Notendahandbók fyrir Baseus BS1 NC hálf-í-eyra hávaðadeyfandi heyrnartól

1. Vöru lokiðview

The Baseus BS1 NC Semi-in-Ear Noise Cancelling Earbuds offer a blend of comfort and advanced audio technology. Featuring Adaptive Hybrid Active Noise Cancellation (ANC), Hi-Res Audio with LDAC support, and a lightweight design, these earbuds are engineered for extended listening and clear communication. They are also equipped with a 6-microphone AI system for clear calls and IP55 water and dust resistance.

Image: Baseus BS1 NC Semi-in-Ear Noise Cancelling Earbuds and their charging case in black.

2. Innihald pakka

Gakktu úr skugga um að allir hlutir séu til staðar í pakkanum:

• Baseus Bass BS1 NC Semi-in-Ear Earbuds (Left and Right)
• Hleðslutaska
• USB-C hleðslusnúra
• Flýtileiðarvísir

Image: The complete retail package for the Baseus BS1 NC Earbuds, showing the earbuds, charging case, USB-C cable, and quick start guide.

3. Hleðsla eyrnatólanna og hulstrsins

For optimal performance, fully charge the earbuds and charging case before first use.

3.1 Hleðsla heyrnartólanna

1. Settu eyrnatólin í hleðsluhulstrið. Gakktu úr skugga um að þau séu rétt sett í viðeigandi raufar (L fyrir vinstri, R fyrir hægri).
2. Close the charging case. The earbuds will begin charging automatically.

3.2 Hleðsla á hylki

1. Tengdu meðfylgjandi USB-C hleðslusnúruna við hleðslutengið á hulstrinu.
2. Tengdu hinn endann á snúrunni við USB-straumbreyti (fylgir ekki með) eða USB-tengi tölvu.
3. The LED indicator on the case will show the charging status:
   • Grænn: 75% - 100% hleðsla
   • Yellow: 25% - 75% hleðsla
   • Rauður: Below 25% charged
4. A full charge for the case provides up to 40 hours of total playtime for the earbuds (with ANC off). A 10-minute charge can provide up to 2 hours of playback.

Image: The Baseus BS1 NC Earbuds resting in their open charging case, highlighting the 40-hour total playtime and rapid charging capabilities.

4. Pörun og tengingar

4.1 Upphafleg pörun

1. Opnaðu hleðsluhulstrið. Eyrnatólin fara sjálfkrafa í pörunarstillingu.
2. Virkjaðu Bluetooth í tækinu þínu (snjallsíma, spjaldtölvu, tölvu).
3. Leitaðu að "Baseus Bass BS1 NC" in the list of available Bluetooth devices.
4. Select "Baseus Bass BS1 NC" to connect. A voice prompt will confirm successful pairing.

4.2 Sjálfvirk endurtenging

Once paired, the earbuds will automatically reconnect to the last connected device when removed from the charging case and within Bluetooth range.

4.3 Fjölpunktatenging

The Baseus BS1 NC supports Baseus Smart-Connect (BSC) technology, allowing simultaneous connection to two devices. This enables seamless switching between audio sources without manual re-pairing.

To use multipoint connection:

1. Paraðu eyrnatólin við fyrsta tækið þitt.
2. Aftengdu eyrnatólin frá Bluetooth-stillingum fyrsta tækisins (ekki aftengja).
3. Paraðu eyrnatólin við annað tækið þitt.
4. Tengdu eyrnatólin aftur við fyrsta tækið úr Bluetooth-stillingunum. Eyrnatólin ættu nú að vera tengd við bæði tækin.

Hljóðið skiptir sjálfkrafa yfir í tækið sem spilar efni eða tekur við símtali.

Image: A visual representation of the Baseus BS1 NC Earbuds connected to both a laptop and a smartphone, showcasing the instant multipoint connection feature.

5. Að nota eyrnatólin

The Baseus BS1 NC earbuds feature a semi-in-ear design for comfortable, pressure-free wear. For optimal sound quality and noise cancellation, ensure a proper fit.

1. Þekkja vinstri (L) og hægri (R) heyrnartól.
2. Settu hvert eyrnatappa varlega inn í eyrnagöngin.
3. Adjust the earbud until it feels secure and comfortable. The stem should point slightly forward or downward.

Image: A person wearing the Baseus BS1 NC Earbuds, illustrating their ergonomic and lightweight design for all-day comfort.

6. Notkunarleiðbeiningar

6.1 Snertistýringar

The earbuds feature intuitive touch controls on their stems. The following are default functions, which may be customizable via the Baseus app:

Image: An illustration detailing the intuitive touch controls on the Baseus BS1 NC Earbuds for various functions like play/pause, call management, noise reduction, and voice assistant activation.

6.2 Hávaðastýringarstillingar

The Baseus BS1 NC earbuds offer three noise control modes:

• Adaptive Hybrid ANC (Active Noise Cancellation): Reduces ambient noise for an immersive listening experience. Ideal for noisy environments.
• Gagnsæi háttur: Allows you to hear your surroundings while still enjoying your audio. Useful for awareness in urban settings or conversations.
• Venjulegur háttur: Standard audio playback without active noise cancellation or transparency features.

Switch between modes by pressing and holding the touch area on either earbud for 2 seconds.

Image: A cutaway diagram of a Baseus BS1 NC earbud in an ear, illustrating the semi-in-ear fit and the availability of Adaptive Noise Cancelling and Transparency Mode.

6.3 Hi-Res hljóð með LDAC

These earbuds support LDAC technology, enabling high-resolution audio transmission for a detailed and rich sound experience. Ensure your device supports LDAC and activate it in your device's Bluetooth settings for the best audio quality.

Image: The Baseus BS1 NC Earbuds surrounded by sound waves, emphasizing features like Hi-Res Audio, SuperBass 2.0, and 13mm dynamic drivers for powerful sound.

6.4 6-Mic AI Clear Calls

The earbuds are equipped with 6 microphones and AI noise isolation technology to ensure your voice is clear during calls, even in noisy environments. Wind noise reduction further enhances call clarity outdoors.

Image: A detailed diagram of the Baseus BS1 NC earbud, highlighting the placement of the FF-Mic, FB-Mic, and Talk-Mic, which contribute to the 6-Mic AI Clear Call technology and wind-noise blocking design.

6.5 Snjallforritastýring

Download the dedicated Baseus app for enhanced control and customization options. The app allows you to:

• Adjust Bass Boost levels.
• Select from various EQ Modes.
• Control Spatial Acoustics settings.
• Notaðu aðgerðina „Finndu eyrnatólin þín“.

Note: In guest mode, no account creation or permissions are required to customize features, but GPS access is needed to locate lost earbuds.

Image: A smartphone displaying the Baseus app interface, which offers various sound control options including Bass Boost, EQ Modes, Spatial Acoustics, and a "Find Your Earbuds" function.

7. Viðhald og umönnun

7.1 Þrif

• Hreinsið eyrnatappa og hleðsluhulstur reglulega með mjúkum, þurrum og lólausum klút.
• Ekki nota sterk efni, hreinsiefni eða sterk þvottaefni.
• Gently remove any earwax or debris from the earbud mesh and charging contacts using a small, soft brush or cotton swab.

7.2 Vatns- og rykþol (IP55)

The earbuds are rated IP55, meaning they are protected against limited dust ingress and low-pressure water jets from any direction. This makes them suitable for workouts and light rain exposure.

• Ekki setja eyrnatólin í vatn.
• Gakktu úr skugga um að eyrnatólin séu þurr áður en þau eru sett aftur í hleðsluhulstrið til að koma í veg fyrir skemmdir á hleðslutengjunum.
• Hleðslutækið er ekki vatnshelt.

Image: The Baseus BS1 NC Earbuds shown with water droplets, signifying their IP55 rating for dust and water resistance.

7.3 Geymsla

Geymið heyrnartólin í hleðslutöskunni þegar þau eru ekki í notkun til að vernda þau og halda þeim hlaðnum.

8. Bilanagreining

If you encounter issues with your Baseus BS1 NC earbuds, refer to the following common solutions:

• Engin hljóð-/tengingarvandamál:
  • Gakktu úr skugga um að eyrnatólin séu hlaðin.
  • Verify Bluetooth is enabled on your device and "Baseus Bass BS1 NC" is selected.
  • Try placing earbuds back in the case, closing it, and then reopening to reset the connection.
  • Gleymdu tækinu í Bluetooth stillingunum þínum og paraðu aftur.
• Eitt heyrnartól virkar ekki:
  • Gakktu úr skugga um að bæði heyrnartólin séu hlaðin.
  • Place both earbuds back in the case, close, and reopen.
  • Hreinsið hleðslutengi báða eyrnatólanna og inni í hulstrinu.
• Léleg hljóðgæði:
  • Gakktu úr skugga um að eyrnatólin séu rétt sett í eyrunum.
  • Hreinsið möskva eyrnatappa til að fjarlægja allar hindranir.
  • Check your device's audio settings and ensure LDAC is enabled if supported.
• ANC virkar ekki:
  • Ensure ANC mode is activated via touch control or the Baseus app.
  • Adjust the earbuds for a better seal in your ears.

9. Tæknilýsing

10. Opinbert vörumyndband

Watch the official product video for a visual guide on the Baseus BS1 NC Earbuds:

11. Ábyrgð og stuðningur

For warranty information, technical support, FAQs, and further assistance, please visit the official Baseus support center.

Refer to the Quick Start Guide included in your package for a direct link or visit the Baseus websíða.

Note: Protection plans may be available for purchase separately.