1. Inngangur
This manual provides essential information for the safe and efficient installation, operation, and maintenance of the AKO AKO-15692 Three-Phase PROPlus Basic Electronic Control Panel with Defrost 10200W. Please read this manual thoroughly before installation and operation.
Mynd 1: Framan view of the AKO AKO-15692 control panel. This image displays the front of the AKO AKO-15692 control panel. On the left, a digital display shows '-19.4' with 'ECO' and defrost indicators. Below the display are navigation buttons (up, down, set, escape, power, question mark, light). The right side features a transparent hinged cover, revealing internal circuit breakers and a rotary switch.
2. Öryggisupplýsingar
Fylgið alltaf eftirfarandi öryggisráðstöfunum til að koma í veg fyrir meiðsli og skemmdir á tækinu:
- Uppsetning og viðhald má aðeins framkvæma af hæfu starfsfólki.
- Disconnect power before performing any work on the control panel.
- Gakktu úr skugga um rétta jarðtengingu til að koma í veg fyrir raflost.
- Do not expose the unit to moisture or extreme temperatures outside its operating range.
- Gakktu úr skugga um að allar tengingar séu öruggar og í lagi áður en rafmagn er sett á.
3. Vöru lokiðview
The AKO-15692 is a three-phase electronic control panel designed for refrigeration systems requiring defrost management. It integrates control, protection, and monitoring functions for optimal performance and energy efficiency.
Helstu eiginleikar:
- Three-phase power compatibility (up to 10200W).
- Integrated defrost control.
- Digital display for temperature and status.
- User-friendly control interface.
- Robust enclosure for industrial environments.
4. Uppsetning og uppsetning
4.1 Upptaka
Carefully unpack the control panel and inspect it for any signs of damage. Retain the packaging materials for future transport or storage.
4.2 Uppsetning
The unit is designed for screw-mounted installation. Choose a dry, well-ventilated location away from direct heat sources or excessive vibration. Ensure sufficient space for wiring and ventilation.
- Mark the mounting points on the wall using the panel's dimensions.
- Drill appropriate holes and insert wall plugs if necessary.
- Secure the control panel to the wall using suitable screws.
4.3 Raftengingar
All electrical connections must comply with local and national electrical codes. Refer to the wiring diagram provided inside the panel cover for specific connections.
- Aflgjafi: Connect the three-phase power supply to the designated terminals.
- Þjappa: Connect the compressor load to the appropriate output terminals.
- Defrost Heaters: Connect defrost heaters to their dedicated output terminals.
- Skynjarar: Connect temperature sensors to the specified input terminals.
- Jarðtenging: Ensure all grounding connections are properly made.
Warning: Incorrect wiring can lead to severe damage or electrical shock. Consult a qualified electrician if unsure.
5. Notkunarleiðbeiningar
5.1 Kveikt/slökkt
Ýttu á ⏻ (Power) button to turn the unit on or off. The digital display will illuminate upon power-on.
5.2 Skjár og leiðsögn
The digital display shows the current temperature or system status. Use the following buttons for navigation and settings:
- SETJA: Enter/confirm settings.
- ▲ (Up): Increase values or navigate up.
- ▼ (Down): Decrease values or navigate down.
- ESC: Exit menu or cancel operation.
- ?: Access help or information.
- ☀︎ (Light): Control internal light (if applicable) or display brightness.
5.3 Stilla hitastig
- Ýttu á SETJA button. The current setpoint will flash.
- Notaðu ▲ or ▼ hnappa til að stilla viðeigandi hitastig.
- Ýttu á SETJA aftur til að staðfesta nýja stillingarpunktinn.
5.4 Afþíðingarferill
The unit features automatic defrost control. Parameters such as defrost interval and duration can be configured through the settings menu. Consult the detailed programming section in the full manual for advanced configurations.
6. Viðhald
Regular maintenance ensures optimal performance and longevity of the control panel.
6.1 Þrif
- Taktu úr sambandi áður en þú þrífur.
- Þurrkaðu að utan með mjúku, damp klút. Ekki nota slípiefni eða leysiefni.
- Gætið þess að raki komist ekki inn í innri íhlutina.
6.2 skoðanir
Skoðaðu reglulega eftirfarandi:
- Raflögn: Athugið hvort vírar séu lausir eða skemmdir.
- Flugstöðvar: Gakktu úr skugga um að allar tengiklemmur séu þéttar.
- Hýsing: Look for any signs of physical damage or corrosion.
- Loftræsting: Gakktu úr skugga um að loftræstiop séu hrein og óstífluð.
7. Bilanagreining
This section addresses common issues. For more complex problems, contact technical support.
| Vandamál | Möguleg orsök | Lausn |
|---|---|---|
| Spjaldið kviknar ekki. | No power supply; Blown fuse/tripped breaker. | Check main power supply; Inspect fuses/breakers and reset if necessary. |
| Rangt hitastigsmæling. | Faulty sensor; Sensor incorrectly placed. | Check sensor connections; Verify sensor placement; Replace sensor if faulty. |
| Defrost not initiating. | Incorrect defrost settings; Defrost heater fault. | Review defrost parameters in settings; Check defrost heater and wiring. |
8. Tæknilýsing
| Eiginleiki | Smáatriði |
|---|---|
| Fyrirmynd | AKO-15692 |
| Vörumerki | AKO |
| Power einkunn | 10200W |
| Áfangi | Þriggja fasa |
| Gerð uppsetningar | Skrúfað |
| Upptíðaraðgerð | Innbyggt |
9. Ábyrgð og stuðningur
9.1 Upplýsingar um ábyrgð
AKO products are covered by a standard manufacturer's warranty. Please refer to the warranty card included with your purchase or visit the official AKO websíðu fyrir nákvæma skilmála.
9.2 Tæknileg aðstoð
For technical assistance, spare parts, or service inquiries, please contact AKO customer support. Have your model number (AKO-15692) and purchase date ready when contacting support.
Contact information (e.g., phone, email, website) can typically be found on the product packaging or the official AKO websíða.
