Vara lokiðview
Mynd 0: Framan view of the Anern PSC 20A Solar Charge Controller, highlighting its LCD screen and control buttons.
The Anern PSC 20A Solar Charge Controller is designed to manage the power flow from your solar panels to your battery bank, ensuring efficient charging and protecting your battery from overcharge and over-discharge. This intelligent controller automatically detects 12V/24V system voltages and features a clear LCD display for monitoring system status and adjusting parameters. It includes dual USB ports for charging external devices.
Helstu eiginleikar
- Automatic management of solar panel and battery operation.
- Built-in industrial micro-controller for stable performance.
- Large LCD display for real-time data and adjustable parameters.
- Að fullu 3-stage PWM charge management (Bulk, ABS, Float).
- Multiple protection functions: short-circuit, open-circuit, reverse polarity, over-load, low voltage, og ofhleðsluvörn.
- Dual 5V/2A USB ports for device charging.
Öryggisleiðbeiningar
Please read and understand these safety instructions before installation and operation to prevent damage to the controller, battery, or other components.
- This controller is only suitable for lead-acid batteries: OPEN, AGM, and GEL types. It is not compatible with nickel-metal hydride, lithium-ion, or other battery types.
- The charge controller is designed exclusively for regulating solar modules. Do not connect any other charging sources to the charge regulator.
- The LCD display may have a voltage error of 0.2V - 0.3V, which is considered normal.
- Ensure battery cables are as short as possible to minimize power loss and maximize efficiency.
Tæknilýsing
| Parameter | Gildi |
| Rafhlaða Voltage | 12V/24V Auto Adapt |
| Hleðslustraumur | 20A |
| Losunarstraumur | 10A |
| Float Voltage | 13.7V (stillanlegt) |
| USB útgangur | 5V/2A (Dual USB) |
| Rekstrarhitastig | -35°C til +60°C |
| Vörumál | 12 x 5 x 17 cm |
| Vöruþyngd | 140 g (u.þ.b. 4.94 únsur) |
| Skjár Tegund | LCD |
| Efni | Plast |
Uppsetning og uppsetning
Follow these steps for proper installation of the solar charge controller. Ensure all connections are secure and correct to prevent damage.
- Tengdu rafhlöðuna: Fyrst skaltu tengja rafhlöðuna við hleðslustýringuna. Gakktu úr skugga um að pólunin sé rétt (+ í + og - í -). Stýringin mun sjálfkrafa greina spennu rafhlöðunnar.tage (12V eða 24V).
- Tengdu sólarplöturnar: Next, connect the solar panels (PV array) to the charge controller. Again, observe correct polarity.
- Tengdu jafnstraumsálagið: Finally, connect your DC load (e.g., lights) to the charge controller.
Important Wiring Sequence:
Battery → Solar Panels → DC Load
Mynd 1: Wiring diagram illustrating the connection sequence for the solar charge controller, including solar panels, battery, and load. Ensure positive and negative terminals are correctly matched.
Verndunaraðgerðir
The controller incorporates several protection features to safeguard your system:
Mynd 2: Yfirview of the controller's built-in protection mechanisms, including safeguards against reverse polarity, over-voltage, undir-binditage, and over-current conditions.
Rekstur
LCD skjáviðmót
The LCD provides real-time information about your solar system. The interface includes icons and numerical values for easy monitoring.
Mynd 3: Ítarlegt view of the LCD display, explaining each icon and its corresponding meaning for system status monitoring.
Hlaða vinnuhamur
The controller offers three distinct load working modes, which can be configured via the LCD interface:
- 24H (24-hour operation): The load operates continuously for 24 hours.
- 0H (Light control mode): The load works only after dark.
- 1H-23H (Light and time control modes): The load works after dark for a set duration, configurable from 1 to 23 hours.
Mynd 4: Visual representation of the three selectable load operating modes and their respective icons.
Viðhald
The Anern PSC 20A Solar Charge Controller is designed for low maintenance. However, regular checks can ensure optimal performance and longevity:
- Athugið reglulega allar raflagnatengingar til að tryggja að þær séu þéttar og lausar við tæringu.
- Haltu stjórntækinu hreinu og lausu við ryk og óhreinindi. Notaðu þurran klút til að þrífa.
- Tryggið næga loftræstingu í kringum stjórntækið til að koma í veg fyrir ofhitnun.
- Monitor the LCD display regularly for any error codes or unusual readings.
Úrræðaleit
Þessi kafli fjallar um algeng vandamál sem þú gætir lent í með sólarhleðslustýringunni þinni.
Algengar spurningar og svör
- Q: Why does the LCD screen become blank?
- A: The solar controller will stop outputting when the battery voltage drops below approximately 8V. In this state, the LCD screen will go blank. When the solar panels begin charging the battery again, the controller will resume output once the battery voltage fer aftur í 12.6V.
If you encounter other issues not listed here, please refer to the support section.
Ábyrgð og stuðningur
For warranty information or technical support, please contact Anern customer service through the retailer where you purchased the product or visit the official Anern website. Please have your model number (PSC-20A) and purchase details ready when contacting support.
