1. Inngangur
This manual provides detailed instructions for the installation, operation, and maintenance of your Brandmotion Wireless Observation IR Camera System with a 7-inch HD Monitor (Model AHDS-7810V2). This system is designed to enhance visibility and security for various vehicles, including RAM 1500 (09-2018) and Heavy Duty (2010-Current) trucks, as well as RVs and trailers. It features a wireless camera, a 7-inch HD monitor with DVR capabilities, and infrared night vision for clear viewdag eða nótt.
2. Innihald pakka
Vinsamlegast staðfestu að allir hlutir sem taldir eru upp hér að neðan séu innifaldir í pakkanum þínum:
- 7-inch HD DVR Monitor
- Wireless HD Observation Camera
- Monitor Suction Cup Mount
- Monitor Dashboard Mount
- Festingarfesting myndavélar
- DC Power Cable for Monitor (Cigarette Lighter Adapter)
- DC Power Cable for Camera
- Antennas (for Monitor and Camera)
- Uppsetningarbúnaður (skrúfur o.s.frv.)
Mynd 2.1: All components included in the Brandmotion AHDS-7810V2 Wireless HD Observation System, including the 7-inch monitor, wireless camera, various mounting brackets, power cables, and antennas.
3. Uppsetning og uppsetning
3.1 Uppsetning skjás
- Choose a suitable location for the 7-inch HD monitor on your vehicle's windshield or dashboard that does not obstruct your view eða trufla loftpúða.
- Attach the suction cup mount or dashboard mount to the monitor.
- Secure the monitor to the chosen surface. Ensure the mount is firmly attached.
- Connect the DC power cable to the monitor and plug the other end into your vehicle's 12V accessory outlet (cigarette lighter).
- Attach the antenna to the designated port on the monitor.
3.2 Uppsetning myndavélar
- Select a mounting location for the wireless camera that provides the desired field of view, typically at the rear of the vehicle or trailer. Ensure the location allows for a clear line of sight for wireless transmission if possible.
- Use the provided camera mounting bracket and hardware to securely attach the camera. You may need to drill pilot holes.
- Adjust the camera's swivel head to achieve the optimal viewing horn.
- Connect the DC power cable to the camera. This cable typically connects to a 12V power source on your vehicle (e.g., reverse lights for a backup camera function, or constant power for continuous observation).
- Attach the antenna to the designated port on the camera.
Mynd 3.1: The wireless camera positioned next to the 7-inch HD monitor, illustrating the compact design of the observation system.
3.3 Initial Pairing (if necessary)
The camera and monitor are typically pre-paired from the factory. If they do not connect automatically, refer to the 'MENU' options on the monitor to initiate a pairing process. Ensure both devices are powered on and within range (up to 80 feet for a reliable connection).
4. Notkunarleiðbeiningar
4.1 Kveikt/slökkt
Once connected to power, the monitor should power on automatically or by pressing the power button. To power off, press and hold the power button.
4.2 Vöktunarstýringar
The monitor features several buttons for navigation and control:
- CAM: Switches between connected cameras (supports up to 4 cameras).
- Matseðill: Accesses system settings, including pairing, display options, and recording settings.
- - / +: Navigates menu options or adjusts settings (e.g., brightness, volume).
- KOMA INN: Staðfestir val í valmyndinni.
- KORT: Accesses recorded footage or initiates recording.
4.3 Viewing Mode
The monitor can display video from a single camera or multiple cameras simultaneously in a split-screen view. Use the 'CAM' button to cycle through available camera views.
Mynd 4.1: The 7-inch HD monitor shows a split-screen view from multiple cameras, illustrating the system's capability to display various angles simultaneously.
4.4 Recording Functionality
The monitor includes DVR functionality, allowing you to record video footage. Insert a microSD card (up to 128GB, not included) into the designated slot. Refer to the 'MENU' for recording settings such as continuous recording, loop recording, and motion detection.
Mynd 4.2: The system supports continuous recording to enhance security, capturing footage frá mörgum myndavélum.
4.5 Innrauð nætursjón
The camera is equipped with infrared (IR) LEDs to provide clear visibility in low-light conditions or complete darkness.
5. Viðhald
5.1 Þrif
To clean the monitor screen and camera lens, use a soft, lint-free cloth. For stubborn dirt, dampen the cloth with water or a mild, non-abrasive cleaning solution. Avoid harsh chemicals that could damage the surfaces.
5.2 Veðurvernd
The wireless camera features an IP65 international protection rating, indicating it is protected against dust ingress and low-pressure water jets from any direction. This makes it suitable for outdoor use in various weather conditions.
Mynd 5.1: The wireless camera features a waterproof casing, providing protection against environmental elements for enhanced durability.
6. Bilanagreining
| Vandamál | Möguleg orsök | Lausn |
|---|---|---|
| Engin mynd á skjá | Power issue, camera/monitor not paired, out of range, antenna not connected. | Check power connections. Ensure both camera and monitor are powered on. Re-pair devices via monitor menu. Ensure devices are within 80ft range and antennas are securely attached. |
| Myndin blikkar eða gæðin eru léleg | Weak wireless signal, interference, low battery (if applicable). | Reduce distance between camera and monitor. Check for sources of interference (e.g., other wireless devices). Ensure stable power supply. |
| Upptaka virkar ekki | No microSD card, card full, card not formatted, recording settings incorrect. | Insert a compatible microSD card (up to 128GB). Format the card via monitor menu. Check recording settings. |
| Monitor mount not secure | Surface not clean, suction cup not properly engaged. | Clean the mounting surface thoroughly. Ensure the suction cup lever is fully engaged. Consider using the dashboard mount for a more permanent solution. |
| Installation screws too long/holes too small | Incompatibility with specific vehicle mounting points. | Use appropriate drill bits to enlarge holes if necessary, or acquire shorter screws suitable for your specific application. |
7. Tæknilýsing
| Eiginleiki | Smáatriði |
|---|---|
| Nafn líkans | AHDS-7810V2 |
| Skjástærð | 7 tommur |
| Myndbandsupplausn | 1080p |
| Rammahlutfall | 30 rammar á sekúndu |
| Tengitækni | Þráðlaust net (Wi-Fi) |
| Þráðlaust samskiptasvið | Up to 80 feet (reliable connection) |
| Fjöldi rása | 4 (styður allt að 4 myndavélar) |
| Aflgjafi | DC (4 Volts, 3 Watts) |
| Camera Light Source Type | Innrautt |
| Camera International Protection Rating | IP65 (Rykþétt, varið gegn vatnsgeislum) |
| Stuðningur við geymslu | MicroSD card up to 128GB (for DVR) |
| Efni | Plast |
| Vörumál (L x B x H) | 3.5 x 8.5 x 12 tommur |
| Þyngd hlutar | 3.07 pund |
8. Ábyrgð og stuðningur
8.1 Upplýsingar um ábyrgð
The Brandmotion Wireless Observation IR Camera System (AHDS-7810V2) comes with a 2 árs ábyrgð frá kaupdegi. Þessi ábyrgð nær til galla í efni og framleiðslu við eðlilega notkun. Vinsamlegast geymið kaupkvittunina vegna ábyrgðarkröfu.
8.2 Þjónustuver
For technical assistance, troubleshooting, or warranty inquiries, please contact Brandmotion's US-based support team. Detailed contact information can be found on the official Brandmotion websíðunni eða í gegnum söluaðila þinn.
Heimsókn www.brandmotion.com fyrir frekari upplýsingar og stuðningsúrræði.