ECOELER 6-Inch Motion Sensor LED Ceiling Light

1. Inngangur

Thank you for choosing the ECOELER 6-Inch Motion Sensor LED Ceiling Light. This manual provides detailed instructions for the safe installation, operation, and maintenance of your new lighting fixture. Please read this manual thoroughly before installation and retain it for future reference.

Mynd 1.1: Framan view of the ECOELER 6-Inch Motion Sensor LED Ceiling Light.

2. Öryggisupplýsingar

Til að draga úr hættu á eldsvoða, raflosti eða líkamstjóni skal alltaf fylgja þessum grunnöryggisráðstöfunum:

• VIÐVÖRUN: Hætta á raflosti. Taktu úr sambandi við öryggi eða aflrofa áður en uppsetning eða viðgerð er sett upp.
• Þessi vara verður að vera sett upp í samræmi við viðeigandi uppsetningarkóða af einstaklingi sem þekkir smíði og notkun vörunnar og hætturnar sem því fylgir.
• Use only 120V AC, 60Hz circuits.
• Ekki reyna að taka í sundur eða breyta festingunni. Það eru engir hlutar inni í henni sem notandinn getur gert við.
• Gakktu úr skugga um að allar tengingar séu öruggar og rétt einangraðar.
• Þessi festing hentar eingöngu til notkunar innandyra.

3. Innihald pakka

Gakktu úr skugga um að allir íhlutir séu til staðar áður en uppsetning hefst:

• 6-Inch Black Motion Sensor LED Ceiling Light (x1)
• Festingarbúnaður (skrúfur, vírmúfur)
• E26 Adapter Accessories (for recessed can installation)
• Leiðbeiningar (þetta skjal)

Image 3.1: Included accessories for installation.

4. Vörueiginleikar

• 3CCT Selectable: Choose between 3000K (Warm White), 4000K (Cool White), and 5000K (Daylight) color temperatures.
• Hreyfiskynjari: Passive Infrared (PIR) sensor detects motion within 9-16 feet.
• Stillanlegur tímatöf: Set the light to remain on for 30 seconds, 1 minute, or 5 minutes after motion ceases.
• Ljósskynjari: The motion sensor functions only in dark environments, remaining off during daylight hours.
• Orkusparandi: 16W LED provides 1000 lumens of brightness.
• Fjölhæf uppsetning: Compatible with 3.5 or 4-inch junction boxes and 5 or 6-inch recessed cans.

Image 4.1: Key features including PIR sensor, 3CCT, and time delay settings.

5. Uppsetning og uppsetning

Before installation, ensure the power supply is turned off at the circuit breaker.

5.1. Uppsetning tengikassa

1. Fjarlægðu linsuna með því að snúa henni réttsælis.
2. Connect the supply wires to the fixture wires using the provided wire nuts: black to black (live), white to white (neutral), and green/bare copper to green (ground).
3. Attach the fixture base to the junction box using the provided screws.
4. Twist the lens counter-clockwise to secure it back onto the fixture.

5.2. Recessed Can Installation

1. Fjarlægðu linsuna með því að snúa henni réttsælis.
2. Install the spring clips onto the fixture base using screws.
3. Connect the E26 adapter to the existing socket in the recessed can.
4. Connect the fixture wires to the E26 adapter wires using wire nuts.
5. Push the disk light into the recessed can until the spring clips secure it.
6. Twist the lens counter-clockwise to secure it back onto the fixture.

Image 5.1: Installation diagrams for junction box and recessed can.

6. Notkunarleiðbeiningar

After successful installation and restoring power, the light will be ready for operation. The ECOELER motion sensor light operates automatically based on ambient light and motion detection.

6.1. Virkni hreyfiskynjara

• Dagur: The light remains off even if motion is detected, due to the integrated light sensor.
• Nighttime/Dark Environments: The light will automatically turn on when motion is sensed within its detection range (approximately 9-16 feet).
• The light will turn off after the set time delay if no further motion is detected.

Image 6.1: Motion sensor operation during day and night.

6.2. Color Temperature (CCT) Adjustment

The fixture offers three color temperature options: 3000K (Warm White), 4000K (Cool White), and 5000K (Daylight). To adjust the CCT:

1. Gakktu úr skugga um að slökkt sé á rafmagninu.
2. Carefully remove the lens by twisting it clockwise.
3. Locate the CCT selector switch on the LED board (refer to Image 4.1).
4. Slide the switch to your desired color temperature setting (3000K, 4000K, or 5000K).
5. Replace the lens by twisting it counter-clockwise.
6. Restore power to test the new setting.

Image 6.2: Visual representation of 3CCT options.

6.3. Stilling tímaseinkunar

The light can be set to remain on for 30 seconds, 1 minute, or 5 minutes after motion is no longer detected. To adjust the time delay:

1. Gakktu úr skugga um að slökkt sé á rafmagninu.
2. Carefully remove the lens by twisting it clockwise.
3. Locate the time delay selector switch on the fixture (refer to Image 4.1).
4. Slide the switch to your desired time setting (30s, 1min, or 5mins).
5. Replace the lens by twisting it counter-clockwise.
6. Restore power to test the new setting.

Image 6.3: Time delay countdown feature.

7. Viðhald

The ECOELER LED ceiling light requires minimal maintenance.

• Þrif: Gakktu úr skugga um að rafmagnið sé slökkt áður en þú þrífur það. Þurrkaðu tækið með mjúkum, þurrum eða örlítið þurrum klút.amp cloth. Do not use harsh chemicals or abrasive cleaners, as they may damage the finish or electronic components.
• Linsa: Keep the lens clean to ensure optimal light output and motion sensor performance.

8. Bilanagreining

If you experience issues with your ECOELER LED ceiling light, refer to the following common problems and solutions:

9. Tæknilýsing

10. Ábyrgð og stuðningur

This ECOELER product is backed by a Limited Warranty. For specific warranty details and duration, please refer to the documentation included with your purchase or contact ECOELER customer support.

For technical assistance, troubleshooting, or warranty claims, please contact ECOELER customer support through the retailer where the product was purchased or visit the official ECOELER websíða.

Framleiðandi: ECOELER ELECTRIC INC