IKIER K1 Pro Max 48W Laser Engraver with R2 Rotary Module User Manual

1. Inngangur

The IKIER K1 Pro Max is an advanced laser engraving and cutting machine designed for precision and efficiency. Featuring a powerful 48W laser module, it offers high-speed operation up to 900 mm/s and includes innovative functionalities such as automatic focus, continuous engraving, and a robust cooling system. This manual provides essential information for the safe and effective use of your device.

2. Öryggisupplýsingar

WARNING: Laser radiation can be dangerous. Always wear appropriate laser safety glasses when operating the machine. Never look directly into the laser beam. Ensure proper ventilation during operation.

• Augnvernd: Always wear certified laser safety glasses to protect your eyes from direct or reflected laser light.
• Loftræsting: Operate the machine in a well-ventilated area to dissipate fumes and smoke produced during engraving or cutting.
• Eftirlit: Skildu aldrei vélina eftir eftirlitslausa meðan á notkun stendur.
• Eldfimt efni: Avoid placing flammable materials near the laser path.
• Neyðarstopp: Familiarize yourself with the emergency stop button location.

Samþættir öryggiseiginleikar:

• Hallagreining: The machine automatically stops if tilted more than 15 degrees, preventing unintended laser operation.
• Logagreining: An integrated sensor detects open flames directly below the laser module, triggering an alarm and returning the module to its origin.
• Öryggislás: A physical key lock prevents unauthorized use.
• Omnidirectional Limit Switch: Ensures the laser module operates within safe boundaries.

Mynd 1: Yfirview of IKIER K1 Pro Max Safety Protections and Working Modes.

Figure 2: Flame Detection in action, showing the laser module detecting an open flame.

3. Uppsetning

The IKIER K1 Pro Max is designed for easy setup, with most components pre-assembled. Follow these general steps for initial setup:

1. Unbox: Fjarlægið alla íhluti varlega úr umbúðunum. Gakktu úr skugga um að allir hlutar sem taldir eru upp á pakklistanum séu til staðar.
2. Samsetning: Attach the X-axis to the main frame. Ensure all connections are secure.
3. Rafmagnstenging: Tengdu rafmagnsmillistykkið við vélina og viðeigandi rafmagnsinnstungu.
4. Gagnatenging: Connect the machine to your computer via USB or prepare for offline operation using a USB drive.

Figure 3: IKIER K1 Pro Max Laser Engraver with included accessories.

4. Notkunarleiðbeiningar

4.1 Power Modes (48W/24W)

The IKIER K1 Pro Max features a switchable laser power module, allowing you to optimize performance for different tasks:

• 48W ham: Ideal for powerful cutting tasks, providing maximum laser intensity.
• 24W ham: Suitable for fine engraving, offering a smaller laser spot for delicate work.

A dedicated button on the laser module allows for easy switching between these modes.

Figure 4: Switchable Power Mode illustration with varying laser spot sizes.

Figure 5: Comparison of Engraving Mode (24W) and Cutting Mode (48W).

4.2 Autofocus & Auto Air Assist

The K1 Pro Max is equipped with an electric lift for automatic focusing and integrated auto air assist:

• Sjálfvirkur fókus: The electric lift automatically adjusts the laser module height to achieve optimal focus with a single touch, ensuring precision and efficiency.
• Auto Air Assist: Automatically controls airflow during cutting, improving cut quality and reducing charring.

Figure 6: Autofocus and Auto Air Assist features.

4.3 Continuous Engraving

This feature allows the machine to resume an engraving task after an unexpected interruption, such as a power outage. To use this function, save your project files to a USB drive and connect it to the machine's 4.3-inch touchscreen for offline operation. Ensure the 'Auto-home startup' setting is turned off in your software (e.g., LightBurn) to prevent interference with this function.

4.4 Auxiliary Positioning

The auxiliary positioning feature uses a red cross laser to indicate the precise focus position of the laser, aiding in accurate material placement and job setup. This is particularly useful for ensuring your design is placed exactly where intended on your material.

4.5 Sinking Cutting

Sinking cutting allows for deeper cuts by performing multiple passes, gradually lowering the laser module. This is effective for thicker materials. The fixed focus distance of the laser module is 8mm. When setting the 'Number of Passes' and 'Z step per pass' in your software, ensure that 'Number of Passes * Z step per pass' is less than 8mm to avoid triggering the limit switch.

Figure 7: Sinking Cutting capability on thick wood.

4.6 Kælikerfi

The K1 Pro Max incorporates a super cooling system to maintain optimal performance and extend the lifespan of the laser module. It features an innovative dual air duct design with four high-quality copper tubes for thermal conduction, two rows of large fins, and a high-power fan for maximum heat dissipation.

Mynd 8: Innri view of the laser module's heat dissipation system.

4.7 Vinnustillingar

The machine offers three distinct working modes to suit various project requirements:

• High-speed Mode: For rapid engraving and cutting, reaching speeds up to 900 mm/s.
• Jafnvægisstilling: The universal default mode, offering a good balance between speed and precision.
• High-precision Mode: For intricate details and superior accuracy in engraving.

4.8 Hugbúnaðarsamhæfi

The IKIER K1 Pro Max is compatible with popular laser control software such as LightBurn and LaserGRBL. Refer to the software's documentation for detailed instructions on creating and executing laser projects.

5. Viðhald

Regular maintenance ensures the longevity and optimal performance of your laser engraver:

• Hreinsið leysilinsuna: Periodically clean the laser lens with a soft, lint-free cloth and appropriate lens cleaning solution.
• Smyrðu hreyfanlega hluta: Apply a small amount of lubricant to the linear rails and lead screws to ensure smooth movement.
• Athugaðu tengingar: Regularly inspect all electrical and data connections for tightness and wear.
• Haltu svæði hreinu: Ensure the work area is free of dust and debris, which can affect machine performance.

6. Bilanagreining

If you encounter issues with your IKIER K1 Pro Max, consider the following common troubleshooting steps:

• Vél kveikir ekki á: Check all power connections and ensure the power switch is in the 'On' position. Verify the power outlet is functional.
• Leysirinn kveikir ekki: Ensure the security key is inserted and turned to the 'On' position. Check software settings for laser power and speed.
• Engraving Deviation: Ensure the material is securely fixed and the machine is stable. Check for any loose belts or mechanical components.
• Tilt Detection Alarm: If the machine prompts 'The machine is tilted', place it on a flat, stable surface and tap 'OK' on the screen to dismiss the alarm.
• Flame Detection Alarm: If 'Flame detected' appears, ensure there is no open flame near the laser module. Restart the machine if necessary after clearing the area.
• Vandamál með sjálfvirkan fókus: Ensure the laser module can physically touch the object within its effective stroke. Keep a distance of at least 5mm between the laser slider and the base.

For more detailed troubleshooting or persistent issues, please refer to the official IKIER support resources.

7. Tæknilýsing

8. Ábyrgð og stuðningur

IKIER is committed to providing quality products and customer satisfaction.

• Skilareglur: Varan er gjaldgeng fyrir endurgreiðslu eða skipti innan 31 daga frá kaupum.
• Þjónustudeild: For technical assistance, troubleshooting, or warranty inquiries, please visit the official IKIER website or utilize their online chat support for quick responses.