GRID BROWS LED Brows
ÁÐUR EN ÞÚ BYRJAR
Thank you for your purchase. In this manual we will provide you with the means to get started using your new GRID product!
Similarly used in all forms of real motorsports racing, GRID Brows are a much needed expansion for any dash. With 18 programmable LEDs the possibilities are endless with multiple uses such as spotter info, slip/lock, TC and ABS. (depending on the sim used).
Augabrúnir
Eiginleikar
- CFRP enclosures
- 2x 9 RGB LEDs
- RaceDirector compatible
Carbon fiber mounting brackets
Mounting the brows
To be able to mount the brows, we have included carbon fiber mounting brackets. Here is how we suggest to use them, though you can orient them the way you like to suit your cockpit or preference.
Be sure to use bolt (A8) to fasten the mounting bracket (A3) to a brow (A1). 
Í þessu frvample we are mounting the brows and control box to the uprights of a cockpit. Of course you are free to mount them how and where you see fit.
Since the brows are daisy-chained together, the first brow unit in the chain is considered the ‘first’ one, defaults to being the left brow. Therefore it makes sense to mount the control box on the left side of the cockpit. Of course, you are free to install these parts how you like to.
All bolts (A7) and slot-nuts (A9) shown are of the same size/type.
Connecting the brows
As mentioned on the previous page, the brows are daisy chained to each other and to the control box. Provided are two brow cables, a short (A6) and long (A5) one, next to the USB cable (A4). To wire the control box to the first brow in the chain, we recommend using the short cable (A6). The long cable (A5) will connect the two brow modules together.
Attention! Be mindful of the way you connect the modules to each other, always go from an ‘OUT’ to an ‘IN’. For the second brow module, ‘OUT’ can be used to connect a third and fourth module. A maximum of four modules in total is supported.
Both brow modules are identical, it doesn’t matter in which order you connect them to each other or to the control box. 
Race Director
- Download and install the lastest version of RaceDirector from www.sim-lab.eu/srd-setup
- For explanation on how to install and use RaceDirector, please read the manual. This can be found here: www.sim-lab.eu/srd-manual
- Við munum nú fara yfir grunnatriðin til að komast af stað með því að nota RaceDirector til að koma þér á réttan kjöl eins fljótt og auðið er. Við hvetjum þig virkilega til að fara í gegnum handbókina til að fá ítarlegri útskýringu á þeim möguleikum sem RaceDirector hefur upp á að bjóða.
- Fyrst þurfum við að virkja vöruna, þetta er gert á 'Stillingar' (1) síðunni.
- Tick the ‘Activate’ tickbox next to ‘GRID Brows’ (2) and its icon (3) should appear on the left side of the screen. Selecting the icon (3) will take us to its device pages.
Tækjasíður
These pages allow you to control, configure and update your device. To keep this manual concise, we only go over the basics or unique functions.
LEDS (A)
All of these options are identical to the LEDs device page for other devices, although there is one additional option which is unique for the Brows and DDU5 V2. 
The Brows V2 can be daisy chained together, allowing up to 4 brow modules to be connected (1) in total. Please be aware your profiles need to be custom made to suit your needs here. Our default profile is made for the base pair as packaged.
For more information on connectivity, please refer to Page 6 of this manual.
FIRMWARE (B)
On this page you can see the current firmware loaded on the device. If your firmware is out of date, we recommend to update it.
RaceDirector fylgist með núverandi vélbúnaðarútgáfum. Þegar það finnur mun, tilkynning 
mun láta þig vita að nýlegri fastbúnaður hefur fundist. 
Þegar uppfærð vélbúnaðarútgáfa hefur fundist skaltu fylgja leiðbeiningunum og smella á hnappinn „Framkvæma uppfærslu“ (1).
RaceDirector mun sýna framvinduna og sjá um uppfærsluna fyrir þig. Ef þú sérð Windows Explorer eða USB-tæki birtast, ekki hafa áhyggjur, það er hluti af ferlinu.
Eldri tæki gætu enn þurft fyrra uppfærslutólið fyrir vélbúnað. Í því tilfelli mun RaceDirector segja þér hvað þú átt að gera.
Simhub stuðningur
For advanced users, we do still support people who prefer using Simhub. When adding a device, choose the ‘GRID Brows V2’ device.. 
Breyting á virkni LED.
To change the LED effects you need to know their numbering to identify them on the modules. The following schematic shows the LED numbering for treference. 
Það ætti að vera nægar upplýsingar í meðfylgjandi sjálfgefna LED profiles til að geta stillt LED stillingar að þínum smekk. Til að byrja að byggja upp þinn eigin atvinnumannfile, mælum við með að afrita núverandi og breyta þar sem þörf krefur. Advaninntage er að þú ert alltaf með öryggisafrit af sjálfgefna atvinnumanninumfile að falla aftur til.
Athugið: vegna vandamála/bilanaleitar í Simhub pro tækinu þínufileVinsamlegast skoðið skjölun fyrir Simhub eða aðstoð við Simhub.
Efnisskrá
| Í KASSINUM | |||
| # | Hluti | Magn | Athugið |
| A1 | Brow | 2 | |
| A2 | Stjórnkassi | 1 | Interface to PC. |
| A3 | Festingarfesting | 2 | |
| A4 | USB-A snúru | 1 | |
| A5 | Brow cable long | 1 | Use between brows. |
| A6 | Brow cable short | 1 | |
| A7 | Boltinn M5 X 14 DIN 7380 | 2 | |
| A8 | Boltinn M5 X 8 DIN 7380 | 4 | |
| A9 | Raufhneta M5 | 4 | |
Frekari upplýsingar
Ef þú hefur enn einhverjar spurningar varðandi samsetningu þessarar vöru eða um handbókina sjálfa, vinsamlegast hafðu samband við þjónustudeild okkar. Hægt er að ná í þá á: support@sim-lab.eu
Alternatively, we have a Discord server where you can hang out or ask for help. www.sim-lab.eu/discord
Skjöl / auðlindir
 |
GRID BROWS LED Brows [pdfLeiðbeiningarhandbók VERSION 1.3, BROWS LED Brows, BROWS, LED Brows, Brows |