1. Inngangur
This manual provides detailed instructions for the installation, operation, and maintenance of your Montech AX 120 ARGB Fans. These 120mm fans are designed to provide efficient cooling and customizable lighting for your computer system. Please read this manual thoroughly before installation to ensure proper function and safety.
2. Öryggisupplýsingar
- Always disconnect power from your computer before installing or handling internal components.
- Handle fans by their frames, avoiding contact with the blades.
- Tryggið rétta jarðtengingu til að koma í veg fyrir skemmdir vegna rafstöðuvökvaútblásturs (ESD).
- Haldið smáhlutum og umbúðaefni frá börnum.
- Do not attempt to modify the fan or its cables. Unauthorized modifications may void your warranty and pose safety risks.
3. Innihald pakka
Gakktu úr skugga um að allir hlutir séu til staðar í pakkanum þínum:
- Montech AX 120 ARGB Fan (x4)
- Festiskrúfur (x16)
- Fan Hub (if included in your specific pack)
Figure 3.1: Montech AX 120 ARGB Fan (Pack of 4)
4. Uppsetning og uppsetning
Follow these steps to install your Montech AX 120 ARGB Fans:
- Undirbúið kerfið ykkar: Power off your computer and disconnect it from the power outlet. Open your computer case.
- Identify Fan Mounting Locations: Determine where you want to install the fans (e.g., front, top, rear, bottom of the case).
- Setjið upp vifturnar: Position each fan in the desired location. The AX series fans are designed to blow air from the RGB-lit side towards the non-RGB side. Consider this for optimal airflow (e.g., intake or exhaust). Secure each fan using four mounting screws. The integrated anti-vibration pads help reduce noise from resonance.
Mynd 4.1: Framan view of the Montech AX 120 ARGB Fan
Mynd 4.2: Til baka view of the Montech AX 120 ARGB Fan, indicating airflow direction from front to back.
Figure 4.3: Integrated anti-vibration pads for reduced noise.
- Connect Power and ARGB Cables: Each fan has two cables: a 4-pin PWM cable for fan speed control and a 3-pin ARGB cable for lighting control.
- Connect the 4-pin PWM cable to an available 4-pin fan header on your motherboard or to a fan hub.
- Connect the 3-pin ARGB cable to an available 5V 3-pin ARGB header on your motherboard or to a compatible ARGB controller/hub. Athugið: Ekki tengja við 12V RGB haus, því það mun skemma LED ljósin.
- Kapalstjórnun: Leiðið snúrurnar snyrtilega til að koma í veg fyrir truflun á öðrum íhlutum og til að bæta loftflæði.
- Lokaðu hlífinni og kveiktu á henni: Once all connections are secure, close your computer case, reconnect power, and power on your system.
5. Notkunarleiðbeiningar
The Montech AX 120 ARGB Fans offer both speed and lighting control:
5.1 Hraðastýring viftu (PWM)
The 4-pin PWM connection allows for precise fan speed control based on system temperature. The fan speed can be adjusted from 600 RPM to 1600 RPM.
- BIOS/UEFI: Access your motherboard's BIOS/UEFI settings to configure fan curves. This allows the fan speed to automatically adjust based on CPU or system temperatures.
- Hugbúnaður: Use your motherboard's fan control software (e.g., ASUS Fan Xpert, MSI Dragon Center, Gigabyte SIV) to create custom fan profiles within your operating system.
Figure 5.1: PWM fan speed adjustment from 600 RPM to 1600 RPM.
5.2 ARGB lýsingarstýring
The Addressable RGB (ARGB) lighting can be synchronized and customized through your motherboard's software or a dedicated ARGB controller.
- Hugbúnaður fyrir móðurborð: If connected to a 5V 3-pin ARGB header, use your motherboard's RGB software (e.g., ASUS Aura Sync, MSI Mystic Light Sync, Gigabyte RGB Fusion, ASRock Polychrome Sync) to control lighting effects, colors, and synchronization with other ARGB components.
- ARGB stjórnandi: If using a standalone ARGB controller, refer to the controller's manual for specific instructions on changing lighting modes.
Figure 5.2: Customizable hexagonal ARGB lighting.
6. Viðhald
Regular maintenance ensures optimal performance and longevity of your fans:
- Þrif: Hreinsið reglulega ryk af viftublöðunum og rammanum með þrýstilofti eða mjúkum bursta. Gangið úr skugga um að tölvan sé slökkt og úr sambandi áður en hún er þrifin.
- Skoðun: Check cables for any signs of wear or damage. Ensure mounting screws are secure.
- Langlífi burðar: The fans feature an HDB (Hydro Dynamic Bearing) designed for high-end durability and a lifespan of 40,000 hours. No user maintenance is required for the bearing.
Figure 6.1: Hydro Dynamic Bearing (HDB) for extended lifespan.
7. Bilanagreining
If you encounter issues, refer to the following troubleshooting guide:
| Vandamál | Möguleg orsök | Lausn |
|---|---|---|
| Vifta snýst ekki | Loose 4-pin PWM cable connection Ónægjandi straumur frá móðurborðshaus Fan curve set too low in BIOS/software | Ensure 4-pin PWM cable is securely connected. Try connecting to a different fan header. Adjust fan curve settings in BIOS/software to ensure fans spin at low temperatures. |
| ARGB lýsing virkar ekki | Loose 3-pin ARGB cable connection Connected to incorrect 12V RGB header ARGB software not configured or running | Ensure 3-pin ARGB cable is securely connected to a 5V ARGB header. Verify connection is to a 5V 3-pin ARGB header, not a 12V 4-pin RGB header. Install and configure your motherboard's ARGB software or check your ARGB controller settings. |
| Óhóflegur hávaði | Hár viftuhraði Titringur Hindrun | Adjust fan speed in BIOS/software to a lower RPM. Ensure all mounting screws are tight. The fans have anti-vibration pads to minimize this. Check for any cables or objects interfering with fan blades. |
8. Tæknilýsing
Key technical specifications for the Montech AX 120 ARGB Fan:
- Gerð: AX120 PWM BLACK
- Stærð viftu: 120 mm x 120 mm x 25 mm (4.72 x 4.72 x 0.98 tommur)
- Gerð legur: Hydro Dynamic Bearing (HDB)
- Snúningshraði: 600 - 1600 snúningar á mínútu (PWM-stýrt)
- Hávaðastig: Under 27.9 dB(A)
- Máttur tengi: 4-Pin PWM
- ARGB tengi: 3-Pin 5V ARGB
- Metið Voltage: 12V DC (Fan), 5V DC (LED)
- Hvaðtage: 2 vött
- Efni: Málmur, plast, gúmmí
- Líftími: 40,000 klst
9. Ábyrgð og stuðningur
Montech products are manufactured to the highest quality standards. For warranty information, technical support, or customer service inquiries, please visit the official Montech websíðuna eða hafið samband við næsta söluaðila. Vinsamlegast geymið kaupkvittunina vegna ábyrgðarkröfu.
