aigo AC SE 360 Water Cooler Instruction Manual

Inngangur

This manual provides detailed instructions for the installation, operation, and maintenance of your aigo AC SE 360 All-in-One (AIO) Liquid CPU Cooler. Please read this manual thoroughly before installation to ensure proper setup and optimal performance.

Öryggisupplýsingar

• Gakktu úr skugga um að tölvan sé slökkt og úr sambandi við innstunguna áður en hún er sett upp.
• Farið varlega með íhluti til að forðast skemmdir.
• Refer to your motherboard manual for specific CPU socket and fan header locations.
• Do not attempt to open the pump or radiator as this may void the warranty and cause leaks.
• Geymið þar sem börn ná ekki til.

Innihald pakka

Gakktu úr skugga um að allir íhlutir séu til staðar áður en uppsetning hefst.

• aigo AC SE 360 Radiator with Integrated Pump/Water Block
• 3 x 120 mm kæliviftur
• Mounting Hardware for Intel Sockets (LGA 2066/2011-V3/2011/1700/1366/1200/115X)
• Mounting Hardware for AMD Sockets (FM1/FM2/FM2+/AM2/AM2+/AM3/AM3+/AM4)
• Hitapasta (fyrirfram borin á eða í túpu)
• Viftuskrúfur og ofnskrúfur
• Notendahandbók (þetta skjal)

Tæknilýsing

Uppsetning og uppsetning

This section guides you through the installation process of the aigo AC SE 360 liquid cooler. Ensure your system is powered off and unplugged before proceeding.

1. Prepare the Radiator and Fans

Attach the three 120mm fans to the radiator using the provided long screws. Ensure the fan airflow direction is appropriate for your case's cooling strategy (typically pushing air through the radiator and out of the case, or pulling air in).

Mynd: Ofan frá og niður view of the radiator with fans installed. This shows the orientation of the fans on the radiator.

Mynd: Hallandi aftan view of the assembled cooler, highlighting the fans and radiator structure.

2. Install the Radiator in the PC Case

Mount the assembled radiator and fan unit into your PC case. Common mounting locations include the top or front of the case. Use the shorter screws provided to secure the radiator to the case's fan mounts. Ensure there is adequate clearance for the tubes and other components.

Image: Detail of the radiator fins and mounting points, useful for understanding case installation.

3. Undirbúið örgjörvainntakið

Select the appropriate mounting bracket for your CPU socket (Intel or AMD). Attach the backplate (if required for your socket type) to the rear of the motherboard. Install the standoffs onto the motherboard around the CPU socket.

4. Install the Water Block/Pump

Ensure the CPU surface is clean. If thermal paste is not pre-applied to the water block, apply a small pea-sized amount to the center of your CPU's integrated heat spreader (IHS). Carefully place the water block onto the CPU, aligning it with the standoffs. Secure the water block with the provided thumb screws or nuts, tightening them in a diagonal pattern until snug. Do not overtighten.

Mynd: Hlið view of the pump/water block, illustrating its compact design.

Mynd: Hornlaga view of the complete cooler assembly, showing the connection between the pump and radiator.

5. Tengdu snúrur

• Connect the pump's power cable to a dedicated AIO_PUMP or CPU_FAN header on your motherboard. Consult your motherboard manual for the correct header.
• Connect the fan cables to the CPU_FAN header or a dedicated fan controller/hub. If your fans have RGB lighting, connect the RGB cables to a compatible RGB header on your motherboard or an RGB controller.
• Ensure all cables are routed neatly and do not interfere with other components or airflow.

Mynd: Framan view of the cooler with RGB lighting, demonstrating the aesthetic appearance after installation and power connection.

Notkunarleiðbeiningar

Once installed, the aigo AC SE 360 operates automatically. The pump and fans will adjust their speed based on CPU temperature, managed by your motherboard's BIOS/UEFI settings or dedicated software.

• Upphafleg kveikt á: After installation, power on your computer. Monitor CPU temperatures using system monitoring software to ensure proper function.
• BIOS/UEFI stillingar: Access your motherboard's BIOS/UEFI to verify that the CPU_FAN header (or AIO_PUMP header) is set to PWM mode and that fan curves are configured for optimal cooling and noise levels.
• RGB stjórn: If your motherboard supports RGB synchronization, use its software to customize the lighting effects of the fans and pump.

Viðhald

Reglulegt viðhald hjálpar til við að tryggja langlífi og bestu mögulegu afköst vökvakælisins.

• Rykhreinsun: Periodically clean dust from the radiator fins and fan blades using compressed air or a soft brush. Dust accumulation can impede airflow and reduce cooling efficiency.
• Skoðun á rörum: Occasionally inspect the tubes for any signs of kinks, leaks, or damage.
• Viftuathugun: Ensure all fans are spinning freely and quietly. If a fan becomes noisy or stops spinning, it may need replacement.
• Dæluathugun: Listen for any unusual noises from the pump. A constant, low hum is normal, but grinding or gurgling sounds may indicate an issue.

Úrræðaleit

Ábyrgð og stuðningur

aigo products are designed for reliability and performance. For warranty information, technical support, or replacement parts, please refer to the official aigo websíðuna eða hafðu samband við söluaðilann þinn.

Opinber Websíða: www.aigo.com (Athugið: Þetta er staðgengill URL. Please refer to your product packaging or official documentation for the correct support websíða.)

Please have your product model number (ACSE360-WH) and purchase date ready when contacting support.