1. Inngangur
The Xhorse Key Tool Max Pro is an advanced professional device designed for locksmiths and automotive technicians. It integrates key programming, transponder identification, remote generation, and diagnostic functions into a single, portable unit. This manual provides comprehensive instructions for its setup, operation, maintenance, and troubleshooting.
Figure 1: Xhorse Key Tool Max Pro with accessories including the device, carrying case, OBD cable, and various super chips.
2. Helstu aðgerðir
The Key Tool Max Pro offers a wide array of functionalities to assist in automotive key and immobilizer services:
- Transponder Identification and Cloning: Supports identification of most immobilizer transponders and online calculation for ID46, ID48 (96bits), and Toyota 8A/8H transponders.
- IMMO Programming: Comprehensive immobilizer programming for thousands of car models, including support for CAN_FD models like Cadillac CT4/CT5, Buick GL8, and Encore.
- Remote Generation: Capable of generating remotes for over 6000 vehicle models from 200 car brands and over 100 garage remote models. Supports HCS/Fixed code cloning, non-HCS rolling code cloning, and various fixed code editing.
- Advanced Hardware Design: Features a built-in OBD module for direct vehicle connection, enabling easy IMMO programming. Includes current and voltage detection for battery leakage and voltage ávísanir.
- Super Chip Compatibility: Works seamlessly with Xhorse Super Chips for transponder cloning and remote generation, offering a versatile solution for various chip types (ID46/40/43/4D/4E/8C/8A/T3/47/7935/7930/7937 etc.).
- Remote Renewal: Allows renewal of chips for reuse with compatible Xhorse devices like Mini Key Tool or Key Tool Max.
Mynd 2: Yfirview of the main functions supported by the Xhorse Key Tool Max Pro.
3. Uppsetning
Before using your Xhorse Key Tool Max Pro, ensure it is properly set up and charged.
3.1 Upphafshleðsla
Connect the device to a power source using the provided USB cable. The device will indicate charging status on its screen. Ensure a full charge before first use for optimal battery life.
3.2 Virkjun og uppfærslur tækis
Upon first power-on, follow the on-screen prompts to activate the device. It is highly recommended to connect the device to Wi-Fi and perform all available system and database updates to ensure access to the latest vehicle models and functions.
3.3 Connecting to Vehicle (for IMMO Programming)
For functions requiring vehicle communication, connect the provided OBD cable to the Key Tool Max Pro and then to the vehicle's OBD-II port. Ensure the vehicle's ignition is in the ON position (or as required by the specific procedure) but the engine is off.
Figure 3: Demonstrations of using Super Chip, Super Remote, and OBD connection for IMMO Programming.
4. Notkunarleiðbeiningar
4.1 Transponder Identification and Cloning
The device can identify various transponder types and perform cloning operations.
- Navigate to the "Transponder Clone" function on the main menu.
- Place the transponder or key to be identified into the device's transponder coil area.
- The device will display the transponder type and data.
- For cloning, follow the on-screen instructions, which may involve placing an Xhorse Super Chip into the coil for writing.
Figure 4: Supported chip types for transponder identification and cloning.
4.2 IMMO forritun
This function allows for adding new keys or programming immobilizer systems for various vehicles.
- Connect the Key Tool Max Pro to the vehicle's OBD-II port.
- Select "IMMO Programming" from the main menu.
- Choose the vehicle make, model, and year from the extensive database.
- Follow the specific on-screen instructions for the selected vehicle, which may include reading immobilizer data, adding keys, or performing all keys lost procedures.
- Ensure stable power supply to both the device and the vehicle during the entire process to prevent interruptions.
4.3 Remote Generation
Generate new remotes for vehicles and garage doors.
- Select "Remote Generate" from the main menu.
- Choose the desired vehicle brand or garage door type.
- Select the specific remote type or model.
- Place a compatible Xhorse remote into the device's remote generation area.
- Initiate the generation process. The device will write the necessary data to the remote.
- After generation, the remote may need to be programmed to the vehicle using the IMMO Programming function or a separate vehicle-specific procedure.
Figure 5: The Key Tool Max Pro supports generating remotes for a vast range of vehicles and garage doors.
4.4 Chip Cloning Process (Detailed Example)
This section details the typical steps for cloning a transponder chip using the Key Tool Max Pro and a VVDI Mini Key Tool (if used as an auxiliary device).
- Enter the "Chip Copy" Function Menu: On the Key Tool Max Pro, navigate to and select the "Transponder Clone" or "Chip Copy" function.
- Read Original Key Data: Put the original key into the coil of the VVDI Mini Key Tool (or the Key Tool Max Pro's transponder coil area) and read the data of the original key. The device will display the transponder type and data.
- Calculate and Prepare for Cloning: The device will perform necessary calculations. Once complete, remove the original key. Put the Xhorse Super Chip into the induction coil of the device. Click the "Clone" function, then click "Start" to begin the cloning process.
- Klónun lokið: The device will indicate when the cloning process is finished. The Super Chip now contains the cloned transponder data.
Figure 6: Detailed steps for the chip cloning process.
Figure 7: Interface for setting/renewing VVDI Super Chips to different ID types.
5. Viðhald
Proper maintenance ensures the longevity and optimal performance of your Key Tool Max Pro.
- Þrif: Notið mjúkan, þurran klút til að þrífa tækið. Forðist að nota slípiefni eða leysiefni.
- Geymsla: Store the device in its protective carrying case in a cool, dry place away from direct sunlight and extreme temperatures.
- Hugbúnaðaruppfærslur: Regularly check for and install software updates via Wi-Fi to ensure the device has the latest features, vehicle coverage, and bug fixes.
- Umhirða rafhlöðu: Avoid fully discharging the battery frequently. Charge the device regularly, even if not in active use, to maintain battery health.
- Snúruskoðun: Periodically inspect all cables (OBD, USB, leakage detection) for any signs of wear, damage, or fraying. Replace damaged cables immediately.
6. Bilanagreining
Þessi hluti fjallar um algeng vandamál sem þú gætir rekist á.
| Vandamál | Möguleg orsök | Lausn |
|---|---|---|
| Ekki kveikir á tækinu. | Low battery; Power button not pressed correctly; Device malfunction. | Charge the device for at least 30 minutes. Press and hold the power button for 3-5 seconds. If issue persists, contact technical support. |
| Failed to connect to vehicle OBD. | Loose OBD connection; Vehicle ignition off; Damaged OBD cable; Vehicle OBD port issue. | Ensure OBD cable is securely connected to both the device and vehicle. Turn vehicle ignition to ON position. Try a different OBD cable if available. Check vehicle's OBD port for damage. |
| Transponder/Remote cloning fails. | Incorrect chip/remote type; Chip/remote not placed correctly; Insufficient power; Software outdated. | Ensure you are using a compatible Xhorse Super Chip or remote. Verify the chip/remote is correctly placed in the coil/generation area. Ensure device is sufficiently charged. Update device software. |
| Tækið frýs eða svarar ekki. | Software glitch; Low memory. | Perform a forced restart (refer to device manual for specific button combination, usually holding power button for 10+ seconds). Ensure sufficient storage space for updates. |
7. Tæknilýsing
| Eiginleiki | Smáatriði |
|---|---|
| Vörumerki | Xhestur |
| Fyrirmynd | Key Tool Max Pro |
| Built-in Modules | OBD Module, Current and Voltage Uppgötvunareining |
| Transponder Support | ID46, ID48 (96bits), Toyota 8A/8H, and many more (refer to Figure 4) |
| IMMO Programming | Thousands of car models, including CAN_FD (Cadillac CT4/CT5, Buick GL8, Encore) |
| Fjarkynslóð | Over 6000 vehicle remotes (200 brands), over 100 garage remotes |
| Samhæfni | Xhorse Super Chip, Xhorse Super Remote, VVDI Mini Key Tool, Xhorse Key Tool Max |
| Fyrsti laus dagsetning | 29. júní 2023 |
8. Accessories and Package Contents
The Xhorse Key Tool Max Pro package includes the following items:
- 1x Xhorse Key Tool Max Pro Device
- 1x OBD to DB15 Cable with Light
- 1x Remote Programming Cable
- 1x Leakage Detection Cable
- 1x USB snúru
- 1x Notendahandbók
- 1x Certificate of Quality
- 1x Carrying Case (Package)
- (Note: Super Chips and Super Remotes are typically sold separately or in specific bundles.)
Figure 8: Included accessories and package contents.
9. Ábyrgð og stuðningur
Xhorse provides technical support for its products.
9.1 Online Technical Support
For any technical issues or questions, you can access live and free technical support through the 'Customer service' section on the Xhorse APP. A professional and dedicated team is available to assist you.
9.2 Upplýsingar um ábyrgð
Please refer to the warranty card included in your product package or visit the official Xhorse webvefsíðunni til að fá ítarlegri ábyrgðarskilmála. Geymið kaupkvittunina sem sönnun fyrir kaupum vegna ábyrgðarkröfu.
