YuanLey 8 porta 2.5G óstýrður skjáborðs Ethernet rofi með 10G SFP notendahandbók

1. Inngangur

This manual provides detailed instructions for the installation, operation, and maintenance of your YuanLey 8 Port 2.5G Unmanaged Desktop Ethernet Switch with 10G SFP. Please read this manual thoroughly before using the device to ensure proper functionality and to prevent damage.

2. Innihald pakka

Staðfestu að pakkinn þinn inniheldur eftirfarandi hluti:

• 1 x YuanLey 8 Port 2.5G Ethernet Switch
• 1 x rafmagnsleiðsla
• 1 x Notendahandbók

3. Vörueiginleikar

• 9 tengistillingar: Includes 8 x 2.5 Gigabit Ethernet ports and 1 x 10G SFP+ Port.
• Háhraða árangur: Delivers 2.5 times faster network performance than traditional Gigabit switches, with a switching capacity of up to 60Gbps.
• Plug and Play: Unmanaged design requires no configuration for immediate use.
• Endingargott og hljóðlátt: Features a metal case with 6KV lightning protection and a fanless design for silent operation.
• Breitt vinnsluhitastig: Virkar áreiðanlega við hitastig frá -10°C til 50°C.
• Fjölhæf staðsetning: Supports both wall mount and desktop placement.

4. Vöru lokiðview

Figure 4.1: YuanLey 8 Port 2.5G Unmanaged Desktop Ethernet Switch

Mynd 4.2: Framhlið yfirview with Ports and Indicators

The switch features 8 RJ45 ports supporting 10/100/1000Mbps/2.5G adaptive speeds and 1 SFP+ port for 1G/2.5G/10G fiber connections. LED indicators provide status for power and link activity.

Mynd 4.3: Aftari spjaldið yfirview með aflgjafainntaki

Mynd 4.4: Ítarleg View of Ports and Indicators

The rear panel includes the DC 12V/1.0A power input port and a grounding screw for electrical safety. The front panel LEDs indicate power status, 2.5Gbps link speed (orange), and 100/1000Mbps link speed (green) for RJ45 ports, and link status for the SFP+ port.

5. Uppsetning

Follow these steps to set up your YuanLey Ethernet Switch:

1. Tengdu rafmagn: Plug the provided power adapter into the DC 12V/1.0A input port on the rear of the switch, then plug the adapter into a power outlet. The PWR LED on the front panel will illuminate green.
2. Tengja Ethernet tæki: Connect your network devices (e.g., computers, NAS, WiFi 6 APs, gaming PCs) to the 2.5G Base-T ports (1-8) using standard Ethernet cables (Cat5e or higher recommended for 2.5G speeds). The corresponding port LEDs will light up to indicate a successful connection and speed.
3. Connect SFP+ Module (Optional): If using the 10G SFP+ port, insert a compatible 1G/2.5G/10G SFP/SFP+ module (not included) into the SFP+ slot. Then, connect a fiber optic cable or DAC cable to the module. The SFP indicator LED will light up when a link is established.

Figure 5.1: Typical Network Setup with the YuanLey Switch

6. Notkun rofans

The YuanLey 2.5G Unmanaged Ethernet Switch is designed for simple plug-and-play operation. Once powered on and connected to your network devices, it will automatically detect the link speed and establish connections without any further configuration.

• LED Vísar: Observe the PWR, L1-L8, and SFP+ Link LEDs to monitor the switch's status and network activity.
• Sjálfvirk MDI/MDIX: The switch supports Auto MDI/MDIX, eliminating the need for crossover cables.
• Adaptive Speed: RJ45 ports automatically adapt to 10/100/1000Mbps or 2.5Gbps.

7. Viðhald

To ensure optimal performance and longevity of your switch, consider the following maintenance guidelines:

• Staðsetning: Place the switch in a well-ventilated area, away from direct sunlight, heat sources, and excessive moisture. The fanless design relies on natural convection for cooling.
• Þrif: Hreinsið reglulega ytra byrði rofans með mjúkum, þurrum klút. Forðist að nota fljótandi hreinsiefni eða úðabrúsa.
• Kapalstjórnun: Gakktu úr skugga um að netsnúrurnar séu snyrtilega skipulagðar og ekki of beygðar eða teygðar.
• Aflgjafi: Use only the original power adapter provided with the switch.

Figure 7.1: Fanless Design and Environmental Considerations

8. Bilanagreining

Ef þú lendir í vandræðum með rofann þinn skaltu skoða eftirfarandi algeng vandamál og lausnir:

• Enginn kraftur:
  • Gakktu úr skugga um að rafmagnsmillistykkið sé vel tengd við rofann og virkan rafmagnsinnstungu.
  • Check if the PWR LED is illuminated. If not, try a different power outlet.
• Engin tenging/virkni á höfn:
  • Gakktu úr skugga um að Ethernet-snúran sé vel tengd bæði við rofatengið og nettækið.
  • Prófaðu aðra Ethernet snúru.
  • Gakktu úr skugga um að tengt tæki sé kveikt á og virki rétt.
  • Check the LED indicator for the specific port. If it's off, there might be no link.
• Hægur nethraði:
  • Ensure all devices in the network path (NICs, cables, routers) support 2.5G speeds to achieve maximum performance.
  • Use Cat5e or higher-rated Ethernet cables for 2.5G connections.
  • Check the color of the port LED: Orange indicates 2.5Gbps, Green indicates 100/1000Mbps.
• SFP+ Port Issues:
  • Ensure the SFP/SFP+ module is correctly inserted and compatible with the switch.
  • Verify the fiber optic or DAC cable is properly connected and undamaged.
  • Check the SFP indicator LED for link status.

9. Tæknilýsing

Mynd 9.1: Vöruvíddir

10. Ábyrgð og stuðningur

YuanLey products are designed for reliability and performance. For warranty information and technical support, please refer to the official YuanLey webvefsíðu eða hafðu samband við þjónustuver þeirra beint. Geymdu kaupkvittunina vegna ábyrgðarkröfu.

Til að fá frekari aðstoð getur þú heimsótt YuanLey Store on Amazon.