Reloop RP-7000 MK2 Direct Drive High Torque Turntable Instruction Manual

1. Inngangur

This manual provides essential information for the safe and efficient operation of your Reloop RP-7000 MK2 Direct Drive High Torque Turntable. Please read these instructions thoroughly before using the product to ensure proper setup, optimal performance, and longevity of your equipment. Keep this manual for future reference.

2. Öryggisleiðbeiningar

• Aflgjafi: Tengdu tækið aðeins við riðstraumsinnstungu með tilgreindum hljóðstyrk.tage. Ensure the power cord is not damaged or pinched.
• Raki: Do not expose the unit to rain, moisture, or excessive humidity. Avoid placing liquid-filled objects on the turntable.
• Loftræsting: Tryggið næga loftræstingu í kringum tækið. Ekki loka fyrir loftræstiop.
• Staðsetning: Place the turntable on a stable, level surface away from direct sunlight, heat sources, and strong magnetic fields.
• Þrif: Aftengdu rafmagnið áður en þú þrífur. Notið mjúkan, þurran klút. Forðist fljótandi hreinsiefni eða leysiefni.
• Þjónusta: Reynið ekki að gera við tækið sjálfur. Látið hæft starfsfólk sjá um alla þjónustu.

3. Innihald pakka

Gakktu úr skugga um að allir hlutir sem taldir eru upp hér að neðan séu í pakkanum þínum. Ef einhverjir hlutir vantar eða eru skemmdir skaltu hafa samband við söluaðila tafarlaust.

• Reloop RP-7000 MK2 Direct Drive High Torque Turntable (x2)
• Rykhlíf (x2)
• Digital Turntable Stylus Scale
• Record Care Solution
• Rafmagnssnúra
• RCA Cable
• Jarðvír
• Slippmotta
• Mótvægi
• Headshell with Cartridge (pre-mounted or separate, depending on region/bundle)

Mynd 1: Yfirview of the Reloop RP-7000 MK2 turntable bundle components.

4. Uppsetning

4.1 Upptaka og staðsetning

1. Carefully remove all components from the packaging. Retain packaging for future transport.
2. Place the turntable on a flat, stable, and vibration-free surface. Ensure there is enough space for the dust cover to open fully.
3. Attach the dust cover by aligning its hinges with the slots on the turntable's rear.

Mynd 2: Turntable with the dust cover in place.

4.2 Uppsetning fata og slippmottu

1. Carefully place the platter onto the center spindle. Ensure it sits flush.
2. Place the slipmat on top of the platter.

4.3 Uppsetning tónarma og hylkis

1. If not pre-mounted, attach the headshell with the cartridge to the tonearm. Secure it by turning the locking ring.
2. Screw the counterweight onto the rear of the tonearm.
3. Jafnvægi á tónarminum: Slepptu tónhandleggnum clamp. Adjust the counterweight until the tonearm is perfectly balanced and floats horizontally.
4. Stilla mælingarkraft: Return the tonearm to its rest and clamp it. Rotate the numbered ring on the counterweight to '0' without moving the counterweight itself. Then, rotate the entire counterweight to the recommended tracking force for your cartridge (typically 2-4 grams for DJ cartridges).
5. Stilla skautavörn: Stilltu skautavörnina til að passa við stillingu á mælingarkrafti.

4.4 Using the Digital Stylus Scale

The included digital stylus scale allows for precise measurement of your cartridge's tracking force, ensuring optimal sound quality and minimizing record wear.

1. Place the stylus scale on the platter.
2. Kveiktu á vigtinni með því að nota rofann.
3. Carefully lower the stylus onto the designated measuring point on the scale.
4. Read the tracking force displayed. Adjust the tonearm's counterweight as needed until the desired force is achieved.

Mynd 3: Digital Stylus Scale for precise tracking force measurement.

4.5 Tengingar

1. Hljóðúttak: Connect the RCA cables from the turntable's audio output to the PHONO input of your mixer or amplifier. If your mixer/amplifier does not have a PHONO input, you will need an external phono preamplíflegri.
2. Jarðvír: Connect the ground wire from the turntable to the ground terminal on your mixer or ampLéttir til að draga úr suði.
3. Kraftur: Connect the power cable to the turntable and then to a suitable AC power outlet.

5. Notkunarleiðbeiningar

5.1 Grunnspilun

1. Place a record on the slipmat.
2. Select the appropriate speed (33, 45, or 78 RPM) using the speed selector buttons.
3. Ýttu á BYRJA/STOPPA button to begin platter rotation.
4. Carefully lift the tonearm using the cueing lever and position the stylus over the desired groove on the record.
5. Lækkið vísibendanum til að setja stíllinn varlega á plötuna.
6. To stop playback, lift the tonearm using the cueing lever, return it to the tonearm rest, and press the BYRJA/STOPPA hnappinn.

Mynd 4: Turntable platter and control layout.

5.2 Tónhæðarstýring

The pitch fader allows you to adjust the playback speed (BPM) of the record. Move the fader up or down to increase or decrease the pitch. The pitch range can be selected using the range buttons (e.g., +/- 8%, 16%, 50%).

5.3 Öfug virkni

The RP-7000 MK2 features a reverse playback function. Press the ANDUR button to change the direction of platter rotation. Press it again to return to normal playback.

6. Viðhald

6.1 Þrif á snúningsdiski

• Taktu alltaf rafmagnið úr sambandi áður en þú þrífur.
• Use a soft, dry, lint-free cloth to wipe the surface of the turntable and dust cover.
• Forðist að nota slípiefni, leysiefni eða efnaúða, þar sem þau geta skemmt áferðina.

6.2 Umhirða stílls

• Gently brush the stylus from back to front using a soft stylus brush to remove dust and debris.
• Forðastu að snerta stíllinn með fingrunum.

6.3 Umsjón með skrám

The included record care solution helps maintain the quality of your vinyl records and prolong their lifespan.

1. Apply a small amount of record care solution to a clean, soft, lint-free cloth or a dedicated record cleaning brush.
2. Gently wipe the record surface in a circular motion, following the grooves.
3. Allow the record to dry completely before playing.

Mynd 5: Record Care Solution for maintaining vinyl quality.

7. Bilanagreining

8. Tæknilýsing

9. Ábyrgð og stuðningur

Reloop products are designed for reliability and performance. For warranty information, please refer to the warranty card included with your product or visit the official Reloop website. For technical support or service inquiries, please contact your authorized Reloop dealer or distributor.

Framleiðandi: Reloop

Dagsetning fyrst í boði: 8. júlí 2022