Herdio SZJW-4-61BT

Herdio 4 Inch 240W Marine Bluetooth Speakers

Model: SZJW-4-61BT

Vara lokiðview

The Herdio 4 Inch 240W Marine Bluetooth Speakers are designed for outdoor environments, offering robust sound and waterproof durability. This system includes four 4-inch 2-way full-range speakers and a Bluetooth amplifier, suitable for various vehicles and outdoor settings.

Key features include Bluetooth 5.0 connectivity, IP66 waterproof rating, and a compact design for versatile mounting. The system provides a maximum output power of 240 Watts (60 Watts per speaker) with a frequency response of 80Hz-20kHz and 4 Ohms impedance.

Hvað er í kassanum

  • 4 x Marine Speakers with Mounting Brackets
  • 1 x Bluetooth Amplifier (4-channel)
  • 1 x 12V DC Power Cable
  • 1 x Set of Bolts and Screws
Contents of the Herdio speaker package, showing four black speakers, a black amplifier, a power cable, and mounting hardware.
Figure 1: Package contents including speakers, amplifier, power cable, and mounting accessories.

Tæknilýsing

EiginleikiSmáatriði
Nafn líkansSZJW-4-61BT
Tegund hátalaraOutdoor, Marine
Stærð hátalara4 tommur
Hámarks úttaksafl240 Watts (60W per speaker)
Tíðni svörun80Hz-20kHz
Viðnám4 ohm
TengitækniBluetooth 5.0
Bluetooth sviðAllt að 20 metra (65.6 fet)
VatnsþolsstigIP66 vatnsheldur
EfniABS plast
Vörumál4.3"D x 4.3"B x 4.3"H (á hvern hátalara)
Þyngd hlutar2.92 kíló (6.43 pund)
Diagram showing the dimensions of a single Herdio 4-inch speaker, measuring 4.3 inches in depth, width, and height.
Figure 2: Product dimensions of the Herdio speaker.

Uppsetning og uppsetning

Follow these steps to install and connect your Herdio Marine Bluetooth Speakers:

  1. Hátalarafesting:
    The speakers come with adjustable mounting brackets. Loosen the knobs on the sides of each speaker to remove the bracket. Secure the bracket to your desired surface using the provided screws. Once the bracket is fixed, place the speaker back into the bracket and tighten the knobs to secure it. The bracket allows for 180-degree rotation for optimal sound direction.
  2. Speaker Wiring to Amplíflegri:
    Use a small screwdriver to loosen the terminals on the amplifier. Connect the speaker cables to the amplifier terminals. Ensure that the white wire (positive) and black wire (negative) from each speaker are connected to the corresponding L+ (Left Positive), L- (Left Negative), R+ (Right Positive), and R- (Right Negative) terminals on the amplíflegri. The amplifier supports 4 channels.
  3. Aflgjafatenging:
    Connect the provided 12V DC power cable to the amplifier. The red wire from the power cable links to your 12V battery's positive terminal, and the black wire links to the negative terminal. Ensure a secure connection to prevent power interruptions.
  4. Bluetooth-parun:
    Þegar kveikt er á, amplifier's blue light will blink, indicating it is in pairing mode. On your device (smartphone, tablet, etc.), search for Bluetooth devices and select 'Herdio' to connect. A constant blue light on the amplifier indicates a successful connection.
Diagram illustrating how to connect the Herdio speakers and amplifier to a 12V power supply and pair with a Bluetooth device.
Figure 3: Connection diagram for the Herdio speaker system.
Close-up of the Herdio Bluetooth amplifier box, showing input and output terminals and control buttons.
Figure 4: Herdio Bluetooth Amplifier Box.

Video 1: This video demonstrates the unboxing, wiring, and Bluetooth pairing process for the Herdio 4 Inch 240W Marine Bluetooth Speakers. It provides a visual guide for connecting the speakers to the amplifier and establishing a Bluetooth connection with a mobile device.

Notkunarleiðbeiningar

The amplifier features several buttons for controlling playback and settings:

Skýringarmynd af amplifier control panel with numbered buttons and their functions.
Mynd 5: Amplifier Control Panel and Functions.
  1. Afl/Spila/Hlé hnappur:
    Long press (3 seconds) to power on/off. Short press to play or pause music.
  2. Hnappur fyrir ham:
    Long press (3 seconds) to restore factory settings. Short press to switch between Bluetooth (BT), USB, AUX, and MIC modes.
  3. Volume Down/TWS Button:
    Long press (3 seconds) to enter/exit TWS (True Wireless Stereo) mode. Short press to decrease the volume.
  4. Volume Up/Mono Button:
    Long press (3 seconds) to switch between stereo and mono sound output. Short press to increase the volume.
  5. Hnappur fyrir fyrra lag/spóla til baka:
    Long press (3 seconds) for fast rewind. Short press to go to the previous song.
  6. Hnappur fyrir næsta lag/spólun áfram:
    Long press (3 seconds) for fast forward. Short press to go to the next song.

Viðhald

To ensure the longevity and optimal performance of your Herdio Marine Bluetooth Speakers, follow these maintenance guidelines:

  • Þrif: Regularly wipe the speakers with a soft, damp cloth to remove dirt and salt residue. Avoid using harsh chemicals or abrasive cleaners.
  • Vatnsútsetning: While the speakers are IP66 waterproof, prolonged submersion is not recommended. Ensure all connections are secure to maintain water resistance.
  • Geymsla: When not in use for extended periods, store the speakers in a dry, cool place away from direct sunlight and extreme temperatures.
  • Tengingarathuganir: Periodically inspect all wiring and connections for any signs of wear, corrosion, or looseness. Tighten connections as needed.

Úrræðaleit

If you encounter issues with your Herdio Marine Bluetooth Speakers, refer to the following common problems and solutions:

  • Enginn kraftur:
    - Ensure the 12V DC power cable is securely connected to both the amplifier and the power source (battery).
    - Check the power source for proper voltage and functionality.
  • Ekkert hljóð:
    - Verify that the speaker wires are correctly connected to the amplifier terminals (positive to positive, negative to negative).
    - Confirm that the ampKveikt er á lyftaranum og hljóðstyrkurinn hækkaður.
    - Check the audio source (Bluetooth device, USB, AUX) for proper playback and volume settings.
    - Ensure the amplifier is in the correct input mode (BT, USB, AUX, MIC).
  • Bluetooth tengist ekki:
    - Gakktu úr skugga um að amplifier is in Bluetooth mode (blue light blinking).
    - Ensure your device's Bluetooth is enabled and within the 20-meter range.
    - Try forgetting the device from your phone's Bluetooth settings and re-pairing.
    - Restart both the amplifer og Bluetooth tækið þitt.
  • Bjagað hljóð:
    - Reduce the volume on both the amplifer og hljóðgjafann þinn.
    - Check speaker wire connections for any loose or corroded contacts.
    - Ensure the speakers are not overloaded beyond their rated power.

Ábyrgð og stuðningur

The Herdio 4 Inch 240W Marine Bluetooth Speakers come with a Limited Warranty. For specific details regarding warranty coverage, terms, and conditions, please refer to the warranty information provided with your product packaging or contact Herdio customer support.

For technical assistance, troubleshooting beyond this manual, or inquiries about replacement parts, please visit the official Herdio websíðuna eða hafðu samband við þjónustudeild þeirra.

Tengd skjöl - SZJW-4-61BT

Preview Handbók fyrir notendur Herdio vatnsheldra innandyra og úti hátalara HOS-401 HOS-501 HOS-601
Þessi handbók veitir ítarlegar leiðbeiningar fyrir vatnsheldu innandyra/utandyra hátalarana Herdio HOS-401, HOS-501 og HOS-601, þar á meðal uppsetningu, raflögn, uppsetningu, forskriftir og ábyrgðarupplýsingar.
Preview Herdio Home Bluetooth loft-/vegghátalarar tvöfaldir Amplíflegri kerfislögn
Þetta skjal lýsir raflögnunarforritinu og Bluetooth-aðgerðum fyrir Herdio Home Bluetooth In loft-/vegghátalara, með tvöföldum amphátalarakerfi. Það veitir skref-fyrir-skref leiðbeiningar um tengingu hátalara, amprafmagnstöflur og straumbreytar, ásamt leiðbeiningum um pörun Bluetooth-tækja.
Preview Herdio hátalarar fyrir loft/vegg - handbók og uppsetningarleiðbeiningar
Þetta skjal inniheldur uppsetningarleiðbeiningar, tæknilegar upplýsingar og ábyrgðarupplýsingar fyrir hátalarakerfi Herdio fyrir innbyggða lofti og vegg, þar á meðal gerðir eins og HCS418, HCS528, HCS628 og HCS828, með og án Bluetooth-tengingar.
Preview Herdio HWA16BT In-Wall/Wall Mount Plate BT Audio Control AmpHandbók fyrir móttakarakerfi Lifier
Notendahandbók fyrir Herdio HWA16BT innbyggða/veggfestingarplötu BT hljóðstýringu AmpLifier móttakarakerfi, með ítarlegum upplýsingum um virkni, tengingu, upplýsingar og uppsetningarleiðbeiningar fyrir Bluetooth-pörun.
Preview Herdio HWA16BT/HWA18BT In-Wall Bluetooth Amplifier Receiver System - Owner's Manual
Owner's manual for the Herdio HWA16BT and HWA18BT in-wall Bluetooth amplifier receiver system. Provides detailed information on FCC requirements, product specifications, Bluetooth connectivity, setup instructions, functions, power connection, and compatibility.
Preview Herdio AMP-BTX01 Bluetooth Audio AmpLifier System Owner's Manual
Comprehensive owner's manual for the Herdio AMP-BTX01 Bluetooth Audio Amplifier System. Learn about product features, connection diagrams, operation guide, technical specifications, and warranty information.