1. Inngangur
This manual provides essential information for the proper use and care of your BERNY Automatic Titanium Watch, model AMT258MS-A. This timepiece features a Japanese automatic movement, a durable titanium case and bracelet, an AR-coated sapphire crystal, and 10ATM water resistance. Please read these instructions carefully to ensure optimal performance and longevity of your watch.
2. Uppsetning og fyrsta notkun
2.1 Upphafleg vinding
For automatic watches, the first time they are used, they must be fully wound. To manually wind the watch, rotate the crown clockwise several times (approximately 20-30 rotations) while it is in the normal operating position (position 0, pushed in). This provides an initial power reserve.
2.2 Stilla tíma
- Pull the crown out to position 2 (the outermost position). The second hand will stop, allowing for precise time setting.
- Snúðu krónunni til að færa klukkustundar- og mínútuvísana á þann tíma sem óskað er eftir.
- Ýttu kórónunni aftur í stöðu 0 til að ræsa úrið.
2.3 Stilla dagsetningu
- Dragðu krúnuna út í stöðu 1 (miðstöðuna).
- Snúðu kórónu til að stilla dagsetningu.
- The date changes every 24 hours. If the AM/PM setting is incorrect, adjust the time by 12 hours using the time setting procedure (position 2) to ensure the date changes at midnight, not noon.
- Ýtið krúnunni aftur í stöðu 0.
3. Rekstur
3.1 Sjálfvirk hreyfing
Your BERNY watch is powered by a reliable Japanese automatic movement. This movement self-winds through the natural motion of your wrist. For consistent accuracy, it is recommended to wear the watch for more than 10 hours a day. If not worn regularly, manual winding (as described in section 2.1) may be necessary to maintain the power reserve.
3.2 Super Luminous Display
The watch hands and markers are coated with a super-luminous material. This material absorbs light and emits it in low-light conditions, providing enhanced readability in the dark. Exposure to light sources will charge the luminous elements.
4. Viðhald og umönnun
4.1 Vatnsheldni (10ATM)
This watch is water-resistant up to 10 ATM (100 meters or 330 feet). This rating means it is suitable for swimming, showering, and general water activities. However, it is not recommended for diving or high-impact water sports. Always ensure the crown is fully pushed in before any contact with water.
4.2 Þrif
To clean your watch, gently wipe the case and bracelet with a soft, damp cloth. For stubborn dirt, a mild soap solution can be used, followed by rinsing with clean water and thorough drying. Avoid using harsh chemicals or abrasive materials.
4.3 Umhirða safírkristalls
The watch features an anti-reflective (AR) coated sapphire crystal lens, known for its superior scratch resistance. While highly durable, it is not entirely scratch-proof. Avoid direct impact or contact with extremely hard surfaces to prevent damage.
4.4 Titanium Construction
The watch case and bracelet are constructed from lightweight and durable titanium, offering excellent corrosion resistance. The screw-down case back further enhances its protection and longevity.
4.5 Secure Double Safety Clasp
The watch is equipped with a double safety clasp to ensure a secure fit on your wrist. To open, press the side buttons on the clasp. To close, fold the clasp and press until it clicks securely.
5. Bilanagreining
- Úrið gengur ekki: If the watch stops, it may need winding. Manually wind the watch as described in section 2.1, or wear it for an extended period to allow the automatic movement to build power reserve.
- Date Incorrect: If the date is incorrect or changes at noon, refer to section 2.3 for proper date setting and AM/PM adjustment.
- Ónákvæm tímamæling: Mechanical watches can have slight variations in accuracy. Ensure the watch is regularly worn or wound. If significant inaccuracies persist, professional inspection may be required.
6. Tæknilýsing
| Eiginleiki | Smáatriði |
|---|---|
| Gerðarnúmer | AMT258MS-A |
| Hreyfing | Japanese Automatic (Miyota 8215) |
| Málsefni | Títan |
| Ól efni | Títan |
| Linsuefni | AR Coated Sapphire Glass |
| Þyngd | 93g (um það bil) |
| Tegund læsingar | Þrýstihnappur fellifesta með öryggi |
| Vatnsþol | 10 hraðbankar (100 metrar / 330 fet) |
| Mál máls | 39.5mm þvermál, 12mm þykkt |
| Bandbreidd | 20 mm |
7. Vörumyndband
View the official product video for a visual overview of the BERNY Automatic Titanium Watch AMT258MS-A.
8. Ábyrgð og stuðningur
For any questions, concerns, or support regarding your BERNY Automatic Titanium Watch, please contact our customer service team. We are committed to providing satisfactory solutions for our products.
Vinsamlegast skoðið kaupskjölin varðandi nákvæma ábyrgðarskilmála og upplýsingar um tengiliði.
