MakeSkyBlue MPPT Solar Charge Controller (40A-V123) Instruction Manual

1. Inngangur

This manual provides essential information for the safe and efficient operation of your MakeSkyBlue MPPT Solar Charge Controller, model 40A-V123. This device is designed to optimize power harvesting from your solar panels and efficiently charge your battery bank in 12V, 24V, or 48V solar systems. Please read this manual thoroughly before installation and use.

Figure 1: MakeSkyBlue 40A-V123 MPPT Solar Charge Controller

2. Öryggisleiðbeiningar

Fylgið eftirfarandi öryggisráðstöfunum við uppsetningu og notkun:

• Ensure all wiring is correctly polarized and securely connected to prevent damage to the controller and other components.
• Always connect the battery to the charge controller fyrst, og aftengja það síðast.
• Do not connect the solar panel array to the controller without a battery connected.
• Ensure the solar panel array's open circuit voltage (Voc) fer ekki yfir hámarksinntaksmagn stjórntækisinstage.
• Setjið stjórntækið upp á vel loftræstum stað, fjarri eldfimum efnum og beinu sólarljósi.
• Use appropriate circuit breakers or fuses for all connections (solar, battery, load).
• Avoid touching live terminals. Only qualified personnel should perform electrical work.

3. Vöru lokiðview

The MakeSkyBlue 40A-V123 MPPT Solar Charge Controller features advanced Maximum Power Point Tracking technology to maximize energy harvest from your solar array. It includes a multi-function LCD for monitoring and parameter adjustment, and supports 12V, 24V, and 48V battery systems with automatic voltage uppgötvun.

3.1 Helstu eiginleikar

• Intelligent Maximum Power Point Tracking (MPPT) technology.
• Built-in DSP controller for high performance.
• Þrír-stage charging algorithm to optimize battery performance and lifespan.
• Multi-function LCD display with backlight for real-time data and error codes.
• Sjálfvirk rafhlaða voltage detection (12V/24V/48V).
• Compatible with various battery types including Lead-Acid, AGM, and Gel.
• Protection features: limited current, temperature, and overcharging.

Figure 2: Compatible Battery Types (Gel, Flooded, AGM)

Figure 3: Illustration of Maximum Power Point Tracking (MPPT) vs. PWM

4. Uppsetning og uppsetning

Follow these steps for proper installation of your MPPT solar charge controller. Refer to the wiring diagram for visual guidance.

4.1 Raflagnamynd

Figure 4: MPPT Charge Controller System Wiring Diagram

4.2 Uppsetningarskref

1. Uppsetning: Mount the controller vertically on a non-flammable surface in a cool, dry, and well-ventilated area. Ensure adequate clearance around the unit for heat dissipation.
2. Rafhlöðutenging: Connect the battery cables to the controller's BAT+ and BAT- terminals. Ensure correct polarity. The controller will automatically detect the battery voltage (12V, 24V eða 48V).
3. Tenging sólarplötu: Connect the solar panel array cables to the controller's PV+ and PV- terminals. Ensure correct polarity. The controller will begin charging the battery.
4. Tenging við álag (valfrjálst): If using the load output, connect your DC loads to the OUT+ and OUT- terminals. Ensure the total current draw does not exceed the controller's rated load current.
5. Staðfestu tengingar: Double-check all connections for tightness and correct polarity before powering on the system.

Important: Always connect the battery first and disconnect it last. Failure to follow this sequence may damage the controller.

5. Notkunarleiðbeiningar

The controller's LCD display provides real-time system status and allows for parameter adjustments. The control buttons are PRG/ESC, Up (▲), Down (▼), and ENTER.

5.1 LCD skjár aðgerðir

The LCD cycles through various screens displaying system information. You can manually cycle through screens using the Up/Down buttons or enter parameter settings using PRG/ESC and ENTER.

• Aðalskjár: Shows charging status, battery level, and output status.


Figure 5: Main Display showing charge and output status.

• Cumulative Power Generation: Displays total energy generated by the solar panels.


Figure 6: Display showing cumulative power generation.

• PV binditage and Load Power: Shows current solar panel voltage and load power consumption.


Figure 7: Display showing PV voltage and load power.

• Rafhlaða Voltage and Load Current: Sýnir núverandi rúmmál rafhlöðunnartage og álagsstraumur.


Figure 8: Display showing battery voltage og álagsstraumur.

• Accumulated Discharge: Shows total energy discharged from the battery.


Figure 9: Display showing accumulated discharge.

• Innra hitastig: Sýnir innra hitastig stjórntækisins.


Figure 10: Display showing internal temperature.

5.2 Stilling breytu

To enter parameter adjustment mode, press the PRG/ESC hnappinn. Notaðu Up (▲) og Niður (▼) buttons to navigate through parameters and adjust values. Press ENTER to confirm changes. Press PRG/ESC aftur til að fara úr stillingarstillingunni.

Common adjustable parameters include:

• b00: Load working mode (e.g., 24H for continuous, or timed modes).


Figure 11: Parameter b00 for load working mode.

• b01: Ofhleðsluvörn voltage (e.g., 55.2V for 48V system).


Figure 12: Parameter b01 for overcharge protection voltage.

• b02: Endurheimt hleðslu voltage (e.g., 58.0V for 48V system).


Figure 13: Parameter b02 for charging recovery voltage.

• b03: Ofhleðsluvörn voltage (e.g., 40.0V for 48V system).


Figure 14: Parameter b03 for over-discharge protection voltage.

• b04: Ofhleðsla bata binditage.


Figure 15: Parameter b04 for over-discharge recovery voltage.

• b06: Battery type setting (e.g., 47.9V for a specific battery type).


Figure 16: Parameter b06 for battery type setting.

Refer to the full product manual (if available from the manufacturer) for a complete list of parameters and their recommended settings for different battery types.

6. Viðhald

Reglulegt viðhald tryggir bestu mögulegu afköst og endingu sólarhleðslustýringarinnar:

• Þrif: Periodically clean the controller's exterior, especially the cooling fins and fan openings, to prevent dust buildup and ensure proper heat dissipation. Use a dry cloth.
• Tengingarathugun: Annually inspect all wiring connections for tightness and corrosion. Loose connections can cause overheating and power loss.
• Loftræsting: Gakktu úr skugga um að uppsetningarsvæðið sé vel loftræst og laust við hindranir.
• Rafhlaða skoðun: Regularly check your battery bank for signs of damage, corrosion, or electrolyte levels (for flooded batteries).

7. Bilanagreining

The LCD display can show error codes to indicate specific issues. If an error occurs, note the code and refer to the manufacturer's documentation for detailed troubleshooting steps. General troubleshooting tips include:

• Enginn skjár/Enginn rafmagn: Check battery connections and ensure the battery has sufficient voltage.
• Engin hleðsla: Verify solar panel connections, ensure sufficient sunlight, and check for any shading on the panels. Confirm PV array voltage er innan rekstrarsviðs stjórntækisins.
• Overcharging/Undercharging: Check battery type settings and charging parameters (b01, b02). Ensure the battery is healthy.
• Hleðsla virkar ekki: Check load connections, ensure the load output is enabled (b00 setting), and verify the load current does not exceed the controller's rating. Check for over-discharge protection (b03).
• Ofhitavilla: Ensure adequate ventilation around the controller. Clean any dust from cooling fins.

If the issue persists, contact MakeSkyBlue customer support.

8. Tæknilýsing

Key technical specifications for the MakeSkyBlue 40A-V123 MPPT Solar Charge Controller:

8.1 Vörumál

Figure 17: Product Dimensions (approx. 21.65cm H x 14.96cm W x 8.66cm D)

9. Ábyrgð og stuðningur

For warranty information, technical support, or service inquiries, please contact MakeSkyBlue directly through their official channels. Keep your purchase receipt as proof of purchase.

Þú getur heimsótt MakeSkyBlue Store on Amazon fyrir frekari upplýsingar.