1. Inngangur
This manual provides essential instructions for the installation, operation, and maintenance of your Zephyr Siena ZSI-E36D Wall Mounted Range Hood. Please read this manual thoroughly before installation and use to ensure proper function and safety. Retain this manual for future reference.

Mynd 1: Framan view of the Zephyr Siena ZSI-E36D Wall Mounted Range Hood.
2. Öryggisupplýsingar
VIÐVÖRUN: Til að draga úr hættu á eldi, raflosti eða meiðslum á fólki skaltu fylgjast með eftirfarandi:
- Uppsetning og raflagnir verða að vera gerðar af hæfum aðilum í samræmi við alla gildandi reglur og staðla, þar með talið brunamatsgerð.
- Nægjanlegt loft er nauðsynlegt fyrir réttan bruna og útblástur lofttegunda í gegnum útblástur (stromp) eldsneytisbrennslubúnaðar til að koma í veg fyrir bakstraum. Fylgdu leiðbeiningum framleiðanda hitabúnaðar og öryggisstöðlum eins og þeim sem gefin eru út af National Fire Protection Association (NFPA), og American Society for Heating, Refrigeration and Air Conditioning Engineers (ASHRAE) og staðbundnum lögum.
- Þegar skorið er eða borað í vegg eða loft skal ekki skemma raflagnir og önnur falin tól.
- Loftstokksviftur verða alltaf að vera loftaðar út í náttúruna.
Tillaga 65 Viðvörun:
Þessi vara getur útsett þig fyrir efnum, þar á meðal blýi, sem Kaliforníuríki vita að veldur krabbameini og fæðingargöllum eða öðrum skaða á æxlun. Fyrir frekari upplýsingar farðu á www.P65Warnings.ca.gov.
3. Uppsetning og uppsetning
The Zephyr Siena ZSI-E36D is designed for wall-mounted installation. Proper installation is crucial for optimal performance and safety. Refer to the separate detailed installation guide provided with your product for specific instructions, diagrams, and required tools.
3.1 Athuganir fyrir uppsetningu
- Verify that the mounting surface is structurally sound and capable of supporting the hood's weight (approximately 55 pounds).
- Ensure adequate electrical supply (120 Volts) is available at the installation location.
- Confirm the chosen ventilation type (ducted or recirculating) and prepare the necessary ductwork or recirculating kit.
3.2 Uppsetning
The range hood is designed to be mounted directly to the wall above your cooking surface. Precise measurements and secure fastening are essential. Consult the installation guide for recommended mounting heights and stud placement.

Figure 2: Zephyr Siena ZSI-E36D Range Hood installed in a kitchen setting, showing its wall-mounted design.
3.3 Leiðsla
This model supports both ducted and ductless/recirculating ventilation. For ducted installations, ensure the ductwork is properly sealed and vented to the outdoors. For recirculating installations, a separate recirculating kit (sold separately) is required to filter and return air to the kitchen.
4. Notkunarleiðbeiningar
The Zephyr Siena ZSI-E36D features intuitive ICON Touch® LCD controls for easy operation of its various functions.
4.1 Power and Fan Speed
- Kveikt/slökkt: Press the power button on the control panel to turn the hood on or off.
- Stilling viftuhraða: Use the '+' and '-' buttons to cycle through the available fan speeds. The hood offers a maximum airflow capacity of 650 Cubic Feet Per Minute (CFM).
- Airflow Control Technology (ACT™): This feature allows for precise control over the maximum CFM output, which can be adjusted during installation to comply with local building codes. Refer to the installation guide for ACT™ configuration.
4.2 Lýsing
The hood is equipped with dual-level LumiLight LED lighting featuring TruHue™ technology, allowing you to adjust the light intensity to match your kitchen's primary lighting.
- Ljós kveikt/slökkt: Ýttu á ljósahnappinn til að kveikja eða slökkva á LED ljósunum.
- Birtustilling: Press and hold the light button to cycle through different brightness levels.

Figure 3: The range hood with its LumiLight LED lighting activated, providing illumination over the cooking surface.
4.3 Optional ADA-Compliant Remote Control
An optional ADA-compliant remote control is available for enhanced accessibility. Refer to the remote control's separate instructions for pairing and operation.
5. Viðhald
Reglulegt viðhald tryggir langlífi og bestu mögulegu afköst gufuspípunnar.
5.1 Þrif á síu fyrir varnarrör
The Zephyr Siena ZSI-E36D uses baffle filters to capture grease and cooking odors. These filters should be cleaned regularly, typically every 3-6 weeks depending on cooking frequency.
- Fjarlæging: Carefully slide the baffle filters out of their slots.
- Þrif: Wash the filters in hot, soapy water or place them in a dishwasher. Ensure they are completely dry before reinstallation.
- Enduruppsetning: Slide the clean, dry baffle filters back into their original positions.
5.2 Hreinsun að utan
The hood's exterior is made of stainless steel. To maintain its finish:
- Wipe surfaces regularly with a clean cloth dampendaði með volgu vatni og mildu þvottaefni.
- For stubborn stains, use a non-abrasive stainless steel cleaner, following the product's instructions.
- Always wipe in the direction of the grain to prevent scratching.
- Avoid using abrasive cleaners, steel wool, or harsh chemicals, as these can damage the finish.

Mynd 4: Hornlaga view of the Zephyr Siena ZSI-E36D, showcasing its stainless steel construction which requires specific cleaning methods.
6. Bilanagreining
If you encounter issues with your range hood, refer to the following common troubleshooting steps. For more complex problems, contact Zephyr customer support.
- Hettan kveikir ekki á sér: Check if the power cord is securely plugged in and if the circuit breaker has tripped.
- Fan is not operating or is weak: Ensure the fan speed is set correctly. Check if the baffle filters are clean and not obstructed. Verify that the ductwork is clear of blockages.
- Ljósin virka ekki: Check if the light button has been pressed. If individual lights are out, they may need replacement (consult the service manual or Zephyr support).
- Mikill hávaði: Ensure the hood is securely mounted. Check for loose parts or obstructions in the fan or ductwork.
7. Tæknilýsing
Detailed technical specifications for the Zephyr Siena ZSI-E36D Wall Mounted Range Hood.
| Eiginleiki | Forskrift |
|---|---|
| Vörumerki | Zephyr |
| Gerðarnúmer | ZSI-E36DS |
| Gerð uppsetningar | Veggfesting |
| Stjórntæki | Touch (ICON Touch® LCD) |
| Voltage | 120 volt |
| Þyngd hlutar | 55 pund |
| Tegund ljósgjafa | LED (LumiLight with TruHue™) |
| Hvaðtage | 480 vött |
| Síugerð | Baffli |
| Tegund loftræstingar | Ductless/Recirculating (with optional kit) |
| Tegund efnis | Ryðfrítt stál |
| Loftstreymisgeta | 650 rúmfet á mínútu (CFM) |
| Vörumál | 36 inches wide (Refer to installation guide for full dimensions) |
| UPC | 646328012303 |
8. Ábyrgð og stuðningur
For warranty information, please refer to the warranty card included with your product or visit the official Zephyr website. For technical assistance, parts, or service, please contact Zephyr customer support directly.
Þjónustuver Zephyr:
- Refer to your product documentation for contact details.
- Visit the official Zephyr webvefsíða fyrir stuðningsúrræði og upplýsingar um tengiliði.





