Eliot Lio Plus snjallstýring

Vörulýsing:

• Vöruheiti: Eliot Original Smartcontroller
• Íhlutir: 3-fach Memory-Bedienteil (memory handset), 1 Bedienteil (Handset), Schrauben (Screws 5*16 x2), Werkzeuge (Tools)
• Ábyrgð: 2 ár
• Fyrirhuguð notkun: Dry office areas

Notkunarleiðbeiningar fyrir vöru

Grunnaðgerðir:

• Drehung im Uhrzeigersinn – AUF (snúningur réttsælis – UPP)
• Drehung gegen Uhrzeigersinn – AB (Anti-clockwise rotation – DOWN)

Saving Height Position:

1. Fyrst skaltu færa borðið í þá hæð sem á að vista.
2. Ýttu á M til að fara inn í minnisviðmótið.
3. Veldu einn af hnöppunum 1, 2 eða 3 til að vista hæðina.

Selecting Saved Height Position:
Press memory button 1, 2, or 3 and the desk will move to the desired position. Keep the button pressed until the position has been reached. The display shows the current table height during the procedure.

Kyrrsetuáminning:

1. Press the M button for up to 5 seconds until the display shows the graphic above.
2. Ýttu aftur á M hnappinn til að fara í stillingaviðmótið.
3. Select a time interval or the turn off option using the 1 and 3 buttons.
4. Ýttu á M hnappinn til að staðfesta.

Öryggislás:
Select the locking interface graphic above from the menu and press M to enter. Use the 1 or 3 buttons to select locking or unlocking. Press M again to confirm.

Valmyndarleiðsögn:
To navigate through the menu, use buttons 1 and 3 to scroll left or right. Press M to select the desired function.

Hlutar

1. Símtól

Skrúfur

Verkfæri

 

Samsetningarhandbók

SKREF 1
Using one of the two screws supplied with the frame, attach the handset to one of the predrilled holes on the underside of the desktop. Then insert the second screw directly into the desktop, applying some pressure to make a new hole. Please note that you can install the handset to the left or right side of the desktop

Skref 2
Connect handset to control box using the supplied cable, and securing the excess cable.

Ábyrgð og ábyrgð

Ábyrgð: 2 ár
This smartcontroller is designed for use in dry office areas only.
Öll önnur notkun er á eigin ábyrgð notandans.
Framleiðandinn samþykkir ekki undir neinum kringumstæðum ábyrgðarkröfur eða skaðabótakröfur vegna tjóns sem stafar af óviðeigandi notkun eða meðhöndlun stjórnandans.

Varúð!
Ef þessum leiðbeiningum er ekki fylgt getur það leitt til slysa sem geta valdið alvarlegum meiðslum á fólki.

Varúð / öryggisleiðbeiningar

1. Make sure to have followed all caution/safety instructions from the Eliot height adjustable desk original user & assembly instructions.
2. When using the smartcontroller, the user must pay full attention and make absolutely sure that no person can be injured, or object damaged, in the process.
3. If the product is visibly damaged, it may not be installed or used.
4. Geymið alla rafhluta frá vökva.
5. Do not open any of the electrical components. There is a danger of electrical shock.
6. Any changes made to the standard configuration of the handset will invalidate all liability or warranty claims.

Allir sem bera ábyrgð á þessu borði, við uppsetningu eða notkun þess, daglega notkun eða við viðhald og viðgerðir, verða að hafa aðgang að þessum leiðbeiningum og lesa þær vandlega. Geymið þessar leiðbeiningar nálægt hæðarstillanlegu borðinu.

Viðmót

 

Grunnaðgerðir

Lyftingaraðgerð

• UP
  Clockwise rotation – desk moves up
• NIÐUR
  Anti-clockwise rotation – desk moves down

Minni eiginleiki

Saving height position

1. Fyrst skaltu færa borðið í þá hæð sem á að vista.
2. Press “M” to enter the memory interface.
3. Select one of the buttons “1”, ”2”, or “3” to save the height.

Selecting saved height position
Press memory button “1”, “2” or “3” and the desk will move to the desired position.
Keep the button pressed until the position has been reached.
The display shows the current table height during the procedure.

Valmynd fyrir háþróaða aðgerðir

Farðu inn í valmyndina
Ýttu á „M“ hnappinn í allt að 5 sekúndur þar til skjárinn sýnir myndina hér að neðan.

Matseðill

• 1/5 Sedentary reminder function
• 2/5 Locking interface
• 3/5 Setting the upper & lower limit position
• 4/5 Vibration mode selection
• 5/5 Exit

Vinsamlega athugið
Use the “1” and the “3” buttons to scroll left or right through the menu.
Then press ”M” to select the desired function.

Kyrrsetu áminning

1. Press the “M” button for up to 5 seconds until the display shows the graphic above.
2. Touch the “M” button again to enter the settings interface.
3. There are 3 different time intervals to choose from, or the turn off option. Select preference by navigating with the “1” and “3” buttons.
4. Ýttu á "M" hnappinn til að staðfesta.

After setting successfully the display will confirm showing a “√”.
Then the display will show the set height and a progress bar for the timer.
When the set time is over, the desk will vibrate for 10 seconds.
The timer will reset when the desk has moved above 100 cm (39.5inch).

Öryggislás
Select the locking interface graphic above from the menu and press “M” to enter.
Use the “1” or “3” buttons to select locking or unlocking. Press “M” again to confirm.

After successful locking, the display will show “√”, and will display the lock icon as seen here below.

• a) Entering lock mode, controller can still be used.
• b) Appears after 5 seconds, controller is now locked.

Temporary unlock
Press the button sequence “1”, “2”, and “3” to unlock the controller temporarily. You can now make changes to the height or in the menu.
After 5 seconds the display (b) will appear and the controller will return to lock mode

Ef þú stillir áminningu og lás á sama tíma, þá birtast bæði táknin á skjánum, eins og sést hér.

Setting the upper & lower limit position

1. Move the desk to the desired maximum or minimum height position.2. Press the “M” button for up to 5 seconds to enter the menu.
2. Select the setting upper & lower limit position interface graphic shown above from the menu and press “M” to enter.
3. Use the “1” or “3” buttons to select upper limit or lower limit position or to cancel the upper/lower limits.

Ýttu á "M" hnappinn til að staðfesta.

Þegar borðið er fært í lágmarks- eða hámarkshæðarstöðu mun viðmótið gefa áminningu eins og sýnt er hér að neðan:

Val á titringsstillingu

1. Press the “M” button for up to 5 seconds to enter the menu.
2. Select the vibration mode selection graphic shown above from the menu and press “M” to enter.
3. Use the “1” or “3” buttons to select the preferred vibration option or to switch off the vibration.
4. Ýttu á "M" hnappinn til að staðfesta.

Hætta
Til að fara úr valmyndinni skaltu velja myndina fyrir útgönguvalmyndina sem sýnd er hér að ofan og ýta á „M“ til að staðfesta.

Error code and reset status menu

When the display shows an error code, it most likely needs to be reset. Please follow this procedure:

1. Rotate the wheel anti-clockwise until the desk has reached it’s lowest position.
2. Then release the wheel shortly.
3. Then rotate the wheel anti-clockwise again for up to 5 seconds until the display changes to “RESET”.
4. Release the wheel.
5. Once again, rotate the wheel anti-clockwise until the desk lowers a little more and slightly rises. The display should now display the actual height.
6. The desk has been reset and is now ready for use again .

If the reset does not resolve the problem and there is still an error code, please contact:
support@smartfurniture.de

www.eliotfurniture.com | support@smartfurniture.de

Algengar spurningar

Can the smartcontroller be used in wet environments?

No, this smartcontroller is designed for use in dry office areas only.

Hversu lengi er ábyrgðin fyrir þessa vöru?

Ábyrgðartíminn er 2 ár.

Skjöl / auðlindir

Eliot Lio Plus snjallstýring [pdfLeiðbeiningarhandbók Lio Plus snjallstýring, Lio Plus, snjallstýring, stýring

Heimildir

• Notendahandbók