Oxseryn OXCAHV05

Oxseryn OXCAHV05 Cordless Rechargeable Pool Vacuum Instruction Manual

Model: OXCAHV05

Inngangur

Thank you for choosing the Oxseryn OXCAHV05 Cordless Rechargeable Pool Vacuum. This manual provides essential information for the safe and efficient use, maintenance, and troubleshooting of your new pool cleaner. Please read these instructions carefully before operating the device and retain them for future reference.

Mikilvægar öryggisupplýsingar

Vöruhlutir

The Oxseryn OXCAHV05 pool vacuum consists of several key components:

Diagram showing the individual components of the Oxseryn pool vacuum: Filter Tube, Vacuum Body, Handle, Connection Tube sections, and Brush Head.

Figure 1: Individual components of the Oxseryn OXCAHV05 pool vacuum.

Uppsetning og samsetning

1. Samkoma

Fylgdu þessum skrefum til að setja saman sundlaugarryksuguna þína:

  1. Connect the filter tube to the vacuum body by twisting until secure.
  2. Festið handfangið við ryksuguna.
  3. Connect the desired number of connection tubes to achieve the required length. The pole can extend up to 160 cm (approximately 5.25 feet). For longer reach in in-ground pools, the vacuum can connect to a standard telescopic pole (not included).
  4. Attach either the brush head (for general cleaning of steps and floors) or the vacuum head (for corners and tight spaces) to the end of the connection tube.
Step-by-step diagram illustrating the assembly of the pool vacuum, showing how the filter tube, vacuum body, handle, and connection tubes fit together.

Figure 2: Simple assembly steps for the pool vacuum.

Image showing a person using the assembled pool vacuum with an adjustable aluminum rod, demonstrating its reach in an above-ground pool.

Figure 3: The adjustable aluminum rod allows for extended reach up to 7.5 feet.

2. Hleðsla rafhlöðunnar

The vacuum is powered by a 4000mAh lithium battery. Before first use, fully charge the battery.

Video demonstrating the charging process of the cordless pool vacuum, showing how to connect the charger and the indicator light status.

Video: Charging the Oxseryn Cordless Pool Vacuum (3:35)

Notkunarleiðbeiningar

1. Kveikja / slökkva á

The vacuum features a water-activated sensor. Simply submerge the vacuum in water to activate it. It will automatically turn off after 60 seconds when removed from water to protect the device and conserve battery life.

2. Cleaning Your Pool or Spa

The Oxseryn OXCAHV05 is suitable for above-ground pools, in-ground pools, hot tubs, and spas.

Diagram illustrating two cleaning methods: using the removable brush head for pool steps and floors, and the vacuum head for hard-to-clean corners.

Figure 4: Two ways to suck and clean using different vacuum heads.

Video demonstrating the effective cleaning of a pool using the Oxseryn cordless vacuum, highlighting its strong suction and maneuverability.

Video: Pool Cleaning Demonstration (1:36)

Viðhald

1. Þrif á síunni

Regularly clean the 125-micron filter to maintain optimal suction and performance.

  1. After each use, remove the filter tube from the vacuum body.
  2. Carefully remove the filter cartridge.
  3. Rinse the filter thoroughly under running water to remove collected debris such as sand, small leaves, twigs, and dirt.
  4. Ensure the filter is completely clean before reinserting it.
  5. Reassemble the filter tube and vacuum body.
Image showing a hand rinsing the 125-micron filter under running water, with illustrations of various debris types it captures like sand, small leaves, and dirt.

Figure 5: Cleaning the 125-micron filtration system.

2. Geymsla

When not in use, store the vacuum in a cool, dry place, away from direct sunlight and extreme temperatures. Ensure the battery is charged periodically if stored for long durations to prolong its lifespan.

Úrræðaleit

VandamálMöguleg orsökLausn
Ryksugun kveikir ekki á sér.Not submerged in water. Battery is depleted.Ensure the vacuum is fully submerged. Charge the battery for 4.5 hours.
Minni sogkraftur.Filter is clogged with debris. Obstruction in the vacuum head or intake.Clean the filter thoroughly as per maintenance instructions. Check and clear any blockages in the vacuum head or intake.
Rafhlaða hleðst ekki.Charger not properly connected. Charging port is wet. Faulty charger or battery.Ensure charger is securely connected and plugged into a working outlet. Dry the charging port completely before connecting. Contact customer support if the issue persists.
Ryksugurinn slokknar óvænt.Battery is low. Vacuum removed from water for too long.Recharge the battery. Ensure continuous submersion during operation.

Tæknilýsing

Ábyrgð og stuðningur

For warranty information, please refer to the documentation provided at the time of purchase or contact your retailer. If you encounter any issues or require technical assistance, please contact Oxseryn customer support through your purchase platform or the official brand websíða.