TM616 Weekly Programmable Timer

1. Inngangur

The SINOTIMER TM616 is a versatile weekly programmable digital timer switch designed for precise control of electrical equipment. It allows users to set specific ON/OFF times for various devices over a 24-hour or 7-day cycle, making it ideal for automating household appliances, lighting, and other electrical systems within DB boards.

Equipped with a built-in battery, the TM616 retains programmed settings during power outages, ensuring reliable operation. Its robust design and high capacity make it suitable for a wide range of applications requiring automated power management.

2. Helstu eiginleikar og einkenni

• Forritanleg stjórnun: Allows switching ON/OFF electrical equipment at preset times.
• Hár afkastageta: Supports up to 6500 Watts / 30 Amps, suitable for various loads.
• Sveigjanleg tímasetning: 24 hours / 7 days a week programmable with 17 ON/OFF settings.
• Afrit af minni: Built-in 1.2V 40Ma rechargeable battery preserves programs during power failure for up to 60 days.
• Nákvæmni: Auto time error correction of +/- 30 seconds weekly.
• Handvirk hnekking: Option to manually set ON/OFF.
• Lágmarksbil: Programs can be set with a minimum interval of 1 minute.
• Breitt tímamælisvið: From 1 minute to 168 hours.

3. Vöru lokiðview

Familiarize yourself with the components and layout of the TM616 timer.

Mynd 3.1: Framan View of TM616 Timer. This image displays the front panel of the TM616 timer, showing the digital LCD screen, control buttons (Clock, TIMER, C/R, Manual, Week, Hour, Minute), and the SINOTIMER brand logo.

Mynd 3.2: Hornlaga View with Wiring Diagram. Þessi mynd sýnir hornrétt view of the TM616 timer, highlighting the side label which includes the model number (TM-616), working voltage (220V AC), output control (30A), and a basic wiring diagram for connection.

Mynd 3.3: Neðst View with DIN Rail Mount. This image illustrates the bottom of the TM616 timer, clearly showing the yellow clip mechanism designed for easy installation onto a standard DIN rail.

4. Tæknilýsingar

5. Uppsetning og uppsetning

Mikilvægt: Installation should only be performed by a qualified electrician to ensure safety and compliance with local electrical codes. Disconnect power before installation.

5.1 DIN járnbrautarfesting

1. Ensure the power supply to the circuit is completely off.
2. Locate a standard 35mm DIN rail within your electrical panel or enclosure.
3. Align the TM616 timer with the DIN rail. The yellow clip on the bottom (refer to Figure 3.3) should engage with the rail.
4. Press the timer firmly onto the DIN rail until it clicks securely into place.

5.2 Raflagnatengingar

Refer to the wiring diagram on the side of the unit (Figure 3.2) and the specific voltage model (110V, 220V, or 12V) for correct connections. The TM616 typically has terminals for power input (L, N) and load output (NO, NC, COM for relay contacts).

• Connect the incoming Live (L) and Neutral (N) wires to the designated power input terminals of the timer.
• Connect the Live wire from your load (e.g., light, appliance) to the Normally Open (NO) terminal of the timer's relay.
• Connect the Common (COM) terminal of the timer's relay to the Live wire of your power supply.
• Gakktu úr skugga um að allar tengingar séu þéttar og öruggar.

Athugið: The specific wiring configuration may vary slightly depending on whether you are using the Normally Open (NO) or Normally Closed (NC) contact for your application. Always consult the diagram on the device and local electrical standards.

5.3 Upphafsvirkjun

After wiring, restore power to the circuit. The timer's LCD display should illuminate. If the display is blank, check power connections.

Við fyrstu ræsingu eða eftir langvarandi rafmagnsleysitage, the internal battery may need to charge for a few minutes before full functionality is available. The display might show "OFF" or a default time.

6. Notkunarleiðbeiningar

6.1 Stilling á núverandi tíma og degi

1. Ýttu á "Klukka" hnappinn og haltu honum inni.
2. Á meðan haldið er "Klukka", ýttu á "Week" til að stilla núverandi vikudag (MÁN., ÞRI., MIÐ., FIM., FÖS., LAU., SUN.).
3. Á meðan haldið er "Klukka", ýttu á "Hour" til að stilla núverandi klukkustund.
4. Á meðan haldið er "Klukka", ýttu á "Minute" til að stilla núverandi mínútu.
5. Slepptu "Klukka" hnappinn. Tíminn er nú stilltur.

6.2 Programming ON/OFF Events (17 Settings)

The TM616 allows for up to 17 ON/OFF program settings. Each program consists of an ON time and an OFF time.

1. Ýttu á "TÍMAMÆLIR" hnappinn einu sinni. Skjárinn mun sýna „1 ON“ og tíminn mun blikka.
2. Ýttu á "Week" to select the day(s) for this program (e.g., everyday, weekdays, weekends, specific days).
3. Ýttu á "Hour" til að stilla æskilega KVEIKTU klukkustund.
4. Ýttu á "Minute" til að stilla æskilega ON-mínútu.
5. Ýttu á "TÍMAMÆLIR" again. The display will show "1 OFF" and the time will flash.
6. Endurtakið skref 2-4 til að stilla SLÖKKUNARDAG, klukkustund og mínútu fyrir þetta forrit.
7. Ýttu á "TÍMAMÆLIR" again to move to the next program setting (e.g., "2 ON"). Repeat the process for up to 17 ON/OFF programs.
8. To exit programming mode and save settings, press the "Klukka" hnappinn hvenær sem er.

Ábending: If you need to clear a specific program, press the "C/R" hnappur á meðan viewing that program setting. This will reset the time to "--:--".

6.3 Handvirk hnekking

The "Manual" button allows you to override the programmed settings temporarily or permanently.

• Ýttu á "Manual" repeatedly to cycle through the modes:
  • ON AUTO: The timer is currently ON and will follow the programmed schedule.
  • SLÖKKT sjálfvirkt: The timer is currently OFF and will follow the programmed schedule.
  • Kveikt: The timer output is forced ON, overriding all programs.
  • SLÖKKT: The timer output is forced OFF, overriding all programs.
• Select "ON AUTO" or "OFF AUTO" to resume normal programmed operation.

7. Viðhald

• Þrif: Þurrkið ytra byrði tímastillisins með mjúkum, þurrum klút. Notið ekki slípiefni eða leysiefni.
• Rafhlaða: The internal rechargeable battery is designed for long life and typically does not require replacement. It charges automatically when the timer is connected to power. If the display is consistently blank or loses time rapidly after power outages, the battery may be depleted or at the end of its life.
• Umhverfi: Ensure the timer is installed in a dry environment, free from excessive dust, moisture, and extreme temperatures, within the specified operating range (-20°C to +50°C).

8. Bilanagreining

9. Ábyrgð og stuðningur

SINOTIMER products are manufactured to high-quality standards. For specific warranty information, please refer to the documentation provided at the time of purchase or contact your retailer. In case of technical issues or support inquiries, please reach out to the SINOTIMER customer service or your product supplier.

Please have your product model number (TM616) and purchase details ready when contacting support.