HQST 20A PWM Flush Mount Solar Charge Controller User Manual

1. Inngangur

The HQST 20A PWM Flush Mount Solar Charge Controller is designed to efficiently manage power flow from your solar panels to your battery bank, ensuring optimal charging and protection. It is compatible with both 12V and 24V battery systems, supporting various battery types including Lithium, Sealed (AGM), Gel, and Flooded batteries. This manual provides essential information for proper installation, operation, and maintenance of your solar charge controller.

2. Vöru lokiðview

Familiarize yourself with the components of your HQST solar charge controller:

This diagram illustrates the key components and dimensions of the HQST 20A PWM Flush Mount Solar Charge Controller. It measures approximately 5.11 inches in length and 3.54 inches in width.

1. 5V 1A USB Port: For charging USB-compatible devices.
2. Upp og niður hnappur: Used for navigating display screens and adjusting settings.
3. LCD skjár: Shows real-time system data and settings.
4. Load Button: Controls the DC load output.
5. Festingargöt: For securing the controller during installation.
6. Load Terminals: Tengdu við jafnstraumsálag þitt.
7. Rafgeymistengingar: Tengdu við rafhlöðubankann þinn.
8. Solar Terminals: Tengdu við sólarsellukerfið þitt.
9. Flat Mount Bracket: Optional bracket for surface mounting.

3. Uppsetning

3.1 Uppsetning stjórnandans

The controller offers flexible mounting options:

The controller can be installed using either a flush mount for a seamless look or a flat mount with the provided bracket. Choose a location that is dry, well-ventilated, and away from direct sunlight or heat sources.

• Flush Mount: Integrate the controller directly into a panel or wall for a clean finish.
• Flat Mount: Use the included bracket to mount the controller on a surface.

Ensure adequate space around the controller for air circulation to prevent overheating.

3.2 Raflagnatengingar

Follow the correct wiring sequence to prevent damage to the controller or battery:

1. Tengdu rafhlöðuna: First, connect the battery to the controller's battery terminals (7). Ensure correct polarity (positive to positive, negative to negative). The LCD will power on.
2. Tengdu sólarplötuna: Next, connect the solar panel to the controller's solar terminals (8). Ensure correct polarity.
3. Tengdu jafnstraumsálagið: Finally, connect your DC loads to the controller's load terminals (6). Ensure correct polarity.

Aftengingarröð: To disconnect the system, reverse the order: disconnect the load, then the solar panel, and finally the battery.

This wiring diagram illustrates the proper connection order for the solar panel, battery, and DC load to the HQST solar charge controller.

When connecting wires, ensure they are inserted into the correct square socket for the cable, not the screw hole. Fully unscrew the terminal screws, insert the wire ends, then tighten the screws securely.

3.3 Stilling á rafhlöðutegund

The controller automatically recognizes 12V/24V Sealed (AGM), Gel, and Flooded batteries. For Lithium batteries, manual parameter setting is required:

The LCD display allows for manual adjustment of battery parameters, especially crucial for Lithium-ion batteries.

• Press and hold the 'Up & Down' button to enter the setting mode.
• Use the 'Up & Down' buttons to navigate to the battery type setting (e.g., "b01" for Gel, "b02" for Sealed, "b03" for Flooded, "b04" for Lithium).
• For Lithium batteries, further adjust charging voltage, ofhleðslumagntage, and other parameters as per your battery manufacturer's specifications.
• Press and hold the 'Load' button to save the settings and exit.

4. Notkunarleiðbeiningar

4.1 LCD skjáleiðsögn

The LCD screen provides real-time monitoring of your solar system:

The intuitive LCD screen cycles through various operational data, including battery voltage, PV binditage, charge current, load current, controller temperature, and battery state of charge (SOC).

• Press the 'Up & Down' button (2) to manually cycle through the displayed parameters.
• The display will automatically cycle through parameters if no button is pressed for a few seconds.

4.2 Álagsstýring

The controller features a DC load output with multiple control modes:

• Press the 'Load' button (4) to manually turn the DC load output on or off.
• The controller supports 17 different load control modes, allowing for customized operation (e.g., dusk-to-dawn, timed operation). Refer to the full manual for detailed instructions on setting load modes.

4.3 USB hleðslutengi

The integrated 5V 1A USB port (1) can charge small electronic devices. This port is active when the DC load output is enabled.

4.4 4-Stage Snjallhleðsla

The controller employs an advanced 4-stage charging algorithm to optimize battery health and lifespan:

This graph illustrates the voltage og núverandi atvinnumaðurfiles during the 4-stage charging process, including Bulk, Boost/Absorption, Float, and Equalization stages.

• Magngjald: Gefur hámarksstraum til að hlaða rafhlöðuna hratt.
• Boost/Absorption Charge: Heldur stöðugu rúmmálitage to ensure the battery is fully charged without overcharging.
• Flotagjald: Minnkar rúmmáltage á lægra stig til að viðhalda fullri hleðslu á rafhlöðunni og bæta upp fyrir sjálfúthleðslu.
• Jöfnunargjald: (For lead-acid batteries only) Periodically overcharges the battery to balance cell voltagog koma í veg fyrir súlfötun.

5. Viðhald

To ensure the longevity and optimal performance of your HQST solar charge controller, perform the following maintenance checks:

• Regluleg skoðun: Periodically check all wiring connections for tightness and signs of corrosion. Loose connections can cause voltage dropar og ofhitnun.
• Hreinlæti: Keep the controller's exterior clean and free from dust, dirt, and debris. Use a dry cloth for cleaning. Do not use harsh chemicals or abrasive materials.
• Loftræsting: Ensure that the installation area remains well-ventilated to allow for proper heat dissipation. Blocked vents can lead to overheating and reduced efficiency.
• Heilsa rafhlöðu: Monitor your battery's health and performance regularly. Follow the battery manufacturer's maintenance guidelines.

6. Bilanagreining

Ef þú lendir í vandræðum með sólarhleðslustýringuna þína skaltu skoða eftirfarandi algeng vandamál og lausnir:

If the problem persists after attempting these solutions, please contact HQST customer support.

7. Tæknilýsing

8. Ábyrgð og stuðningur

This HQST product is backed by a 10 árs ábyrgð, reflecting our commitment to quality and durability. For any technical assistance, troubleshooting, or warranty claims, please contact HQST customer support.

You can find contact information and additional resources on the official HQST websíða: www.hqst.com

Please have your product model number (20A PWM Flush Mount) and purchase details ready when contacting support.