Inngangur
This manual provides essential information for the safe and effective operation of your Blackstar HT-5RH MK III 5-watt guitar tube amp head. Please read thoroughly before use.
Öryggisupplýsingar
Til að tryggja örugga notkun og koma í veg fyrir skemmdir skal fylgja eftirfarandi öryggisleiðbeiningum:
- Tryggðu alltaf amplifier is connected to a grounded power outlet.
- Ekki afhjúpa amphitari fyrir rigningu eða raka.
- Gakktu úr skugga um næga loftræstingu í kringum amplifier to prevent overheating. Do not obstruct ventilation grilles.
- Refer all servicing to qualified service personnel. Risk of electric shock. Do not open the amplifier undirvagn.
- Disconnect the mains power cable before cleaning or servicing.
Uppsetning
Follow these steps to set up your HT-5RH MK III amplyftarahaus.
Tenging við hátalaraskáp
The HT-5RH MK III requires an external speaker cabinet. Ensure the speaker cabinet's impedance matches the ampframleiðsla lifier.

Image: Rear panel of the Blackstar HT-5RH MK III amplifier head, highlighting the speaker output jacks.
- Connect a speaker cable from one of the HÁTALARAÚTTAK on the rear panel to your speaker cabinet.
- The amplifer býður 1 x 8 OHM OR 2 x 16 OHM og 1 x 16 OHM outputs. Match the impedance of your cabinet to the correct output jack.
- Ensure a speaker is connected before powering on the amplyftara til að koma í veg fyrir skemmdir.
Rafmagnstenging
Connect the supplied mains power cable to the Aðalinntak on the rear panel and to a suitable power outlet.

Image: Rear panel of the Blackstar HT-5RH MK III amplifier head, showing the mains input.
Stýringar og aðgerðir
The front panel of your HT-5RH MK III features intuitive controls for shaping your tone.

Image: Front panel of the Blackstar HT-5RH MK III amplifier head, displaying all controls.
Stýringar á framhlið
- POWER rofi: Skiptir um amplíflegri til eða frá.
- 5W / 0.5W Switch: Selects between 5-watt and 0.5-watt output power for different volume requirements.
- REVERB Level: Adjusts the amount of built-in reverb effect.
- OD EQUALISATION (ISF, TREBLE, MIDDLE, BASS): Tone stack for the Overdrive channel. The ISF (Infinite Shape Feature) control shifts the tone from a classic British sound (counter-clockwise) to a more aggressive American sound (clockwise).
- OVERDRIVE (VOLUME, GAIN, VOICE, SELECT): Controls for the Overdrive channel. RÁÐMÁL adjusts the output level, ÁVIÐ controls the amount of distortion, RÖDD selects different overdrive voicings, and VELJA switches between Clean and Overdrive channels.
- CLEAN (VOLUME, VOICE): Controls for the Clean channel. RÁÐMÁL adjusts the output level, RÖDD selects different clean voicings.
- INNGANGUR: 1/4" tengi til að tengja gítarinn þinn.
Tengingar að aftan

Image: Rear panel of the Blackstar HT-5RH MK III amplifier head, displaying all connections.
- USB hljóð: Connects to a computer for direct recording.
- SEND/RETURN (Effects Loop): For connecting external effects pedals. The STIG switch adjusts the effects loop sensitivity (+4dBu/-10dBV).
- FÓTROFI: Connects an optional footswitch for channel switching.
- LÍNA Í: 3.5mm input for connecting external audio sources like MP3 players.
- CABRIG OUTPUT (LINE OUT / PHONES): Emulated output for direct recording or headphones, with selectable cabinet simulations.
- ÚTGÖNGUR hátalara: Connects to external speaker cabinets (1x8 Ohm or 2x16 Ohm, 1x16 Ohm).
- AÐINGIÐ: Rafmagnssnúrutenging.
Notkunarleiðbeiningar
Grunnaðgerð
- Tryggðu að amplifier is connected to a suitable speaker cabinet and power supply.
- Tengdu gítarinn þinn við INNSLAG tjakkur.
- Snúðu á KRAFTUR skipta yfir í ON. Allow a few moments for the tubes to warm up.
- Select your desired power output using the 5W / 0.5W skipta.
- Notaðu HREIN channel controls (RÁÐMÁL, RÖDD) eða OVERDRIVE channel controls (RÁÐMÁL, ÁVIÐ, RÖDD, VELJA) to achieve your desired tone.
Using the Effects Loop
The effects loop allows you to integrate external effects pedals into your signal chain.
- Tengdu við SENDA jack to the input of your effects pedal.
- Connect the output of your effects pedal to the TILBAKA tjakkur.
- Stilltu STIG switch (+4dBu for rack effects, -10dBV for stompboxes) to match your pedal's output.
Recording and Silent Practice
- USB hljóð: Tengdu USB snúru frá amplifier to your computer. The amplifier will appear as an audio interface, allowing direct recording.
- CABRIG Output: Til að æfa í hljóði skaltu tengja heyrnartól við CABRIG OUTPUT. This output also provides emulated cabinet tones for direct recording to a mixer or audio interface.
- MP3/Line Input: Connect an external audio device (e.g., MP3 player, phone) to the LINE IN jack to play along with backing tracks.
Aflminnkun
The 5W / 0.5W switch allows you to reduce the amplifier's output power, making it suitable for lower volume practice or recording while retaining tube tone.
Viðhald
- Haltu amplifier clean by wiping with a dry, soft cloth.
- Forðastu að afhjúpa amplifier að miklum hita eða raka.
- Athugið reglulega hvort allar kapaltengingar séu vel festar.
- Tube replacement should be performed by qualified service personnel.
Úrræðaleit
| Vandamál | Möguleg orsök | Lausn |
|---|---|---|
| Ekkert hljóð | Power not on, speaker not connected, guitar cable faulty, volume low. | Check power switch, ensure speaker is connected, test guitar cable, increase volume controls. |
| Veikt eða brenglað hljóð | Faulty tubes, incorrect impedance match, effects loop issue. | Consult qualified technician for tube check, verify speaker impedance, bypass effects loop to test. |
| Suður eða hávaði | Ground loop, faulty cables, proximity to interference. | Try different power outlets, use shielded cables, move away from electronic devices. |
Tæknilýsing
- Gerð: HT5RHMK3
- Úttak Wattage: 5 Watt RMS
- Rör: 12BH7 (Power Amp)
- Rásir: 2 (Clean, Overdrive)
- Stýringar: Power, 5W/0.5W Switch, Reverb Level, ISF, Treble, Middle, Bass, Overdrive Volume, Gain, Voice, Select, Clean Volume, Voice.
- Inntak: Guitar Input, MP3/Line Input.
- Úttak: USB Audio, Effects Loop (Send/Return with Level), Footswitch, CabRig Output (Line Out/Headphones), Speaker Outputs (1x8 Ohm or 2x16 Ohm, 1x16 Ohm).
- Stærðir: 12.36 x 10.2 x 22.32 tommur
- Þyngd hlutar: 19.94 pund
- Aflgjafi: Rafmagn með snúru
- Efni: Ryðfrítt stál
Ábyrgð og stuðningur
For warranty information and technical support, please refer to the official Blackstar Amplification website or contact your local dealer. Keep your proof of purchase for any warranty claims.
Vörumyndbönd
Blackstar HT-5 gítar Amplifier Sound Review
Video: A sound review of the Blackstar HT-5 Guitar Amplifier, demonstrating its tonal capabilities.
OriPure 15W Tube Guitar Amplifier Head OA-H15 (Seller Video)
Video: A demonstration of the OriPure 15W Tube Guitar Amplifier Head OA-H15, showcasing its features and sound. Note: This is a seller-provided video for a related product.





