BERNY Automatic Titanium Watch AMT163MS-A User Manual

Inngangur

Thank you for choosing the BERNY Automatic Titanium Watch, Model AMT163MS-A. This timepiece combines a sleek design with robust titanium construction and a precise automatic movement. This manual provides essential information for the proper setup, operation, and maintenance of your watch to ensure its longevity and accurate performance.

Mynd: Framan view of the BERNY Automatic Titanium Watch AMT163MS-A, showcasing the black dial with white markers and titanium bracelet.

Uppsetning

1. Upphafleg vinding

Your BERNY automatic watch is powered by the motion of your wrist. If the watch has stopped or is low on power, it needs to be manually wound.

1. Unscrew the crown counter-clockwise until it springs out to position 0.
2. Turn the crown clockwise approximately 30-40 times. This will provide sufficient power reserve to start the watch.
3. Push the crown back in and screw it clockwise to secure it, ensuring water resistance.

2. Stilling á tíma og dagsetningu

Til að stilla réttan tíma og dagsetningu:

1. Unscrew the crown counter-clockwise until it springs out to position 0.
2. Til að stilla dagsetningu: Gently pull the crown out to position 1. Turn the crown clockwise or counter-clockwise to adjust the date. Avoid setting the date between 9 PM and 3 AM, as this can damage the movement.
3. Til að stilla tímann: Pull the crown out further to position 2. Turn the crown to move the hands clockwise until the correct time is displayed. Ensure the AM/PM is correctly set for the date change mechanism.
4. Once the time and date are set, push the crown back into position 0 and screw it clockwise firmly to ensure water resistance.

Mynd: Nærmynd view of the watch dial and crown, illustrating the components for time and date adjustment.

Notkun úrsins

Að bera úrið

The BERNY Titanium Watch features a double-lock clasp for secure wearing. To open, lift the safety clasp, then press the side buttons to release the main clasp. To close, align the two parts of the clasp and press firmly until both locks engage.

Mynd: View of the watch's back case and the open double-lock clasp on the titanium bracelet.

Water Resistance (10ATM / 100 Meters)

Your watch is water-resistant to 10 ATM (100 meters), making it suitable for swimming, snorkeling, and showering. However, it is not designed for scuba diving.

• Gakktu alltaf úr skugga um að krúnan sé alveg skrúfuð niður áður en úrið er sett í vatn.
• Ekki nota krónuna eða ýturnar á meðan úrið er blautt eða á kafi.
• Forðist að láta úrið komast í snertingu við heitt vatn eða gufu, því það getur skemmt innsiglin.

Ljósandi skjár

The watch hands and markers are coated with super-luminous material, allowing for readability in low-light conditions after exposure to light.

Image: The watch dial displaying its luminous hands and markers in a dark environment.

Viðhald

Þrif

To maintain the appearance of your titanium watch:

• Wipe the watch case and bracelet regularly with a soft, dry cloth.
• Fyrir þrjósk óhreinindi, notaðu örlítið damp cloth with mild soap, then rinse with clean water and dry thoroughly.
• Avoid harsh chemicals, solvents, or abrasive materials, as these can damage the titanium finish and sapphire crystal.

Sapphire Crystal Care

The anti-reflective (AR) coated sapphire crystal is highly scratch-resistant. While durable, it is not entirely scratch-proof. Avoid direct impact and contact with extremely hard surfaces.

Þjónusta

For optimal performance, it is recommended to have your automatic watch serviced by a qualified watchmaker every 3-5 years. This includes cleaning, lubrication, and checking the water resistance seals.

Úrræðaleit

• Watch Not Running or Stopping Frequently:

  Ensure the watch is sufficiently wound. If it has been stationary for a long period, manually wind it 30-40 times using the crown (as described in "Initial Winding"). Regular wear (8-10 hours a day) should keep the automatic movement powered.
• Date Not Changing at Midnight:

  This indicates the AM/PM setting is incorrect. Pull the crown to position 2 and advance the time by 12 hours. Then, reset the correct time and date.

• Condensation Under the Crystal:

  Small amounts of condensation that disappear quickly are usually normal. Persistent condensation or large droplets indicate a loss of water resistance. Immediately take the watch to a professional for inspection and repair to prevent internal damage.

• Ónákvæm tímamæling:

  Automatic watches can vary slightly in accuracy. If your watch is consistently gaining or losing significant time (e.g., more than +/- 30 seconds per day), it may require adjustment by a professional watchmaker.

Tæknilýsing

Image: Diagram illustrating the dimensions and key specifications of the BERNY AMT163MS watch.

Ábyrgð og stuðningur

For information regarding warranty coverage and customer support, please refer to the warranty card included with your purchase or visit the official BERNY website. If you encounter any issues not covered in this manual, please contact BERNY customer service for assistance.