack. If your device supports this, connect headphones to monitor the audio being captured by the microphone. This helps ensure proper levels and sound quality during recording.

Upptaka:

Once the microphone system is set up and connected to your recording device, begin recording as you normally would with your camera, smartphone, or camcorder. Ensure the microphone input is selected on your device if applicable.

Mynd: Dæmiamples of the LENSGO 318C in use for different recording applications.

Viðhald

• Þrif: Use a soft, dry cloth to clean the microphone units. Avoid using liquids or abrasive cleaners.
• Geymsla: Store the microphone system in the provided storage bag in a cool, dry place when not in use.
• Umhirða rafhlöðu: Til að lengja líftíma rafhlöðunnar skal forðast að tæma tækin alveg oft. Hladdu þau reglulega, jafnvel þótt þau séu ekki í stöðugri notkun.
• Framrúða: Use the windproof fur (windscreen) when recording outdoors to minimize wind noise.

Úrræðaleit

• Ekkert hljóð/Lágt hljóðstyrkur:
  • Ensure both TX and RX units are powered on and successfully paired (receiver light is cyan).
  • Check that cables are securely connected to both the receiver and your recording device.
  • Verify that the correct cable (TRS for camera, TRRS for smartphone) is being used.
  • Adjust the microphone input level on your recording device.
  • Ensure the external lavalier microphone is fully plugged into the transmitter if used.
• Truflanir/léleg hljóðgæði:
  • Change the operating channel by pressing the power/frequency selection button on the transmitter.
  • Ensure the transmitter and receiver are within the optimal operating range (within 20 meters / 65.6 ft for best results).
  • Forðist hindranir milli sendisins og móttakarans sem gætu lokað fyrir merkið.
  • Minimize proximity to other wireless devices that might cause interference.
• Units Not Powering On/Charging:
  • Ensure the USB charging cable is properly connected to a power source and the units.
  • Prófaðu aðra USB hleðslusnúru eða straumbreyti.
  • If a unit is unresponsive, use the provided card pin to press the reset button (Insurance key) on the unit.

Tæknilýsing

Ábyrgð og stuðningur

LENSGO provides comprehensive after-sales support for the 318C Wireless Lavalier Microphone system.

• Svartími: Fyrirspurnum viðskiptavina er venjulega svarað innan 24 klukkustunda.
• Skilareglur: 60-day worry-free return period.
• Skipti: Replacement available within 12 months of purchase.
• Tæknileg aðstoð: Ráðgjöf eftir sölu og tæknileg aðstoð er veitt alla ævi.

For any questions or assistance, please contact LENSGO customer service.

Image: LENSGO customer service commitment details.