WORX NITRO 20V Cordless Paint Sprayer (Model WX020L) User Manual

Mikilvægar öryggisupplýsingar

Always wear appropriate eye and face protection. Use the paint sprayer in a well-ventilated area. Keep the device away from heat and open flames. Do not ingest materials or allow them to get into eyes. Keep out of reach of children. Dispose of batteries and paint materials according to local regulations.

Vara lokiðview

The WORX NITRO 20V Cordless Paint Sprayer (Model WX020L) is engineered for high performance and extended run time, offering cordless convenience for painting projects. It features a brushless motor for enhanced efficiency and durability.

Figure 1: WORX NITRO 20V Cordless Paint Sprayer with attached battery and paint container.

Helstu eiginleikar:

• Þráðlaus hönnun: Provides flexibility to paint anywhere without power cords.
• Hraðastýring: Allows for even paint flow and minimizes over-spraying.
• Rafhlaðakerfi með sameiginlegri orku: Compatible with over 75+ 20V, 40V, and 80V WORX Power Share tools.
• Stillanlegt úðamynstur: Choose between wide or narrow spray patterns for various project needs.
• Margir stútar: Includes four nozzle sizes (1.5mm, 1.8mm, 2.2mm, 2.6mm) suitable for stains, primers, and latex paints.
• Stór afkastageta: The paint container holds up to 34 fl oz (1000 ml) of material.
• Auðvelt að þrífa: Features a garden hose hook-up and detachable accessories for quick cleaning.

Uppsetning og samsetning

1. Hladdu rafhlöðuna: Insert the 4.0Ah battery into the 2A quick charger and allow it to fully charge before first use.


Figure 2: The 20V Power Share battery, essential for cordless operation.

2. Tengdu rafhlöðu: Once charged, slide the battery onto the base of the paint sprayer until it clicks into place.
3. Veldu stút: Choose the appropriate nozzle size (1.5mm, 1.8mm, 2.2mm, or 2.6mm) based on the material viscosity and desired spray pattern. One nozzle is pre-installed.
4. Settu upp stút: Twist off the front cap of the sprayer, insert the selected nozzle, and re-secure the cap.

Mynd 3: Nærmynd view of the sprayer nozzle, which can be changed for different spray patterns.
5. Undirbúa efni: Fill the 34 fl oz (1000 ml) paint container with your desired paint, stain, or primer. Ensure the material is properly thinned according to the paint manufacturer's instructions and tested for viscosity using the included viscosity cup.
6. Festa ílát: Screw the filled paint container securely onto the sprayer body.

Notkunarleiðbeiningar

1. Stilla loftflæði: Use the red dial at the back of the sprayer to adjust the air flow. Higher numbers typically provide more air for thicker materials.


Figure 4: The air flow control dial located at the rear of the sprayer for precise adjustment.

2. Veldu úðamynstur: Rotate the orange ear tabs on the front of the nozzle to switch between wide (horizontal or vertical) and narrow (round) spray patterns.
3. Prófúða: Before applying to your project, always test the spray pattern and flow on a scrap piece of material. Adjust air flow and spray pattern as needed to achieve an even, consistent coat.
4. Sækja um efni: Hold the sprayer approximately 6-12 inches from the surface. Press the trigger to begin spraying, moving the sprayer in smooth, even strokes. Overlap each pass by about 50% for uniform coverage.

Figure 5: Demonstrating the paint sprayer in action on a wooden surface.
5. Minimize Over-spraying: The speed control feature helps to evenly dispense paint and reduce over-spraying. Practice on scrap material to find the optimal settings for your project.

Sýningarmyndband af vöru:

Viðhald og þrif

Rétt þrif eftir hverja notkun er mikilvæg til að viðhalda afköstum og endingu málningarsprautunnar.

1. Tómt ílát: Remove the paint container and empty any remaining material.
2. Upphafsskolun: Fill the container with clean water (for water-based paints) or appropriate cleaning solution (for oil-based paints). Reattach the container and spray the cleaning liquid through the sprayer until it runs clear. Repeat if necessary.
3. Taktu í sundur: Detach the paint container, nozzle, and other removable parts.
4. Ítarleg hreinsun: Use the included wire brush and declogging needle to clean the nozzle, fluid tube, and any other parts that came into contact with paint. The garden hose adapter can be used for a more convenient rinse of the main sprayer head.
5. Þurrkið og geymið: Ensure all components are thoroughly dry before reassembling or storing the sprayer. Store in a clean, dry place.

Úrræðaleit

Tæknilýsing

• Vörumerki: WORX
• Gerðarnúmer: WX020L
• Aflgjafi: Rafhlaðaknúið (20V litíumjón)
• Tankur bindi: 1000 millilítrar (34 fl. oz.)
• Þyngd hlutar: 3.7 pund
• Vörumál: 11.3 x 10.83 x 5.47 tommur
• Innifalið íhlutir: Paint Sprayer, 4.0Ah battery, 2A quick charger, 4 nozzles (1.5mm, 1.8mm, 2.2mm, 2.6mm), viscosity cup, wire brush, declogging needle, garden hose adapter
• Efni: Plast
• Litur: Svartur, appelsínugulur
• Mælt er með notkun: Málverk

Ábyrgð og stuðningur

For detailed warranty information, please refer to the warranty card included with your product or visit the official WORX website. For technical support, replacement parts, or further assistance, please contact WORX customer service. Keep your purchase receipt for warranty claims.