Aigo Q2503 Mini-Tower PC Case User Manual

1. Inngangur

Thank you for choosing the Aigo Q2503 Mini-Tower PC Case. This manual provides detailed instructions for the proper installation, operation, and maintenance of your new computer chassis. Please read this guide thoroughly before beginning assembly to ensure optimal performance and longevity of your system components.

2. Vöru lokiðview

The Aigo Q2503 is a compact Mini-Tower PC case designed for M-ATX and ITX motherboards. It offers a streamlined design with essential features for building a functional and efficient computer system. Its robust construction provides a secure environment for your components.

Mynd 2.1: Framhlið view of the Aigo Q2503 Mini-Tower PC Case, showcasing its compact design and front panel I/O ports.

Mynd 2.2: Framan view of the Aigo Q2503 Mini-Tower PC Case, highlighting the vertical ventilation slats and front panel controls.

3. Uppsetning og uppsetning

Follow these steps for proper component installation within the Aigo Q2503 case.

3.1 Undirbúningur málsins

1. Takið umbúðirnar úr umbúðunum og fjarlægið öll umbúðaefni.
2. Carefully remove the side panels by unscrewing the thumbscrews at the rear of the case and sliding the panels backward.

Mynd 3.1: Innri view of the Aigo Q2503 PC Case, showing the motherboard tray and drive mounting points.

3.2 Uppsetning móðurborðs

1. Install the I/O shield provided with your motherboard into the rear opening of the case.
2. Align your M-ATX or ITX motherboard with the standoffs inside the case. Ensure all standoffs match the motherboard's mounting holes.
3. Festið móðurborðið með viðeigandi skrúfum.

3.3 Uppsetning drifs

• SSD (1x): Locate the dedicated SSD mounting point (typically on the motherboard tray or behind it). Secure the SSD using screws.
• HDD (1x): Locate the HDD bay. Slide the HDD into the bay and secure it with screws.

3.4 Expansion Card Installation (VGA)

1. Fjarlægðu nauðsynlegar hlífar fyrir útvíkkunarraufina af aftan á kassanum.
2. Insert your graphics card (VGA) or other expansion cards into the PCIe slots on your motherboard.
3. Secure the expansion cards with screws. Note the maximum VGA length supported is 150 mm.

3.5 Uppsetning örgjörvakælis

Install your CPU cooler according to its manufacturer's instructions. Ensure the cooler's height does not exceed the maximum supported height of 250 mm for this case.

3.6 Uppsetning aflgjafa

The Aigo Q2503 supports ATX power supplies. Mount your ATX power supply in the designated area, typically at the top or bottom rear of the case, and secure it with screws.

3.7 Uppsetning viftu

The case supports the following fan configurations (fans are not included):

• Aftan: 1 x 80 mm fan
• Hlið: 1 x 120 mm fan

Install fans in the specified locations to optimize airflow.

3.8 Framhliðartengingar

Connect the front panel cables (Power SW, Reset SW, HDD LED, Power LED, USB 2.0, Audio/Mic) to the corresponding headers on your motherboard. Refer to your motherboard manual for exact pin layouts.

4. Notkun tölvukassans

Once all components are installed and connected, replace the side panels and secure them. Connect your monitor, keyboard, mouse, and power cable to your system. Press the power button on the front panel to start your computer.

Framhliðin veitir þægilegan aðgang að:

• Aflhnappur
• Endurstilla hnappur
• 2 x USB 2.0 tengi
• Audio Out (Headphone) Jack
• Hljóðnemi í Jack

5. Viðhald

Reglulegt viðhald hjálpar til við að tryggja bestu mögulegu afköst og lengir líftíma íhluta tölvunnar.

5.1 Þrif

• Að utan: Notaðu mjúkan, damp klút til að þurrka af ytra byrði. Forðist slípandi hreinsiefni.
• Innrétting: Periodically open the case and use compressed air to remove dust buildup from components, fans, and filters. Ensure the system is powered off and unplugged before cleaning the interior.

5.2 Loftflæði

Ensure that the case's ventilation openings are not obstructed to maintain proper airflow and prevent overheating.

6. Bilanagreining

If you encounter issues with your PC build, consider the following general troubleshooting steps:

• Enginn kraftur: Double-check all power connections, including the power supply to the wall, the power supply to the motherboard, and the front panel power switch cable to the motherboard.
• Ofhitnun: Verify that all case fans and CPU cooler fans are spinning correctly. Ensure proper airflow within the case and that ventilation openings are clear.
• Tengi á framhliðinni virka ekki: Confirm that the USB and Audio/Mic cables from the front panel are correctly connected to the motherboard headers.
• Vandamál með íhluti: Ensure that all components, especially the graphics card and CPU cooler, are within the specified maximum dimensions for the case.

7. Tæknilýsing

Below are the detailed specifications for the Aigo Q2503 Mini-Tower PC Case:

8. Upplýsingar um ábyrgð

The Aigo Q2503 Mini-Tower PC Case comes with a manufacturer's warranty of 12 mánuðir from the date of purchase. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims. The warranty does not cover damage caused by improper installation, misuse, accidents, modifications, or unauthorized repairs.

9. Stuðningur

For technical assistance, troubleshooting, or warranty inquiries, please contact your retailer or the official Aigo support channels. Refer to the Aigo official websíðu fyrir nýjustu tengiliðaupplýsingar og stuðningsúrræði.

Before contacting support, please have your product model (Q2503-BK) and proof of purchase readily available.