BERNY AM127M-C

BERNY Men's Automatic Mechanical Watch AM127M-C User Manual

Model: AM127M-C

1. Inngangur

Thank you for choosing the BERNY Men's Automatic Mechanical Watch, Model AM127M-C. This timepiece features a Japanese NH36 mechanical movement, sapphire glass, and 20ATM water resistance. This manual provides essential information for setting up, operating, and maintaining your watch to ensure its longevity and accurate performance.

BERNY Men's Automatic Mechanical Watch AM127M-C with blue dial

Figure 1: BERNY Men's Automatic Mechanical Watch AM127M-C (Blue Dial)

2. Uppsetning og fyrsta notkun

2.1 Upphafleg vinding

As an automatic mechanical watch, the AM127M-C requires initial winding to start. If the watch has stopped, manually wind it by rotating the crown. For optimal accuracy, it is recommended to wear the watch for more than 10 hours daily. If not worn regularly, wind it manually at a fixed time each day.

Video 1: How to adjust time and date for NH36 movement watch. This video demonstrates the process of setting the time and date on a watch with an NH36 movement, which is used in the AM127M-C.

2.2 Stilling á tíma og dagsetningu

The watch features a screw-in crown for enhanced water resistance. Follow these steps to set the time and date:

  1. Skrúfaðu krúnuna af: Rotate the crown counter-clockwise until it is released from the case.
  2. Pull to Position II (Time Setting): Gently pull the crown out to the second position. Rotate the crown clockwise or counter-clockwise to set the desired time. Ensure the AM/PM setting is correct; the day and date change around midnight. If the date changes at noon, advance the time by 12 hours.
  3. Push to Position I (Day/Date Setting): Push the crown back in one click to the first position.
  4. Setja dag: Snúðu krónunni réttsælis til að stilla vikudaginn.
  5. Stilltu dagsetningu: Snúðu krónunni rangsælis til að stilla dagsetninguna.
  6. Tryggðu krúnuna: Once time, day, and date are set, push the crown back to the zero position and screw it in clockwise until it is tight against the case. This ensures water resistance.
Diagram showing crown positions for setting time and date

Figure 2: Crown positions for setting the watch. Position 0 is screwed in, Position I is for day/date, Position II is for time.

3. Notkunarleiðbeiningar

3.1 Sjálfvirk hreyfing

Your BERNY watch is powered by a Japanese NH36 automatic mechanical movement. This movement is self-winding, meaning it gains power from the motion of your wrist. When fully wound, it has a power reserve that allows it to run for a period even when not worn. Regular wear or manual winding (as described in Section 2.1) is necessary to maintain its operation.

Nærmynd view of the NH36 automatic mechanical watch movement

Mynd 3: Innri view of the NH36 automatic movement.

3.2 Day and Date Display

The watch features a day and date display at the 3 o'clock position. The day of the week and the date change automatically every 24 hours. The date typically changes around 12 AM (midnight), and the day of the week changes around 4 AM.

3.3 Vatnsheldni (20ATM)

The AM127M-C is rated for 20ATM (200 meters / 656 feet) water resistance. This makes it suitable for daily wear, showering, swimming, and even recreational diving. Always ensure the screw-in crown is fully tightened before any water exposure to maintain its water resistance integrity.

BERNY watch submerged in water, illustrating 200M water resistance

Figure 4: The watch is designed for significant water exposure, up to 200 meters.

3.4 Super Luminous Dial

The watch features an oversize dial with super luminous Arabic numerals and indicators. This allows for easy readability in low-light conditions or at night after being exposed to light.

BERNY watch dial glowing brightly in the dark due to super luminous material

Figure 5: The watch dial illuminated in darkness, showcasing its super luminous properties.

4. Viðhald

4.1 Almenn umönnun

  • Þrif: Þurrkið úrið reglulega með mjúkum, þurrum klút til að fjarlægja ryk og bletti. Fyrir þrjósk óhreinindi, þurrkið örlítið.amp Hægt er að nota klút og þurrka hann síðan strax.
  • Forðastu erfiðar aðstæður: Protect your watch from extreme temperatures, strong magnetic fields, and harsh chemicals.
  • Áhrifavörn: While durable, avoid dropping the watch or subjecting it to severe impacts, which can affect the delicate mechanical movement.
  • Safírgler: The sapphire glass is highly scratch-resistant but not entirely scratch-proof or shatter-proof. Handle with care.

4.2 Varúðarráðstafanir varðandi vatnsþol

  • Always ensure the crown is fully screwed in before any contact with water.
  • Ekki nota krónuna eða þrýstihnappana (ef einhverjir eru) á meðan úrið er blautt eða í kafi.
  • Eftir að úrið hefur verið í saltvatni skal skola það með fersku vatni og þurrka það vandlega.
  • Water resistance is not a permanent condition and may be affected by aging gaskets or accidental shocks to the crown. It is recommended to have the water resistance checked periodically by a qualified watchmaker.

5. Bilanagreining

  • Úrið gengur ekki: If the watch has stopped, manually wind it by rotating the crown clockwise for approximately 55 turns while in the zero position (fully screwed in). Then, gently shake the watch to initiate movement.
  • Incorrect Day/Date Change: If the day or date changes at an incorrect time (e.g., noon instead of midnight), it indicates the AM/PM setting is incorrect. Pull the crown to Position II and advance the time by 12 hours.
  • Vatn inni í vakt: If you observe condensation or water inside the watch, immediately take it to a professional watchmaker for inspection and repair to prevent further damage.

6. Tæknilýsing

EiginleikiForskrift
GerðarnúmerAM127M-C
HreyfingJapanese NH36 Automatic Mechanical
MálsefniHardened Stainless Steel (HV800 hardness)
KristallCurved Sapphire Glass
Vatnsþol20 hraðbankar (200 metrar / 656 fet)
ValkostirOversize design, Super Luminous Arabic Numerals, Day and Date display at 3H
KrónaSkrúfkróna
HljómsveitarefniSilíkon ól
Tegund læsingarTang sylgja
Þvermál hylkis48 mm (1.89 tommur)
Málsþykkt14.5 mm (0.57 tommur)
Þyngd123 g (4.34 oz)
Diagram illustrating the dimensions of the BERNY AM127M watch

Figure 6: Key dimensions of the BERNY AM127M-C watch.

7. Ábyrgð og stuðningur

BERNY offers a 30-day return policy without reason. We are committed to providing 100% after-sales services for your satisfaction. If you have any questions, concerns, or require support regarding your BERNY watch, please contact the BERNY Official Store directly. Our customer service team is available to assist you.

Fyrir frekari upplýsingar eða til að hafa samband við þjónustuver, vinsamlegast farðu á BERNY Official Store on Amazon.

Tengd skjöl - AM127M-C

Preview AERA C-1 Cloud tíðnimælir - Handbók og upplýsingar
Ítarleg handbók og upplýsingar um sjálfvirka tímamælinn AERA C-1 Cloud. Kynntu þér upptrekk, stillingar, tímamælavirkni, umhirðu, vatnsheldni, ábyrgð og þjónustu.
Preview Notendahandbók fyrir Frigoglass Ice Cold Merchandiser
Ítarleg notendahandbók fyrir Frigoglass ískaldar kælivélar (ICM), sem nær yfir uppsetningu, notkun, öryggi og viðhald fyrir ýmsar gerðir, þar á meðal Super-5, Super-8 FFD, Super-9, Super-16SD, Super-16 FFSD S, CMV-375 NC, CMV-375, CMV-750 W, Smart-300 LC, Smart-360 C, Smart-1300 HD LC, MAX-450 C, MAX-500 C, MAX-700 C, MAX-900HD C, MAX-1000HD C, MAX-1000 SD C og Plus-500.
Preview Aera C-1 Shadow Owner's Manual: Specifications, Care, and Warranty
Comprehensive owner's manual for the Aera C-1 Shadow chronograph watch, detailing specifications, winding and setting instructions, chronograph function, strap management, care and maintenance, water resistance information, warranty details, and servicing recommendations.
Preview AERA C-1 Rennsport Special Edition Owner's Manual: Guide to Specifications, Operation, and Care
Explore the AERA C-1 Rennsport Special Edition owner's manual. Find detailed specifications, instructions for winding, setting, and using the chronograph, strap care, maintenance tips, water resistance information, warranty coverage, and servicing recommendations for your AERA watch.
Preview KIOSK Mechanical Fire-Resistant Safe (C Series) - Operating Instructions
Detailed instructions for operating and securing your KIOSK Mechanical Fire-Resistant Safe (C Series). Learn how to open, close, and manage your safe's combination and key.
Preview Skref fyrir frágang úra: Leiðbeiningar um pússun og áferð úrkassa
Lærðu nauðsynleg skref til að klára úrkassa, allt frá því að slípa brúnir og fjarlægja rispur til að fægja og áferðarmeðhöndla, með því að nota Jooltool vörur og 3M slípiefni.