maXpeedingrods T6 Series Coilover Suspension Kit User Manual

Inngangur

This manual provides comprehensive instructions for the installation, adjustment, maintenance, and troubleshooting of your maXpeedingrods T6 Series Coilover Suspension Kit. Please read this manual thoroughly before attempting any installation or adjustment to ensure proper function and safety. Professional installation is recommended.

Eiginleikar vöru

• 24 Levels of Rebound Force Adjustment: Leyfir fínstillingu á damping for various driving conditions.
• Hæð stillanleg: Customize ride height by 1-3 inches for a desired stance.
• Háþrýstikraftsfjöðrar: Front spring rate of 10 kg/mm (560 lbs/in) and Rear spring rate of 7 kg/mm (392 lbs/in), tested for durability.
• Festing á koddakúlu efst: Designed for sharp and precise handling response.
• CNC Billet Aluminum Components: Durable and lightweight perches and locking rings.
• Hár stífur stimpilstöng: Features a 22mm front rod diameter with high-frequency heat treatment for strength and longevity.
• Optimized Damper Knob: Easier to operate and adjust damping stillingar.
• Full Length Dust Boot: Verndar stöngina og stimpilinn gegn ryki og rusli.
• Surface Sandblasting Lower Mount: Provides excellent wear-resistant performance.

Image: Close-up of the pillow ball top mount, designed for enhanced handling.

Image: Details of the optimized damper knob for easy adjustment and upgraded full aluminum plates for strength.

Upplýsingar um passa

This maXpeedingrods Coilover Suspension Kit (Model FC84PB) is compatible with the following vehicle models:

• Nissan 350Z Coupe RWD (Z33) 2003-2008
• Nissan 350Z Roadster Convertible RWD (Z33) 2003-2008
• Nissan Skyline Coupe RWD (V35) 2003-2007
• Infiniti G35 Coupe RWD (V35) 2003-2007
• Infiniti G35 Sedan RWD (V35) 2003-2006

Athugið: This kit is designed to lower the vehicle's ride height and does not maintain the original ride height.

Íhlutalisti

The maXpeedingrods T6 Series Coilover Suspension Kit typically includes the following components:

• 2x Fjöðrunarfjöðrar að framan
• 2x höggdeyfar að aftan
• 2x Afturfjöðrunarsett
• 2x C-lyklar
• 2x Allen lyklar

Image: Visual representation of the components included in the maXpeedingrods coilover kit packaging.

Uppsetningarleiðbeiningar

Öryggisráðstafanir

• Notið alltaf viðeigandi persónuhlífar (PPE), þar á meðal öryggisgleraugu og hanska.
• Gangið úr skugga um að ökutækið sé örugglega stutt á lyftu eða lyftu áður en vinna hefst.
• Vinnið aldrei undir ökutæki sem aðeins er stutt af tjakki.
• Disconnect the battery before working on any electrical components.
• Ef þú ert óviss um eitthvert skref skaltu ráðfæra þig við hæfan bifvélavirkja.

Coilover Assembly

The following steps detail the assembly of the coilover unit. Refer to the video for visual guidance.

1. Begin by sliding the spring seat onto the damper líkami.
2. Next, install the upper locker, followed by the lower locker, onto the threaded body.
3. Place the ring onto the damper stöng.
4. Slide the dust boot over the damper stöng.
5. Install the main spring onto the damper, ensuring it seats correctly.
6. Place the spring plate on top of the spring.
7. Position the top mount assembly over the damper rod and secure it.
8. Add the washer and then tighten the locking nut onto the damper rod to secure the top mount.
9. Adjust the spring preload correctly and lock it tight using the provided C spanners.
10. Ef við á, setjið stillihlífina á efri festinguna.

Uppsetning ökutækja

This video demonstrates the installation process of the coilover system on a vehicle. While specific vehicle models may vary, the general steps and principles apply.

1. Lyftið ökutækinu á öruggan hátt og fjarlægið hjólin.
2. Carefully remove the original suspension components, following your vehicle's service manual.
3. Install the assembled maXpeedingrods coilover units into the vehicle's suspension mounting points.
4. Secure all bolts and nuts to the manufacturer's specified torque settings.
5. Ensure brake lines and ABS sensor wires are clear of moving parts and properly secured.
6. Settu hjólin aftur upp og lækkaðu ökutækið.
7. Perform a wheel alignment after installation to ensure proper handling and tire wear.

Aðlögun og notkun

Hæðarstilling

The coilover kit allows for independent ride height adjustment. To adjust the height:

1. Loosen the lower locking ring on the threaded body.
2. Rotate the main spring perch to raise or lower the vehicle.
3. Once the desired height is achieved, tighten the lower locking ring securely against the spring perch.
4. Ensure both sides of the vehicle are adjusted evenly.

Image: Illustration of height adjustable coilovers with independent ride height and spring tension settings.

Image: Visual guide on how to twist the threaded body to adjust the shock suspension to the preferred height.

Damper Adjustment (24 Levels)

The coilovers feature 24 levels of rebound force adjustment, allowing you to customize the ride feel from soft to hard. The adjustment knob is located on the top of the coilover unit.

• Stig 0-8: Recommended for street use, providing a more comfortable ride.
• Stig 9-16: Mælt með fyrir fjallvegi eða hraðskreiða akstur, og býður upp á jafnvægi þæginda og afkasta.
• Stig 17-24: Ideal for race tracks, providing maximum stiffness for aggressive handling.

Image: Close-up of the adjuster knob, showing how to remove the cap and adjust damping with a spanner or by hand.

Image: Visual guide to the 24-level damping adjustment, with suggested settings for street, mountain, and track use.

Viðhald

Regular maintenance helps ensure the longevity and performance of your coilovers.

• Regluleg skoðun: Periodically check all mounting bolts, nuts, and locking rings for tightness. Inspect for any signs of wear, damage, or leaks.
• Þrif: Keep the coilover bodies and threads clean from dirt, salt, and debris. This prevents corrosion and ensures smooth height adjustments.
• Smurning: Apply a thin layer of appropriate grease to the threads if they become stiff during adjustment.
• Rykstígvél: Ensure dust boots are intact and properly seated to protect the piston rods.

Úrræðaleit

If you encounter issues with your coilover suspension, consider the following common problems and solutions:

If troubleshooting steps do not resolve the issue, please contact maXpeedingrods customer support.

Tæknilýsing

Ábyrgð og stuðningur

maXpeedingrods offers customer support for their products. For specific warranty details, technical assistance, or to report any issues, please refer to the warranty information provided with your purchase or contact maXpeedingrods directly through their official channels.

• Skilar: Venjulega er hægt að skila vörum auðveldlega innan 30 daga.
• Þjónustudeild: maXpeedingrods provides customer support for product inquiries and assistance.

Image: Information regarding easy installation and available customer support from maXpeedingrods.