eSkde CS58-S7 Petrol Chainsaw User Manual

1. Inngangur

This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your eSkde CS58-S7 Petrol Chainsaw. Please read this manual thoroughly before operating the chainsaw to ensure proper use and to prevent injury or damage.

2. Öryggisupplýsingar

Operating a chainsaw can be hazardous. Adhere to all safety warnings and instructions to minimize risks.

2.1 Persónulegur hlífðarbúnaður (PPE)

• Höfuðvörn: Notaðu öryggishjálm.
• Augnvernd: Notið öryggisgleraugu eða andlitshlíf.
• Heyrnarvörn: Notið eyrnahlífar eða eyrnatappa.
• Handvörn: Notið þunga vinnuhanska.
• Fótleggjavörn: Notið hlífðarbuxur eða -jakka fyrir keðjusög.
• Fótvernd: Notið öryggisskó með stáltá og góðu gripi.

2.2 Almennar öryggisráðstafanir

• Always inspect the chainsaw before each use for loose parts, damage, or fuel leaks.
• Ensure the chain brake is functional and engaged when starting or moving the saw.
• Haldið föstu gripi með báðum höndum á handföngum keðjusögarinnar.
• Keep the work area clear of bystanders, children, and pets.
• Be aware of kickback potential and use proper cutting techniques to avoid it.
• Handle fuel with extreme care. Mix and refuel in a well-ventilated area away from ignition sources.
• Ekki nota keðjusögina þegar þú ert þreyttur eða undir áhrifum áfengis eða lyfja.
• Store the chainsaw safely when not in use, with the bar cover in place.

3. Vöruhlutir

Familiarize yourself with the main components of your eSkde CS58-S7 Petrol Chainsaw.

3.1 Meðfylgjandi fylgihlutir

• 20" Guide Bar
• 2 x keðjur
• Verkfærasett
• Eldsneytisblöndunarflaska
• Geymslupoki
• Barkápa

4. Uppsetning og samsetning

4.1 Samsetning stangar og keðju

1. Gakktu úr skugga um að vélin sé slökkt og keðjubremsan sé aftengd.
2. Remove the side cover nuts and the side cover.
3. Place the guide bar onto the studs, ensuring the chain tensioner pin aligns with the hole in the bar.
4. Carefully fit the chain around the sprocket and into the groove of the guide bar. Ensure the cutting edges of the chain are facing the correct direction (refer to chain direction indicator on the bar).
5. Replace the side cover and hand-tighten the nuts. Do not fully tighten yet.
6. Adjust chain tension (see Section 5.2).

4.2 Fuel and Oil Preparation

The eSkde CS58-S7 uses a 2-stroke engine and requires a specific fuel mixture.

• Eldsneytisblanda: Mix unleaded petrol with high-quality 2-stroke engine oil at a ratio of 25:1 (Petrol:Oil). Use the provided fuel mixing bottle for accurate measurement.
• Eldsneytisgeta: The fuel tank capacity is 550ml.
• Keðjuolía: Fill the chain oil tank with good quality chain lubricant. The chain oil tank capacity is 260ml. This oil automatically lubricates the chain and bar during operation.

Mikilvægt: Never use pure petrol in the chainsaw. Incorrect fuel mixture will cause severe engine damage and void the warranty.

5. Notkunarleiðbeiningar

5.1 Ræsing á keðjusöginni

Cold Start Procedure:

1. Setjið keðjusögina á fast, slétt yfirborð.
2. Virkjaðu keðjubremsuna með því að ýta framhandarhlífinni fram.
3. Pull out the choke knob fully.
4. Ýttu nokkrum sinnum á grunnkúluna þar til eldsneyti sést í afturleiðslunni.
5. Pull the starter cord firmly and steadily until the engine fires briefly (usually 1-3 pulls).
6. Push the choke knob halfway in.
7. Togðu aftur í startsnúruna þar til vélin fer í gang og gengur.
8. Allow the engine to warm up for a few seconds, then disengage the chain brake by pulling the front hand guard back.

Warm Start Procedure:

1. Kveiktu á keðjubremsu.
2. Pull the starter cord firmly and steadily until the engine starts. No choke or priming is usually needed.
3. Disengage the chain brake once the engine is running smoothly.

5.2 Stilling keðjuspennu

Correct chain tension is crucial for safe and efficient operation. The chain should be snug against the guide bar, but still able to be pulled around by hand with light effort.

1. Loosen the side cover nuts slightly.
2. Use the tensioning screw (usually located on the side cover or near the bar studs) to adjust the chain tension. Turn clockwise to tighten, counter-clockwise to loosen.
3. Once tension is correct, fully tighten the side cover nuts.
4. Check tension again after a few cuts, as new chains can stretch.

5.3 Skurðartækni

Always maintain a stable footing and a firm grip on the chainsaw. Plan your cuts to avoid pinching the bar or chain.

• Felling: For felling trees, ensure the area is clear and plan the felling direction. Make a notch cut on the felling side, then a felling cut from the opposite side.
• Liming: Remove branches from a felled tree. Work from the base towards the top, supporting the branch if necessary to prevent pinching.
• Bucking: Cutting a felled log into shorter sections. Use a sawhorse or elevate the log to avoid cutting into the ground.

6. Viðhald

Reglulegt viðhald tryggir langlífi og örugga notkun keðjusögarinnar.

6.1 Daglegt viðhald

• Athugaðu keðjuspennu.
• Check chain sharpness. Sharpen or replace as needed.
• Hreinsaðu loftsíuna.
• Check the oil level in the chain oil tank.
• Inspect the guide bar for wear or burrs.
• Clean debris from the chain brake mechanism.

6.2 Reglubundið viðhald

• Kerti: Skoðið og hreinsið kertið reglulega. Skiptið um það ef það er slitið eða óhreint.
• Eldsneytissía: Check and clean or replace the fuel filter periodically.
• Carburettor Adjustment: If the engine runs poorly, the carburettor may need adjustment. This should ideally be done by a qualified technician.
• Almenn þrif: Keep the engine cooling fins and air intake clean to prevent overheating.

7. Bilanagreining

Þessi kafli fjallar um algeng vandamál sem þú gætir lent í með keðjusögina þína.

8. Tæknilýsing

9. Ábyrgð og stuðningur

For warranty information, please refer to the documentation provided with your purchase or contact eSkde customer support. Keep your proof of purchase for any warranty claims.

For technical assistance or spare parts, please contact your retailer or the eSkde customer service department. Provide your model number (CS58-S7) and purchase date when seeking support.