YOUTASTE Bar Stools Set of 2 Instruction Manual

Inngangur

This manual provides detailed instructions for the assembly, operation, and maintenance of your YOUTASTE Bar Stools. Please read all instructions carefully before assembly and use to ensure safe and proper functionality. Keep this manual for future reference.

Image: YOUTASTE Bar Stools in a kitchen environment.

Öryggisupplýsingar

• Mælt með hámarksþyngd: This product has a maximum weight recommendation of 300 pounds. Do not exceed this limit.
• Gas Cap Removal: It is critical to remove the plastic gas cap from the gas lift cylinder before assembly. Failure to do so will prevent proper height adjustment.
• Rétt samsetning: Ensure all components are correctly assembled and all screws are tightened securely. Improper assembly may result in injury or damage to the product.
• Gólfvörn: The base features a non-slip rubber ring for floor protection and quiet use. Avoid dragging the stools to prevent damage to flooring.
• Stöðugleiki: Always ensure the stool is on a flat, stable surface before use.

Innihald pakka

Áður en samsetning hefst skal ganga úr skugga um að allir hlutar séu til staðar og óskemmdir. Ef einhverjir hlutar vantar eða eru skemmdir skal hafa samband við þjónustuver.

• Sæti (2)
• Grunnplata (2)
• Gaslyftuflaska (2)
• Fótpúði (2)
• Festingarplata (2)
• Screws and Allen Wrench (for assembly)
• Leiðbeiningarhandbók (1)

Image: Components and quality features of the YOUTASTE Bar Stools.

Samsetningarleiðbeiningar

Assembly is quick and typically takes 5-10 minutes per stool. Follow these steps:

1. Prepare the Gas Lift Cylinder: Locate the plastic gas cap on the top of the gas lift cylinder. Remove this cap before proceeding. This is crucial for the height adjustment mechanism to function.


Image: Gas cap removal from the gas lift cylinder.

2. Attach Footrest to Seat: Turn the seat upside down. Align the footrest with the pre-drilled holes on the underside of the seat. Secure it using the provided screws and Allen wrench. Ensure the longer screws are used for the front attachment points and shorter ones for the rear.
3. Setjið gaslyftuna í botninn: Place the large circular base plate on the floor. Insert the prepared gas lift cylinder into the central hole of the base plate.
4. Festa sæti við gaslyftu: Carefully place the assembled seat (with footrest attached) onto the top of the gas lift cylinder. Apply gentle downward pressure to secure it.
5. Staðfestu stöðugleika: Once assembled, test the stability of the stool. Ensure all connections are firm and the stool does not wobble.

Notkunarleiðbeiningar

• Hæðarstilling: To adjust the seat height, locate the lever positioned under the seat. While seated, pull the lever upwards to lower the seat. To raise the seat, stand up and pull the lever upwards; the seat will automatically extend. Release the lever at the desired height.
• 360° snúningur: The seat is designed to swivel 360 degrees, allowing for easy rotation and interaction without moving the base of the stool.

Viðhald

• Þrif: Wipe the faux leather upholstery with a damp cloth. For tougher stains, use a mild soap solution and then wipe clean with a damp klút. Forðist sterk efni eða slípiefni.
• Málmhlutir: Clean metal components with a soft, dry cloth. Avoid using abrasive materials that could scratch the finish.
• Reglulegar athuganir: Athugið reglulega allar skrúfur og tengingar til að tryggja að þær séu haldnar vel fastar. Herðið ef þörf krefur.

Úrræðaleit

• Hæðarstilling á stól: Ensure the plastic gas cap has been completely removed from the gas lift cylinder. If the cap is removed and the issue persists, check for any obstructions or contact support.
• Hægðir í hægðum: Check that all screws are securely tightened. Ensure the stool is placed on a flat, even surface.
• Erfiðleikar við að snúa: Ensure no debris is obstructing the swivel mechanism. If the issue persists, contact support.

Tæknilýsing

Image: Detailed dimensions of the YOUTASTE Bar Stool.

Ábyrgð og stuðningur

YOUTASTE provides 24-month replacement support for bar stools. This warranty covers manufacturing defects and issues arising from normal use. It does not cover damage from misuse, improper assembly, modifications, or impact.

For questions, missing parts, or support, please contact Baolande Furniture, the manufacturer, via their official channels or the platform where the product was purchased.

Image: YOUTASTE After-Sales Service details.