OXS A2

OXS Storm A2 Wireless Gaming Headset Instruction Manual

Gerð: A2

1. Inngangur

Thank you for choosing the OXS Storm A2 Wireless Gaming Headset. This manual provides detailed instructions for setting up, operating, and maintaining your headset to ensure optimal performance and longevity. The Storm A2 is designed for an immersive audio experience across various platforms, featuring advanced active noise cancellation, low-latency wireless connectivity, and versatile sound profiles.

2. Hvað er í kassanum

Vinsamlegast staðfestu að allir íhlutir séu til staðar í pakkanum þínum:

OXS Storm A2 Headset and included accessories

Image: The OXS Storm A2 headset displayed with all its included accessories, including the detachable microphone, charging cable, 2.4GHz dongle, user manual, and carrying bag.

3. Vöru lokiðview

3.1 Helstu eiginleikar

3.2 Stjórntæki og tengi fyrir heyrnartól

Close-up of OXS Storm A2 headset controls

Mynd: Ítarleg view of the OXS Storm A2 headset, highlighting the location of the volume controls, power switch, ANC button, USB-C charging port, and 3.5mm detachable mic port.

4. Uppsetning

4.1 Connecting via 2.4GHz Wireless Dongle

The 2.4GHz wireless dongle provides ultra-low latency audio for gaming on compatible devices.

  1. Kveiktu á höfuðtólinu með því að ýta á rofann.
  2. Connect the included 2.4GHz wireless dongle to your computer's USB-A or USB-C port for automatic low-latency audio.
  3. For Nintendo Switch: Plug the dongle's USB-A connector directly into the Switch dock's USB port. Alternatively, connect the dongle directly to the Switch console's USB-C port (undocked mode) using the dongle's USB-C connector.
  4. For PlayStation consoles (PS4/PS5): Connect the dongle's USB-A end to the front or rear USB port.
  5. When only the dongle is connected, the headset automatically switches to the dongle audio source. During simultaneous dongle/Bluetooth connections, incoming calls automatically prioritize Bluetooth. For non-call situations, hold the ANC button for 1 second to prioritize the 2.4GHz connection.

Video: This video demonstrates the unboxing of the OXS Storm A2 headset and provides a quick start guide for connecting the device via the 2.4GHz wireless dongle to various platforms like PC, Nintendo Switch, and PlayStation consoles.

4.2 Tengist með Bluetooth

For connecting to mobile devices or other Bluetooth-enabled systems:

  1. Turn on the headset. It automatically enters pairing mode with a blue LED blinking if no previous connection exists.
  2. Select "OXS Storm A2" in your device's Bluetooth menu to pair.
  3. Connection is confirmed when the blue LED changes from blinking to solid.

Video: This video demonstrates the unboxing of the OXS Storm A2 headset and provides a quick start guide for connecting the device via Bluetooth to mobile devices.

5. Notkunarleiðbeiningar

5.1 Noise Cancelling Control

Cycle through noise control modes by single-pressing the ANC button:

5.2 EQ Switching (Surround and Standard Sound)

Double-press the ANC button to toggle between two EQ presets:

5.3 Source Switching (2.4GHz and Bluetooth Audio)

Hold the ANC button for 1 second to switch audio sources between 2.4GHz wireless ("Dongle Mode") and Bluetooth ("Bluetooth Mode").

5.4 Spilunarstýringar

Video: This video demonstrates the unboxing of the OXS Storm A2 headset and provides a quick start guide for controlling noise cancellation, EQ modes, audio source switching, and playback controls.

6. Viðhald

6.1 Headphone Folding and Packing

To store or transport your headset, rotate both earcups inward until they lock flat. Then, place the folded headset in the included carrying bag.

Video: This video demonstrates how to properly fold the OXS Storm A2 headset and pack it into its carrying bag for storage or travel.

6.2 Þrif

7. Bilanagreining

VandamálMöguleg orsökLausn
No audio/connection via 2.4GHz dongleDongle not properly inserted; headset not in dongle mode; driver issue.Ensure dongle is fully inserted. Hold ANC button for 1 second to switch to dongle mode. Check device audio settings.
No audio/connection via BluetoothHeadset not in pairing mode; device Bluetooth off; out of range.Ensure headset is on and blue LED is blinking. Turn on device Bluetooth and select "OXS Storm A2". Move closer to the device.
Hljóðnemi virkar ekkiMicrophone not properly connected; muted; incorrect audio input settings.Ensure detachable mic is fully inserted. Check if mic is muted. Verify audio input settings on your device.
Léleg hljóðgæðiLow battery; incorrect EQ mode; interference.Charge the headset. Double-press ANC button to cycle EQ modes. Move away from potential interference sources.
Headset turns off when chargingThis is expected behavior for the headset.The headset is designed to turn off when plugged in for charging. It cannot be used wirelessly while charging.

8. Tæknilýsing

EiginleikiSmáatriði
VörumerkiOXS
Nafn líkansA2
TengitækniWireless (Bluetooth 5.4 & 2.4GHz)
HávaðastýringVirk hávaðaeyðing
RafhlöðuendingAllt að 70 klst
Töf á hljóði180 Milliseconds (Bluetooth), <20ms (2.4GHz)
Gerð hljóðbílstjóraDynamic bílstjóri
Stærð hljóðbílstjóra40 millimetrar
Tíðni svörun20 KHz
Næmi100 dB
Lögun heyrnartólsYfir Eyra
EfniPlast
Samhæf tækiPS4, PS5, PC, Switch, Mobile Devices
HljóðnemiDetachable, 5-mic system with noise reduction

9. Ábyrgð og stuðningur

OXS products are designed and manufactured to the highest quality standards. For detailed warranty information and customer support, please refer to the warranty card included in your product packaging or visit the official OXS websíða.

If you encounter any issues or have questions regarding your OXS Storm A2 headset, please contact our customer support team for assistance.

Tengd skjöl - A2

Preview Notendahandbók fyrir OXS GH02 þráðlaus heyrnartól
Notendahandbók fyrir OXS GH02 þráðlaus heyrnartól, sem fjallar um uppsetningu, 2.4 GHz og Bluetooth tengingu, snúrubundna stillingu, símtalsmeðhöndlun, hljóðstillingar og lýsingu.
Preview Notendahandbók og uppsetningarleiðbeiningar fyrir OXS S3 hljóðstikuna
Ítarleg notendahandbók fyrir OXS S3 hljóðstikuna, sem fjallar um uppsetningu, tengingar (USB, ljósleiðara, koaxial, AUX), notkun fjarstýringar, stöðuljós og Bluetooth-pörun. Inniheldur uppsetningarleiðbeiningar og ráð um bilanagreiningu.
Preview Leiðbeiningar um uppfærslu á hugbúnaði fyrir OXS Thunder Pro
Opinber handbók um uppfærslu á hugbúnaði hljóðstikunnar OXS Thunder Pro. Lærðu hvernig á að undirbúa USB-drifið, framkvæma uppfærsluna og leysa algeng vandamál.
Preview Notendahandbók fyrir OXS Storm A2
Ítarleg notendahandbók fyrir OXS Storm A2 heyrnartólin, þar á meðal uppsetning, eiginleika, stjórntæki og bilanaleit.
Preview Notendahandbók fyrir OXS S3 hljóðstikuna, útgáfa 1.0
Ítarleg notendahandbók fyrir OXS S3 hljóðstikuna, þar á meðal uppsetning, tengingar (USB, ljósleiðari, AUX, koaxial), Bluetooth-pörun, fjarstýringaraðgerðir og hljóðstillingar. Hægt er að hlaða niður handbók.
Preview Notendahandbók fyrir OXS S2 hljóðstikuna: Uppsetning, tengingar og notkun
Ítarleg notendahandbók fyrir OXS S2 hljóðstikuna, sem fjallar um uppsetningu, uppsetningu tækja, fjarstýringarvirkni, tengingar hljóðgjafa (HDMI, ljósleiðari, hliðrænn, Bluetooth, USB-C) og skiptingu á inntaksgjafa. Inniheldur leiðbeiningar fyrir PC og MAC notendur.