Inngangur
This manual provides comprehensive instructions for the installation, operation, and maintenance of your DIGITUS Gigabit Ethernet Network Card. This PCI Express network card is designed to equip your PC with an additional Gigabit Ethernet port, enabling high-speed data transfer up to 1000 Mbps over existing network cabling. It includes a low-profile slot panel, making it suitable for various computer chassis sizes.

Figure 1: DIGITUS Gigabit Ethernet Network Card (Main View)
This image shows the overall view of the DIGITUS Gigabit Ethernet Network Card, highlighting its PCI Express interface and the RJ45 port.
Innihald pakka
Before proceeding with the installation, please verify that all components are present in the package:
- Gigabit Ethernet PCI Express netkort
- Low Profile Rifaplata
- Flýtileiðarvísir
- Support CD-ROM (containing drivers and utilities)

Figure 2: Network Card with Included Low Profile Krappi
This image displays the network card alongside the additional low-profile bracket, which can be used for installation in smaller computer cases.
Uppsetning og uppsetning
Follow these steps carefully to install your network card:
- Slökktu á og aftengdu: Slökktu alveg á tölvunni þinni og aftengdu rafmagnssnúruna úr vegginnstungunni.
- Opið tölvukassa: Fjarlægðu hliðarplötuna á tölvukassanum til að komast að móðurborðinu.
- Finndu PCI Express raufina: Identify an available PCI Express (PCIe) slot on your motherboard. The card requires a PCIe x1 slot or larger (e.g., x4, x8, x16).
- Fjarlægðu raufarhlífina: Carefully remove the metal slot cover from the back of your computer case corresponding to the chosen PCIe slot. If installing in a small form factor PC, you may need to replace the standard bracket on the network card with the included low-profile sviga.
- Settu inn netkort: Align the network card with the PCIe slot and press it firmly and evenly until it is securely seated. Ensure the bracket is flush with the back of the case.
- Öruggt kort: Secure the network card with the screw or latch mechanism provided by your computer case.
- Loka málinu og tengjast aftur: Replace the computer case side panel and reconnect all cables, including the power cable.
- Kveikja og setja upp rekla: Power on your computer. Once the operating system loads, insert the provided Support CD-ROM to install the necessary drivers. Alternatively, you can download the latest drivers from the Digitus official webFylgdu leiðbeiningunum á skjánum til að ljúka uppsetningu bílstjórans.

Figure 3: PCIe Connector Detail
Þessi mynd sýnir nærmynd view of the PCI Express connector on the network card, which plugs into the motherboard.
Notkunarleiðbeiningar
Once the network card is physically installed and drivers are successfully loaded, you can begin using it:
- Tengdu Ethernet snúru: Plug a standard RJ45 Ethernet cable from your network router, switch, or modem into the RJ45 port on the newly installed network card.
- Staðfestu tengingu: Observe the LED indicators on the RJ45 port. Typically, one LED indicates link activity (data transfer) and the other indicates connection speed (e.g., green for Gigabit, amber for 100 Mbps). Refer to the image below for LED locations.
- Netstillingar: Your operating system should automatically detect the new network connection. You may need to configure network settings (e.g., IP address, DNS) if your network does not use DHCP.
- Prófa tengingu: Opna a web browser or use network diagnostic tools to confirm internet access and network connectivity.

Figure 4: RJ45 Port with LED Indicators
This image shows the RJ45 Ethernet port on the network card, along with the two LED indicators that provide visual feedback on network link status and activity.
Viðhald
The DIGITUS Gigabit Ethernet Network Card is designed for reliable operation with minimal maintenance. However, consider the following:
- Bílstjóri uppfærslur: Periodically check the Digitus official websíða fyrir uppfærða rekla. Að halda rekla uppfærðum getur bætt afköst og leyst samhæfingarvandamál.
- Líkamleg skoðun: If you experience network issues, a physical inspection of the card and cable connections can be helpful. Ensure the card is securely seated in its PCIe slot and the Ethernet cable is firmly connected.
- Rykhreinsun: Over time, dust can accumulate inside your computer case. If necessary, carefully clean the area around the network card using compressed air to prevent overheating. Ensure the computer is powered off and unplugged before cleaning.
Úrræðaleit
If you encounter issues with your network card, refer to the following troubleshooting tips:
- Engin nettenging:
- Ensure the Ethernet cable is securely connected to both the network card and your router/switch.
- Verify that the network card is properly seated in the PCIe slot.
- Check if the network card drivers are correctly installed in your operating system's Device Manager. Reinstall drivers if necessary.
- Test with a different Ethernet cable or port on your router/switch.
- Hægur nethraði:
- Ensure your router/switch supports Gigabit Ethernet (1000 Mbps).
- Verify that the Ethernet cable is a Cat5e or Cat6 cable, suitable for Gigabit speeds.
- Check for updated drivers for the network card.
- Confirm that your operating system's network settings are configured for full duplex and Gigabit speed (if applicable).
- Vandamál með uppsetningu bílstjóra:
- Ensure you are installing the correct drivers for your operating system version (e.g., Windows 10, 64-bit).
- Slökkvið tímabundið á vírusvarnarforriti meðan á uppsetningu bílstjóra stendur ef það truflar.
- Try installing drivers in compatibility mode if experiencing issues on newer operating systems.
Tæknilýsing
| Eiginleiki | Smáatriði |
|---|---|
| Vörumerki | tölustafur |
| Gerðarnúmer | DN-10130-1 |
| Vélbúnaðarviðmót | PCI Express (PCIe x1), Ethernet |
| Data Link Protocol | Gígabit Ethernet (10/100/1000 Mbps) |
| Gagnaflutningshraði | 1000 megabitar á sekúndu |
| Samhæf tæki | Borðtölvur |
| Flísasett | Realtek RTL8111H |
| Vörumál | 5.51 x 7.87 x 1.38 tommur |
| Þyngd hlutar | 0.035 únsur (u.þ.b. 1 grömm) |
| Litur | Svartur |
Ábyrgð og stuðningur
DIGITUS products are designed for quality and reliability. This product comes with a standard limited warranty. Please refer to the warranty information provided on the Support CD-ROM or the official Digitus websíðu fyrir sérstaka skilmála og skilyrði.
For technical support, driver downloads, or further assistance, please visit the official Digitus support website or refer to the contact information provided in the Quick Start Guide included with your product. The included Support CD-ROM also contains drivers and additional resources.
EU Spare Part Availability Duration: 1 Year





