Notendahandbók fyrir stafrænan tímarofa TM617

1. Inngangur

This user manual provides detailed instructions for the installation, operation, and maintenance of the SINOTIMER TM617 Digital Time Switch. The TM617 is a weekly programmable electronic timer designed for controlling electrical appliances with precision, offering a large LCD display for clear visibility.

Please read this manual thoroughly before using the device to ensure proper function and safety.

Mynd 1: Framan view of the TM617 Digital Time Switch.

2. Öryggisupplýsingar

• Gangið úr skugga um að rafmagnið sé aftengt fyrir uppsetningu eða viðhald til að koma í veg fyrir rafstuð.
• This device should be installed by a qualified electrician in accordance with local electrical codes.
• Ekki láta tækið verða fyrir raka, miklum hita eða tærandi umhverfi.
• Do not disassemble or modify the device. Any unauthorized modifications will void the warranty.
• Staðfestu binditage rating of the device (110V/220V) matches your power supply before connection.

3. Vörueiginleikar

• Large LCD display for clear and easy reading.
• Weekly programmable with up to 16 ON/OFF settings per day.
• Built-in rechargeable battery for memory backup when power is off.
• High accuracy and strong anti-interference capability.
• Manual override function.
• Suitable for controlling street lights, neon lights, advertising signs, production equipment, broadcast television, and other power loads.

4. Innihald pakka

Vinsamlegast athugið innihald pakkans við opnun:

• 1 x SINOTIMER TM617 Digital Time Switch
• 1 x Notendahandbók (þetta skjal)
• Mounting Screws (if included with your specific model)

Figure 2: TM617 with protective cover open and mounting screws.

5. Uppsetning og uppsetning

5.1 Uppsetning

The TM617 can be mounted on a wall or panel. Ensure a stable surface and adequate ventilation. Refer to the dimensional diagram for precise measurements.

Figure 3: TM617 Dimensional and Installation Diagram.

5.2 Raflagnamynd

Connect the power supply and load according to the wiring diagram provided on the device or in the detailed product specifications. Ensure all connections are secure and insulated. Incorrect wiring can damage the device or cause electrical hazards.

• Inntaksstyrkur: Connect the 110V/220V AC power supply to the designated input terminals.
• Hleðslaúttak: Connect the appliance or load to be controlled to the output terminals.

Note: The internal battery charges when the device is connected to power. Allow several hours for the battery to fully charge before initial programming if the device has been stored for a long period.

6. Notkunarleiðbeiningar

6.1 Hnappar aðgerðir

• P (Forrit): Enters or exits programming mode.
• D+ (Dagur): Adjusts day of the week in setting mode; selects day in program mode.
• H+ (Klukkustund): Adjusts hour in setting mode; selects hour in program mode.
• M+ (mínúta): Adjusts minute in setting mode; selects minute in program mode.
• Hætta við/Afturkalla (C/R): Resets current setting; recalls programs.
• Clock Icon (Set Time): Ýttu á til að fara í tímastillingarham.
• Manual Override Button (Hand Icon): Toggles between ON/AUTO/OFF modes.

Figure 4: TM617 Buttons and Display.

6.2 Stilling á núverandi tíma og degi

1. Ýttu á og haltu inni Klukkutákn hnappinn.
2. Á meðan haldið er á Klukkutákn, ýttu á D+ til að stilla núverandi vikudag (MÁN., ÞRI., MIÐ., FIM., FÖS., LAU., SUN.).
3. Á meðan haldið er á Klukkutákn, ýttu á H+ til að stilla núverandi klukkustund.
4. Á meðan haldið er á Klukkutákn, ýttu á M+ til að stilla núverandi mínútu.
5. Slepptu Klukkutákn hnappinn til að vista stillingarnar.

6.3 Forritun á kveikju-/slökkvunarlotum

The TM617 supports up to 16 ON/OFF programs. Each program consists of an ON time and an OFF time.

1. Ýttu á P hnappinn einu sinni. Skjárinn mun sýna „1 ON“.
2. Ýttu á D+ to select the day(s) for the first ON program (e.g., MO, TU, WE, TH, FR, SA, SU, or specific combinations).
3. Ýttu á H+ til að stilla klukkustundina fyrir fyrsta ON forritið.
4. Ýttu á M+ til að stilla mínútuna fyrir fyrsta ON forritið.
5. Ýttu á P button again. The display will show "1 OFF".
6. Repeat steps 2-4 to set the day(s), hour, and minute for the first OFF program.
7. Haltu áfram að ýta á P til að skipta á milli „2 ON“, „2 OFF“, upp í „16 ON“ og „16 OFF“ og stilla hvert forrit eftir þörfum.
8. Eftir að hafa stillt öll forrit sem þú vilt, ýttu á hnappinn Klukkutákn hnappinn til að fara úr forritunarstillingu og fara aftur í núverandi tímaskjá.

To clear a specific program, press C/R when that program is displayed in programming mode.

6.4 Handvirk hnekking

The manual override button (hand icon) allows you to temporarily or permanently change the output state without affecting programmed settings.

• Ýttu á Handvirk hnekking hnappur til að fletta í gegnum stillingar:
• Kveikt: Output is continuously ON, ignoring programs.
• SJÁLFvirkt: Output follows programmed ON/OFF cycles.
• SLÖKKT: Output is continuously OFF, ignoring programs.
• Veldu AUTO for normal operation based on your programmed schedule.

7. Viðhald

• Þrífið tækið reglulega með mjúkum, þurrum klút. Notið ekki slípiefni eða leysiefni.
• Ensure the device is kept free from dust and debris to maintain proper ventilation.
• The internal battery is designed for long life and typically does not require replacement. If the display becomes dim or settings are lost frequently, the battery may need servicing by a qualified technician.

8. Bilanagreining

9. Tæknilýsing

10. Ábyrgð og stuðningur

SINOTIMER products are manufactured to high quality standards. For warranty information, technical support, or service inquiries, please contact your original retailer or the SINOTIMER customer service department. Please have your product model number (TM617) and purchase date available when contacting support.

For the most up-to-date information, please visit the official SINOTIMER websíðuna eða vísa til umbúða vörunnar.