phrozen Sonic Mega 8K S LCD/MSLA Resin 3D prentara notendahandbók

1. Inngangur

Velkomin(n) í notendahandbókina fyrir nýja tækið þitt phrozen Sonic Mega 8K S LCD/MSLA Resin 3D Printer. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your printer to ensure optimal performance and longevity. Please read this manual thoroughly before operating the device.

2. Öryggisupplýsingar

Öryggi þitt er í fyrirrúmi. Vinsamlegast fylgið eftirfarandi öryggisleiðbeiningum:

• Always operate the printer in a well-ventilated area to avoid inhaling resin fumes.
• Wear appropriate personal protective equipment (PPE), including nitrile gloves og öryggisgleraugu, when handling liquid resin or uncured prints.
• Avoid direct skin and eye contact with liquid resin. In case of contact, wash immediately with soap and water. Seek medical attention if irritation persists or if resin gets into eyes.
• Keep resin away from direct sunlight and heat sources. Store it in a cool, dark place in its original sealed container.
• Do not dispose of liquid resin down drains. Cure any waste resin under UV light before disposing of it as solid waste according to local regulations.
• Gakktu úr skugga um að prentarinn sé staðsettur á stöðugu og sléttu yfirborði.
• Ekki snerta hreyfanlega hluta meðan á notkun stendur.
• Aftengdu prentarann ​​úr rafmagnsinnstungunni áður en viðhald eða þrif eru framkvæmd.

3. Innihald pakka

Þegar þú tekur kassann úr kassanum skaltu ganga úr skugga um að allir eftirfarandi hlutir séu með:

• phrozen Sonic Mega 8K S 3D Printer
• Byggðu disk
• Resin Vat
• Rafmagnsbreytir og kapall
• USB Drive (with user manual and test files)
• Gloves (as listed in "whats_in_the_box")
• Plastskrapa
• Málmskrapa
• Trekt
• Spare FEP Film
• Tool Kit (Allen wrenches, screws)

4. Vöru lokiðview

The phrozen Sonic Mega 8K S is a high-resolution LCD/MSLA resin 3D printer designed for rapid production and intricate detail. It features a large 15-inch monochrome LCD screen and a spacious build volume, making it ideal for printing multiple models or large-scale projects.

Helstu eiginleikar:

• Unparalleled Productivity: High-speed system and large build plate allow for efficient batch printing, such as 80 detailed 1/32 scale models in under 1.5 hours.
• Revolutionary Production Efficiency: Combined with advanced ACF film and potent TR300 Resin, achieve speeds up to ten times faster than mid-size printers.
• Streamlined Convenience with Lift-Up Lid: The ingenious lift-up lid design optimizes space utilization and provides easy access to prints.
• Efficient Resin Management: A built-in metal drip hanger helps preserve resin post-printing and ensures safety during build plate cleaning.
• Exquisite 8K Printing Precision: Achieve extraordinary levels of intricacy with 8K resolution, capturing every nuance without compromising efficiency.

Figure 4.1: Phrozen Sonic Mega 8K S 3D Printer with a large printed model.

Figure 4.2: Key features of the Phrozen Sonic Mega 8K S.

Figure 4.3: Mass production capability with the 15-inch building plate.

Figure 4.4: Comparison of specifications between Sonic Mega 8K S and Sonic Mighty 8K.

Opinbert vörumyndband:

Myndband 4.1: Opinberri vöru lokiðview of the phrozen Sonic Mega 8K S, showcasineiginleika þess og getu.

5. Uppsetning

Fylgdu þessum skrefum til að setja upp prentarann ​​í upphafi:

1. Unbox: Carefully remove the printer and all accessories from the packaging. Inspect for any damage during transit.
2. Staðsetning: Place the printer on a stable, level surface in a well-ventilated area, away from direct sunlight and heat.
3. Rafmagnstenging: Connect the power adapter to the printer and then to a suitable power outlet. Do not power on yet.
4. Settu upp byggingarplötu: Secure the build plate onto the Z-axis arm. Ensure it is firmly attached.
5. Setja upp plastefnisvatn: Place the resin vat onto the LCD screen platform. Ensure it is seated correctly and securely.
6. Z-Axis Calibration (Leveling):
   • Losaðu skrúfurnar á byggingarplötunni.
   • Place a sheet of A4 paper (or the calibration card provided) on the LCD screen.
   • Lower the build plate until it firmly presses against the paper.
   • Tighten the build plate screws while maintaining pressure.
   • Raise the build plate slightly and remove the paper.
   • Confirm the Z-axis home position through the printer's touchscreen menu.
7. Hleðsla á plastefni: Once leveled, carefully pour the desired resin into the resin vat, ensuring it does not exceed the maximum fill line.

6. Notkunarleiðbeiningar

To begin printing, follow these general steps:

1. Prepare 3D Model: Use a compatible slicing software (e.g., Chitubox, Lychee Slicer) to prepare your 3D model. This involves adding supports, orienting the model, and setting print parameters (layer height, exposure time, lift speed, etc.) according to your resin and desired print quality.
2. Slice Model: Slice the prepared model into layers and save it as a `.ctb` or compatible file format onto the provided USB drive.
3. Settu inn USB-lykil: Settu USB-drifið í USB-tengi prentarans.
4. Select and Start Print: Á snertiskjá prentarans skaltu fara í valmyndina „Prenta“ og velja file, and confirm to start the printing process.
5. Monitor Print: Observe the first few layers to ensure proper adhesion to the build plate. The printer will automatically proceed with the print.
6. Eftirvinnsla: Once printing is complete, carefully remove the build plate. Use the metal scraper to detach the print from the build plate. Place the build plate on the drip hanger to allow excess resin to drip back into the vat.
7. Wash and Cure: Wash the uncured print in isopropyl alcohol (IPA) or a dedicated resin cleaner to remove excess liquid resin. After washing, cure the print under UV light (e.g., in a UV curing station) to fully harden it.

7. Viðhald

Regular maintenance ensures consistent print quality and extends the life of your printer:

• Hreinsa byggingarplötu: After each print, clean the build plate with IPA and a soft cloth.
• Hreint plastefnisvatn: If changing resin colors or if there are cured resin bits in the vat, carefully empty the resin into a separate container (filter if necessary) and clean the vat with IPA and a soft cloth. Inspect the FEP film for damage.
• Inspect FEP Film: Regularly check the FEP film at the bottom of the resin vat for scratches, dents, or cloudiness. Replace it if damaged to prevent print failures and protect the LCD screen.
• Clean LCD Screen: If resin spills onto the LCD screen, immediately clean it with a soft, lint-free cloth and IPA. Avoid using sharp objects or abrasive materials.
• Lubricate Z-Axis: Berið reglulega lítið magn af litíumsmjöri á leiðarskrúfu Z-ássins til að tryggja mjúka hreyfingu.
• Uppfærsla vélbúnaðar: Check the official phrozen websíðuna fyrir allar tiltækar uppfærslur á vélbúnaði til að bæta afköst og bæta við nýjum eiginleikum.

8. Bilanagreining

Hér eru nokkur algeng vandamál og mögulegar lausnir á þeim:

9. Tæknilýsing

10. Ábyrgð og stuðningur

For detailed warranty information and technical support, please refer to the official phrozen webvefsíða eða alhliða Notendahandbók (PDF) provided with your printer. You may also contact Phrozen 3D Printer customer support for assistance.

The product is sold by Phrozen 3D Printer and is fulfilled by Amazon. It typically comes with a 30-day easy return policy.