Mikilvægar öryggisupplýsingar
Please read and understand all instructions before installing or operating this water heater. Failure to follow these instructions may result in property damage, personal injury, or death.
- This appliance must be installed by a qualified plumber or electrician in accordance with all local codes and regulations.
- Gakktu úr skugga um að aflgjafinn passi við forskriftir tækisins (120V, 1440W).
- Do not operate the water heater if it is not filled with water.
- Install a temperature and pressure relief (T&P) valve as specified in the installation instructions.
- Ekki loka eða tamper with the T&P valve.
- Maintain proper clearances around the unit for ventilation and service.
- Aftengdu rafmagnið áður en viðhald eða þjónusta er framkvæmd.
Vara lokiðview
The Ranein WarmCube 2.5 Gallon Electric Mini Tank Water Heater is designed to provide instant hot water at the point of use, reducing wait times and conserving energy. Its compact design allows for versatile installation in various settings.
Helstu eiginleikar
- 2.5 gallon rúmmál: Stores heated water for immediate use.
- 1440W Heating Element: Provides rapid heating for on-demand hot water.
- Sterkur ryðfrítt stáltankur: Resists corrosion for extended product life.
- Triple-Layer Insulation: Features enamel coating, high-density insulation foam, and a reinforced decarburized steel plate for superior heat preservation and reduced energy loss.
- Stillanlegur hitastillir: Allows precise temperature control up to 85°C (185°F).
- Aukið öryggi: Includes high-temperature resistance, high-pressure resistance (up to 1.0 MPa), dry-burn protection, IPX4 waterproof rating, and advanced leakage prevention.
- Fjölhæf uppsetning: Can be installed under-sink, on a wall, or floor-mounted.
Íhlutir eininga
The water heater includes the main unit, a temperature and pressure relief (T&P) valve, mounting brackets, and screws.
Mynd: Framan view of the Ranein WarmCube 2.5 Gallon Electric Mini Tank Water Heater, showing the control knob and inlet/outlet connections.
Tæknilýsing
Detailed technical specifications for the Ranein WarmCube 2.5 Gallon Electric Mini Tank Water Heater.
| Forskrift | Gildi |
|---|---|
| Vörumerki | Ranein |
| Gerðarnúmer | RC25G-W |
| Getu | 2.5 lítra |
| Voltage | 120 volt |
| Hvaðtage | 1440 Watt |
| Hámarkshiti | 85°C (185°F) |
| Hámarksrekstrarþrýstingur | 100 PSI (1.0 MPa) |
| Vatnsheld einkunn | IPX4 |
| Vöruvíddir (B x H x D) | 13.39" x 13.39" x 11.42" |
| Þyngd hlutar | 17.63 pund |
| Gerð uppsetningar | Floor, Wall |
Image: Visual representation of the water heater's dimensions and key specifications, including capacity, voltage, power, max water pressure, weight, amperage, and waterproof grade.
Uppsetning
Fyrir uppsetningu
- Verify that the installation location is suitable for the unit's size and weight when full.
- Ensure access to a standard 120V electrical outlet.
- Confirm that water supply lines are accessible and can be connected to the unit.
- Slökkvið á aðalvatns- og rafmagninu á uppsetningarsvæðinu.
Uppsetningarvalkostir
The Ranein WarmCube 2.5 can be installed in several configurations:
- Under-Sink: Ideal for kitchens and bathrooms where space is limited.
- Veggfestur: Use the provided mounting brackets and screws to secure the unit to a sturdy wall surface.
- Floor-Mounted: Settu tækið á stöðugt, jafnt yfirborð.
Image: Depicts the water heater installed under a sink and wall-mounted in a bathroom vanity, illustrating versatile placement options.
Pípulagnatengingar
- Install the provided Temperature and Pressure (T&P) relief valve into the designated port on the top of the water heater. Ensure a watertight seal using appropriate sealant (e.g., PTFE tape).
- Connect the cold water inlet (blue port) to your cold water supply line.
- Connect the hot water outlet (red port) to your hot water faucet or fixture.
- Open the hot water faucet at the fixture to allow air to escape from the tank as it fills with water.
- Once water flows steadily from the hot water faucet, close the faucet. Check all connections for leaks.
Video: Demonstrates the installation of the pressure relief valve onto the Ranein mini tank water heater, showing the proper threading and tightening process.
Rafmagnstenging
- Plug the water heater's power cord into a grounded 120V electrical outlet.
- Ensure the outlet is dedicated and properly rated for the appliance's wattage (1440W).
Rekstur
Upphafleg gangsetning
- After plumbing and electrical connections are complete and checked, turn on the electrical power to the unit.
- The heating indicator light will illuminate, indicating that the water heater is actively heating the water.
- Allow sufficient time for the water to reach the desired temperature.
Hitastilling
- The water heater features a front-mounted rotary knob for temperature adjustment.
- Rotate the knob clockwise to increase the temperature and counter-clockwise to decrease it.
- The temperature range is typically between 55°F (13°C) and 145°F (63°C). Adjust to a comfortable and safe level.
- For energy efficiency, consider setting the temperature to the lowest comfortable setting.
Image: Illustrates the temperature adjustment knob on the water heater, with examples of suitable temperatures for various uses like washing dishes, vegetables, brushing teeth, and washing face.
Viðhald
Reglulegt viðhald tryggir bestu mögulegu virkni og lengir líftíma vatnshitarans.
Venjulegt viðhald
- Árleg skoðun: Have a qualified professional inspect the unit annually for any signs of wear, corrosion, or leaks.
- T&P lokaprófun: Test the T&P relief valve at least once a year by lifting the lever. Ensure water flows freely and then reseats properly. If it does not, replace the valve.
- Þrif að utan: Hreinsaðu ytra byrði einingarinnar með mjúku, damp klút. Ekki nota slípiefni.
Að tæma tankinn
If the unit will be unused for an extended period or if there is a risk of freezing, drain the tank:
- Turn off the electrical power to the water heater.
- Turn off the cold water supply to the unit.
- Opnaðu heitavatnskrana í nágrenninu til að létta á þrýstingnum.
- Carefully open the drain valve (if equipped) or disconnect the cold water inlet to allow the tank to drain.
- Once drained, leave the faucet open and the cold water inlet disconnected until ready to refill.
Úrræðaleit
Vísað er til töflunnar hér að neðan til að sjá algeng vandamál og mögulegar lausnir á þeim.
| Vandamál | Möguleg orsök | Lausn |
|---|---|---|
| Ekkert heitt vatn | No power; Thermostat set too low; Heating element failure | Check power supply/breaker; Adjust thermostat; Contact customer support |
| Vatn ekki nógu heitt | Thermostat set too low; High hot water demand; Cold water mixing | Increase thermostat setting; Allow time for recovery; Check for cross-connection |
| Vatn of heitt | Hitastillir settur of hátt | Decrease thermostat setting |
| Leki frá T&P loki | Excessive pressure; Faulty valve | Check water pressure; Replace T&P valve |
| Eining sem gerir hávaða | Setmyndun í tanki | Drain and flush the tank (refer to maintenance section) |
Ábyrgð og stuðningur
Ranein products are manufactured to high-quality standards and are backed by a limited warranty. Please refer to the warranty card included with your purchase for specific terms and conditions.
For technical assistance, troubleshooting beyond this manual, or warranty claims, please contact Ranein customer support through the retailer where the product was purchased or visit the official Ranein websíða fyrir upplýsingar um tengiliði.
