1. Inngangur
This manual provides detailed instructions for the installation, operation, and maintenance of the Avoltik Huawei Smart Power Sensor DTSU666-H. This high-quality, three-phase current sensor is designed for use in photovoltaic (PV) systems, offering precise energy measurement and reliable communication capabilities.
Please read this manual thoroughly before installation and operation to ensure safe and efficient use of the device.
2. Vörueiginleikar
- Three-Phase Current Sensor: Specifically designed for solar power systems.
- Wide Voltage Svið: Operates efficiently within a voltage svið 176 til 288 volt.
- Low Self-Consumption: Features very low power consumption, less than one Watt.
- Auðveld uppsetning: Designed for straightforward and effortless setup.
- Innbyggður LCD skjár: Displays performance data and allows for easy operation directly on the device.
- RS485 samskipti: Supports data communication via RS485, enabling remote data reading.
- Modbus-RTU Protocol: Utilizes the Modbus-RTU communication protocol for seamless integration.
Image: The Smart Power Sensor DTSU666-H with visual callouts for its main features, including its three-phase capability, easy installation, LCD screen, RS485 communication, and low power consumption.
3. Tæknilýsingar
| Flokkur | Forskrift |
|---|---|
| Fyrirmynd | DTSU666-H 250/50 mA |
| Mál (H x B x D) | 100 x 65.5 x 72 mm |
| Weight (incl. cable) | 1.5 kg |
| Gerð uppsetningar | DIN35 Teinn |
| Núverandi Tegund | 3P4W (3-Phase) |
| Inntak Voltage | 176-288 VAC (Phase/N) |
| Orkunotkun | ≤ 1 W |
| Samskiptaviðmót | RS485 |
| Baud hlutfall | 9,600 bps |
| Samskiptabókun | Modbus-RTU |
| Mælingarnákvæmni (rúmmáltage) | ±0.5 % |
| Measurement Accuracy (Current/Power/Energy) | ±1 % |
| Measurement Accuracy (Frequency) | ±0.01 Hz |
| Measurement Range (Phase-Phase Voltage) | 304 - 499 Vac |
| Measurement Range (Phase Voltage) | 176 - 288 Vac |
| Mælisvið (núverandi) | 0 - 250 A |
| Rekstrarhitasvið | -25°C til +60°C |
| Geymsluhitasvið | -40°C til +70°C |
| Hlutfallslegur raki | 5 % RH - 95 % RH |
Image: A detailed table outlining the technical specifications of the DTSU666-H Smart Power Sensor, including dimensions, weight, electrical parameters, and environmental conditions.
4. Innihald pakka
Þegar pakkinn er opnaður skal ganga úr skugga um að allir íhlutir séu til staðar og óskemmdir:
- 1x DTSU666-H Smart Power Sensor
- Current Transformers (250A/50mA)
- Nauðsynlegar tengisnúrur
Image: The complete package contents, showing the DTSU666-H Smart Power Sensor alongside its current transformers and connection cables.
5. Uppsetning og uppsetning
The DTSU666-H Smart Power Sensor is designed for easy installation, typically on a DIN35 rail. Ensure all safety precautions are followed during installation, especially when dealing with electrical systems.
5.1 Öryggisleiðbeiningar
- Aðeins hæft starfsfólk skal framkvæma uppsetningu.
- Disconnect all power sources before beginning installation.
- Notið viðeigandi persónuhlífar (PPE).
- Gakktu úr skugga um rétta jarðtengingu.
5.2 Uppsetning tækisins
- Locate a suitable DIN35 rail within your electrical panel or enclosure.
- Snap the DTSU666-H sensor onto the DIN rail until it clicks securely into place.
5.3 Raftengingar
Connect the sensor according to the wiring diagram provided with your PV system documentation. Key connections include:
- Voltage Inntak: Connect the three-phase voltage lines (L1, L2, L3) and neutral (N) to the corresponding terminals on the sensor.
- Current Transformer (CT) Connections: Connect the supplied current transformers to the main current lines of your PV system. Ensure correct polarity and connect the CT secondary wires to the sensor's current input terminals.
- RS485 samskipti: Connect the RS485 A and B terminals to your communication network (e.g., inverter, data logger) for Modbus-RTU communication.
Image: The DTSU666-H Smart Power Sensor shown in an installed context, emphasizing its role in a solar power system.
6. Rekstur
Once installed and powered on, the DTSU666-H will begin measuring electrical parameters. The integrated LCD screen allows for direct monitoring and basic configuration.
6.1 LCD skjár og leiðsögn
The LCD screen displays various real-time data such as voltage, current, power, and energy consumption. Use the buttons below the screen to navigate through the display menus:
- SET hnappur: Enters configuration mode or confirms a selection.
- ESC hnappur: Lokar valmynd eða hættir við aðgerð.
- Örvarhnappar (vinstri/hægri): Navigates between different display screens or adjusts values in configuration mode.
6.2 Data Monitoring
Regularly check the LCD display for key operational data. For detailed analysis and historical data, connect the sensor to a compatible monitoring system via the RS485 interface and Modbus-RTU protocol.
7. Viðhald
The Avoltik Huawei Smart Power Sensor DTSU666-H requires minimal maintenance. Regular checks can help ensure its longevity and accurate performance.
- Þrif: Haldið tækinu hreinu og ryklausu. Notið mjúkan, þurran klút til að þrífa. Notið ekki slípiefni eða leysiefni.
- Tengingarathuganir: Periodically inspect all electrical connections to ensure they are secure and free from corrosion.
- Umhverfisskilyrði: Gakktu úr skugga um að rekstrarumhverfið sé innan tilgreindra hitastigs- og rakastigsmarka til að koma í veg fyrir skemmdir.
No user-serviceable parts are inside the device. Do not attempt to open or repair the sensor yourself.
8. Bilanagreining
This section provides solutions to common issues you might encounter with your DTSU666-H Smart Power Sensor.
| Vandamál | Möguleg orsök | Lausn |
|---|---|---|
| Device not powering on / LCD blank | No power supply; Loose connections; Faulty device. | Check power input connections. Ensure circuit breaker is on. Verify voltage supply. If problem persists, contact support. |
| Incorrect readings on LCD | Incorrect CT wiring; Incorrect CT polarity; Sensor not calibrated. | Verify CT connections and polarity according to the wiring diagram. Ensure CTs are correctly sized for the application. |
| No communication via RS485 | Incorrect wiring (A/B reversed); Incorrect baud rate; Termination resistor missing/incorrect; Software configuration issue. | Check RS485 wiring (A to A, B to B). Verify baud rate and protocol (Modbus-RTU) settings on both sensor and master device. Ensure proper termination. |
| Tækið ofhitnar | Poor ventilation; Overload; High ambient temperature. | Ensure adequate ventilation around the device. Check if the current load exceeds the sensor's rating. Relocate to a cooler environment if necessary. |
If you encounter issues not listed here or if the suggested solutions do not resolve the problem, please contact Avoltik customer support.
9. Ábyrgð og stuðningur
Avoltik products are manufactured to the highest quality standards. For warranty information, please refer to the warranty card included with your product or visit the official Avoltik websíða.
For technical support, troubleshooting assistance, or spare parts, please contact Avoltik customer service:
- Websíða: Avoltik Official Store
- Netfang: [Refer to product packaging or website for specific email]
- Sími: [Refer to product packaging or website for specific phone number]
Please have your product model (DTSU666-H) and purchase date ready when contacting support.
10. Fjölhæf notkun
The Avoltik Huawei Smart Power Sensor DTSU666-H is a versatile and reliable solution suitable for various solar energy applications, ensuring optimal performance and monitoring.
Image: An illustration showing the versatility of solar power systems, indicating their applicability for roofs, open fields, boats, and balconies, all of which can benefit from the DTSU666-H sensor.
