Sylvania A19 LED Light Bulbs Instruction Manual

1. Inngangur

Thank you for choosing Sylvania A19 LED Light Bulbs. This manual provides essential information for the safe installation, operation, and maintenance of your new LED bulbs. Please read these instructions carefully before use and retain them for future reference.

2. Vöru lokiðview

This package includes a combination of Sylvania A19 LED light bulbs designed to replace traditional incandescent bulbs. You will find both 40W equivalent (6W, 450 lumens) and 60W equivalent (8.5W, 800 lumens) bulbs, all featuring a soft white (2700K) color temperature and a standard medium (E26) base.

Image 1: Sylvania A19 LED Light Bulbs, showing both 40W and 60W equivalent bulbs in their packaging.

These energy-efficient bulbs offer instant illumination, long lifespan, and are free from UV/IR emissions, mercury, and lead.

3. Öryggisupplýsingar

• Hætta á raflosti: Slökkvið alltaf á rafmagninu á ljósastæðinu áður en pera er skoðuð, sett upp eða fjarlægð.
• Aðeins innanhússnotkun: Þessar perur eru hannaðar til notkunar innandyra á þurrum stöðum. Notið ekki í rökum eða þurrum rýmum.amp umhverfi nema tækið sé sérstaklega ætlað fyrir slíkar aðstæður.
• Ekki fyrir lokaðar innréttingar: Avoid using these bulbs in fully enclosed fixtures, as this can shorten their lifespan due to heat buildup.
• Ódekkanleg: These bulbs are non-dimmable. Do not use with dimmer switches, as this may cause damage to the bulb or dimmer.
• Rekstrarhitastig: Suitable for operation in temperatures between -20°C and +40°C (-4°F and +104°F).
• Þyngd: Do not use in fixtures where the bulb's weight might exceed the fixture's capacity.

4. Uppsetning og uppsetning

Installation of Sylvania A19 LED light bulbs is straightforward. Follow these steps:

1. Slökktu á rafmagni: Locate the light switch or circuit breaker controlling the fixture and turn off the power completely.
2. Fjarlægðu gamla peru: Skrúfið núverandi ljósaperu varlega úr ljósastæðinu. Leyfið henni að kólna ef hún hefur verið notuð nýlega.
3. Settu inn nýja LED peru: Gently screw the Sylvania A19 LED bulb into the socket until it is snug. Do not overtighten.
4. Endurheimta kraft: Kveiktu aftur á rafmagninu á rofanum eða aflrofanum.
5. Próf: Turn on the light switch to ensure the bulb illuminates correctly.

Image 2: A set of four Sylvania A19 LED light bulbs, ready for installation.

5. Notkunarleiðbeiningar

Sylvania A19 LED light bulbs operate like traditional bulbs. Once installed, simply use the wall switch or fixture switch to turn the light on or off. These bulbs provide instant full brightness with no warm-up time.

6. Viðhald

These LED bulbs require minimal maintenance due to their long lifespan of up to 11,000 hours.

• Þrif: Til að þrífa peruna skaltu ganga úr skugga um að slökkt sé á henni og að hún sé köld. Þurrkaðu varlega með mjúkum, þurrum klút. Ekki nota fljótandi hreinsiefni eða slípiefni.
• Skipti: When the bulb reaches the end of its life, follow the installation steps in Section 4 to replace it with a new Sylvania A19 LED bulb. Dispose of old bulbs according to local regulations.

7. Bilanagreining

If your Sylvania A19 LED bulb does not light up after installation, consider the following:

• Enginn kraftur: Check if the light switch is in the 'ON' position. Verify that the circuit breaker for the fixture has not tripped.
• Laus tenging: Turn off the power, then carefully re-screw the bulb into the socket to ensure a secure connection.
• Incorrect Fixture: Ensure the fixture is compatible with A19 bulbs and has a medium (E26) base.
• Dimmarrofi: Confirm that the fixture is not connected to a dimmer switch, as these non-dimmable bulbs are not compatible.
• Damaged Bulb: If the above steps do not resolve the issue, the bulb may be faulty. Replace it with a new one.

8. Tæknilýsing

9. Ábyrgð og stuðningur

For warranty information or technical support, please refer to the packaging or contact LEDVANCE customer service directly. Keep your purchase receipt as proof of purchase.